···
Log in / Register

Where is the fuel filler cap located on the Ford Edge?

4 Answers
DiIker
07/29/25 2:40am

Ford Edge's fuel filler cap is opened on the fuel tank cover. When the vehicle is unlocked, simply press the fuel tank cover to open it. The dimensions of the Ford Edge are: length 4878mm, width 1925mm, height 1734mm, with front and rear wheel tracks of 1648mm. It has a fuel tank capacity of 69 liters and a trunk capacity ranging from 947 to 2039 liters. The Ford Edge is equipped with a 2.0T turbocharged engine, delivering a maximum power of 180kW at 5500rpm and a maximum torque of 390Nm, paired with an 8-speed automatic transmission.

Was this review help?
1
2
Share
SanWalker
08/12/25 12:51pm

When I first drove the Ford Edge, I also figured this out. There's usually a small lever or button marked with a fuel pump icon on the inner side of the driver's left door pillar, near the floor. Just pull or press it, and the fuel filler door will pop open automatically. Remember to turn off the engine and park in a safe spot before operating to avoid any accidents. The Edge's design is quite user-friendly—the interior switch helps prevent theft, much more convenient than older models that required a key. It’s super simple to operate—just one pull and it’s done in seconds. After refueling, manually close the cap, but don’t slam it to avoid damage. It’s a good habit to regularly check if the switch works smoothly to ensure no hiccups when needed. Always prioritize safety, and don’t drag the process too long.

Was this review help?
18
1
Share
Expand All
McLilliana
10/02/25 4:34am

The fuel filler cap release for this car is conveniently located on the driver's side, near the door pillar – it's that noticeable small lever. Just pull it until you hear a click, indicating the cap has opened. It's straightforward, even for beginners. This design prevents accidental opening while driving, and remember to keep the engine off during refueling for safety. If unsure about its location, check the inner door panel or lower corner of the center console – sometimes the button has an icon. The Edge's system is stable and reliable, rarely malfunctioning; occasional dust buildup can be resolved with a simple wipe to restore sensitivity. Note that after operation, the fuel cap pops out externally – manually close it securely. Regular maintenance ensures longevity and hassle-free driving.

Was this review help?
7
1
Share
Expand All
DelDeclan
11/15/25 6:18am

The fuel filler cap switch on the Edge is always on the lever to the left of my seat. Just pull it, super easy—no need to search around. Much better than older cars, convenient and time-saving. Remember to park and turn off the engine before operating, safety first. After the cap pops open, close it manually—durable and practical. Remember the location, next time you refuel just go for it, no delays.

Was this review help?
5
3
Share
Expand All
More Forum Discussions

What is the reason why the Mercedes-Benz does not move in D gear?

Reasons why the Mercedes-Benz does not move in D gear: Functional comprehensive failure: When the car does not move after shifting gears, it is a functional comprehensive failure involving the clutch, transmission, and drive axle. When diagnosing, the fault location should be determined first. You can start by checking the condition of the two wheels. Starting in gear, the drive shaft does not rotate: If the car does not move when starting in a certain gear and the drive shaft does not rotate, it indicates that the fault is in the transmission. Remove the transmission cover and inspect whether the transmission shift fork is broken or whether the guide block fixing screws are loose. Here are the related content introductions: Gear shifting experiment: If the above checks are normal, proceed with the gear shifting experiment. If the second shaft does not rotate in a certain gear, it means the half-round key of that gear's gear is cut off. If the second shaft rotates in direct gear but does not rotate in other gears, it indicates that the support bearings at both ends of the intermediate shaft are disassembled and the intermediate shaft has fallen.
20
4
Share

What gear should be used when going uphill in Subject 1?

When going uphill in Subject 1, you should shift to a lower gear and press the accelerator pedal. Below are some key points to note when driving uphill: 1. Key points for climbing the slope: If the road is flat before the uphill section, you can appropriately increase the speed when traffic conditions allow, using the inertia generated by high-speed driving to climb the slope. The climbing distance can last up to several 10,000mm. 2. Key points for shifting gears: After climbing the slope for a certain distance, the vehicle may start to lose power, and the engine will show obvious lack of power. This is the right time to downshift. At this point, you should quickly and accurately shift to a lower gear, usually second gear is more suitable. When shifting gears, ensure the action is swift and accurate without hesitation. Inaccurate or delayed shifting can easily cause the vehicle to stall or roll backward. Therefore, the gear shift must be successful in one attempt. 3. Key points for accelerating: After shifting gears, the throttle should be quickly applied because the resistance to the vehicle's forward movement is already quite significant, and the required power should correspondingly increase. Only a low gear and high throttle can ensure sufficient climbing power. 4. Key points for speed: The speed should be low and steady. If the slope continues for hundreds or even thousands of meters, maintain a low gear and high throttle to climb the slope at a consistent speed. Stay in the gear where the engine operates normally until reaching the top of the slope, avoiding sudden speed changes or frequent gear shifts.
4
2
Share

Does the Honda Inspire have an underbody guard?

