Where is the fuel filler cap switch of the Bestune T77?

1 Answers
ReeseLee
07/29/25 11:34pm
The fuel filler cap switch of the Bestune T77 is a pull handle located between the driver's seat and the door, marked with a fuel pump symbol. Lifting it upwards will open the fuel filler cap. Below is a detailed introduction about the Bestune T77: The Bestune T77 is the most disruptive model in the Bestune lineup, featuring a striking exterior design. Among compact SUVs, few models can rival it. Its main characteristics are as follows: 1. Exterior: The vehicle adopts the currently popular floating roof design, with a sharp waistline running from front to rear, complemented by 19-inch alloy wheels for a harmonious look. The front grille features a dot-matrix chrome design, with the new Bestune logo positioned at the center. 2. Interior: The cabin boasts a high-tech aesthetic, highlighted by dual 12.3-inch connected screens. The dashboard is covered with soft-touch materials, while the door panels and center console sides are wrapped in leather. 3. Powertrain: It is equipped with a 1.2L turbocharged engine paired with a 7-speed dual-clutch transmission, delivering satisfactory overall performance, though throttle response is slightly sluggish during initial acceleration.
Was this review help?
8
0
Share
More Forum Discussions

Where to Add Windshield Washer Fluid in a Car?

Under the car's hood, the small blue cap is where you add windshield washer fluid. The method to add windshield washer fluid is as follows: 1. Turn on the wiper switch, and the windshield washer fluid will spray out from below the front windshield; 2. Continue until the spray nozzles stop spraying, then open the windshield washer fluid filler cap and add a small amount of washer fluid; 3. Turn on the wiper switch again to clear out the remaining washer fluid; 4. When the spray nozzles no longer spray fluid the second time, add 4 liters of windshield washer fluid, then securely close the filler cap. The functions of windshield washer fluid are: 1. To clean debris off the windshield; 2. To lower the freezing point of the liquid; 3. To ensure the windshield is clear and transparent, providing a clear view; 4. To eliminate static charges on the glass surface; 5. To reduce friction between the wipers and the glass, preventing scratches.
9
5
Share

Which Button is the Car Air Conditioning Button?

The car air conditioning button is the AC button. The functions of the car air conditioning are: 1. Cooling, heating, ventilating, and purifying the air inside the car; 2. Providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. Maintenance methods for car air conditioning: 1. Clean the air vents promptly; 2. Maintain the air conditioning condenser in a timely manner; 3. Clean or replace the air conditioning filter regularly. Proper usage methods for air conditioning: 1. Turn off the air conditioning when driving at low speeds; 2. Avoid smoking when the air conditioning is on inside the car; 3. Turn off the engine before turning off the air conditioning; 4. Immediately activate the recirculation mode when entering the car in summer.
18
4
Share

Does the car throttle need to be matched after cleaning?

After cleaning the car throttle, it needs to be matched. The steps for cleaning the throttle are: 1. Turn off the ignition switch and remove the negative terminal of the battery; 2. Remove the throttle cable, intake hose, and screws fixing the throttle in sequence; 3. Clean the throttle with a cleaning agent, and use a cotton swab to wipe areas that are hard to reach. The throttle is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to perform work. The effects of a dirty throttle include: 1. Engine shaking during idle; 2. Insufficient power when driving; 3. Increased fuel consumption; 4. The vehicle is prone to stalling; 5. Emissions do not meet standards.
19
0
Share

What is the function of a car's activated carbon canister?

The function of a car's activated carbon canister is to prevent fuel vapors from escaping into the atmosphere after the engine stops running. The working principle of the activated carbon canister: When the engine is running, the ECU controls the opening and closing of the carbon canister solenoid valve based on signals such as engine speed, temperature, and air flow to regulate the vacuum level in the upper part of the emission control valve, thereby controlling the valve's opening. When the emission control valve opens, fuel vapors are drawn into the intake manifold through the valve to participate in combustion. Notes on the activated carbon canister: Owners may encounter difficulty starting the engine due to an overfilled fuel tank, which could indicate a problem with the gasoline evaporation control system where the carbon canister is located.
11
5
Share

What are the differences between China 5 and China 6?

The differences between China 5 and China 6 emission standards are as follows: Different emission standards: China 6 emission standards are more than 30% stricter than China 5. Excluding the influence of driving conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The China 5 standard was implemented nationwide on January 1, 2017, as the fifth stage of national motor vehicle emission standards. China 6 was implemented starting July 1, 2019. Different principles: During the China 5 stage, diesel and gasoline vehicles had different emission standards, but China 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. Different issuing departments: The China 5 standard was issued by the Ministry of Environmental Protection. The China 6 standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China 5 is represented by 'V', while China 6 is represented by 'VI'. Different monitoring requirements for plug-in hybrid electric vehicles: Compared to China 5, China 6 has improved monitoring requirements for plug-in hybrid electric vehicles, including regulations on energy storage systems, thermal management systems, brake regeneration, drive motors, generators, etc. China 5 standard limits are as follows: Gasoline vehicles must not emit more than 1,000 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM (particulate matter) per kilometer driven. China 6 has two standards: China 6a and China 6b, as follows: China 6a standard limits: Gasoline vehicles must not emit more than 700 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM per kilometer driven. China 6b standard limits: Gasoline vehicles must not emit more than 500 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 milligrams of PM per kilometer driven. Affected by the China 6 emission policy, although China 5 vehicles are not currently restricted from normal use, such as travel or license plate restrictions, their resale value is significantly impacted. For truck owners who purchase vehicles on loan for cargo transport, the depreciation of the vehicle after paying off the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China 6 vehicles, which have a longer service life and more road rights, offer greater advantages.
15
4
Share

What are the symptoms of damaged car spark plugs?

Car spark plug damage symptoms include: 1. Difficulty starting; 2. Low power; 3. Excessive exhaust emissions; 4. Increased fuel consumption. The working principle of spark plugs is: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block through the cylinder head. The electrode repeatedly generates electrical pulses, creating a high-voltage pulse that ionizes the air between the two electrodes, forming a spark and causing an explosion to ignite the air-fuel mixture in the cylinder, thereby starting the engine. Types of spark plugs include: 1. Standard spark plugs; 2. Projected insulator spark plugs; 3. Electrode-type spark plugs; 4. Seat-type spark plugs; 5. Pole-type spark plugs; 6. Surface-gap spark plugs.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.