The Honda Inspire does not come with an underbody guard. Functions of the underbody guard: The primary functions of an underbody guard are to protect against impacts, rust, and corrosion. While driving, road debris such as flying stones and gravel can strike and scrape the car's underbody, causing damage. The underbody guard effectively shields against such impacts, protecting the underbody. In humid climates, the underbody is prone to water accumulation and corrosion, leading to rust and damage. The underbody guard covers exposed metal, forming a protective layer that isolates it from external elements. Additionally, much of the noise heard inside the car while driving comes from the underbody, and the underbody guard can help reduce noise. Advantages of the underbody guard: Protection against corrosion, stone impacts, vibrations, heat insulation, noise reduction, lower maintenance costs, and prevention of underbody scraping. Installation method for the car underbody guard: The installation involves lifting the vehicle, aligning the guard with the mounting points, and securing it with screws. Adding an underbody guard can reduce the risk of underbody damage from scrapes and impacts. It also prevents the intrusion of mud and sand, effectively protecting the engine. Furthermore, it guards against rain, snow, and acidic water, preventing premature aging, corrosion, and rust of the engine or related underbody components.
1
5
Share

What to Do If Your Car Has a Flat Tire in the Middle of the Night?

If your car has a flat tire in the middle of the night and you don't know how to change the spare tire, you can park the car in a safe area, turn on the hazard lights, and use a jack to lift the flat tire while waiting for assistance. Call a 24-hour roadside assistance service, but note that the cost will include both the tire repair fee and the towing or service fee. Below are the functions of a tire pressure monitoring system: 1. Prevent Accidents: The tire pressure monitoring system is a type of active safety device that alerts the driver in time when there are signs of danger in the tires, allowing them to take appropriate measures and avoid serious accidents. 2. Extend Tire Lifespan: With a tire pressure monitoring system, you can ensure that the tires always operate within the specified pressure and temperature range, thereby reducing tire damage and extending their lifespan. Studies show that driving with underinflated tires reduces tire life by 15% when the pressure is 10% below the normal value. 3. Improve Fuel Efficiency: When tire pressure is too low, the contact area between the tire and the road increases, leading to higher friction resistance. If the tire pressure is 30% below the standard value, fuel consumption can increase by 10%. 4. Reduce Suspension System Wear: Overinflated tires reduce the tire's own shock absorption effect, increasing the burden on the vehicle's suspension system. Long-term use under such conditions can cause significant damage to the engine chassis and suspension system. Uneven tire pressure can also lead to braking deviation, further increasing wear on the suspension system.
11
5
Share

What Causes the Sunroof Leakage in Audi A1?

Car sunroofs are prone to leakage due to the following reasons: Maintenance Timing: Prolonged lack of maintenance can cause the sunroof sealing strips to age; Driving Conditions: Driving on bumpy roads with the sunroof fully open can lead to excessive vibration between the sunroof and the sliding rails, causing component deformation; Drainage Pipe: Clogged drainage pipes. Methods to address sunroof leakage include: Replacing Seals: Replace the sunroof sealing strips; Cleaning the Sunroof: Remove small sand particles and dust from the sunroof drainage channels. Maintenance methods for car sunroofs are: Regular Inspection: Periodically check the condition of the sunroof rails to ensure they are functioning properly; Reduce Usage Frequency: Minimize the frequency of sunroof usage; Timely Inspection: Before the rainy season, check the drainage status of the sunroof to ensure it is normal.
1
2
Share

What is the emission standard of the 2013 Buick Excelle?

2013 Buick Excelle meets the China IV emission standard. The 2013 Buick Excelle is a compact car with the following dimensions: length 4515mm, width 1725mm, height 1445mm, wheelbase 2600mm, minimum ground clearance 125mm, and curb weight 1210kg. It features a MacPherson strut front suspension and a twin-link independent rear suspension. Powered by a 1.5L naturally aspirated engine, it delivers a maximum horsepower of 113PS, peak torque of 141Nm, and maximum power output of 83kW, paired with a 5-speed manual transmission.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.