Where is the fuel filler cap button on the Lynk & Co 03?

1 Answers
LaLola
07/30/25 10:08am
The Lynk & Co 03 does not have a fuel filler cap button. This vehicle features an externally-opening fuel tank cap design, meaning there is no interior switch button. To open it, you must first unlock the vehicle, then simply press the fuel tank cap to release it. The cap mechanism contains a spring-loaded locking system that prevents opening when the car is locked. The Lynk & Co 03 is built on the CMA platform jointly developed by Geely and Volvo. It comes equipped with either a 1.5T three-cylinder or 2.0T four-cylinder engine. The vehicle dimensions are 4658mm (length) × 1840mm (width) × 1459mm (height), with a wheelbase of 2730mm.
Was this review help?
13
2
Share
More Forum Discussions

What is the fuel tank capacity of the Peugeot 4008?

The 2022 Peugeot 4008 has a fuel tank capacity of 53 liters. The 2022 Peugeot 4008 is equipped with a 1.8-liter turbocharged engine, paired with an automatic transmission (AT), and features a front-wheel-drive system across all models. In comparison with similar models, the 2021 Skoda Kodiaq TSI330 5-seater two-wheel-drive standard version has a fuel tank capacity of 60 liters, while the 2021 Mazda CX-4 2.0L automatic two-wheel-drive Skyactiv Youth Edition has a fuel tank capacity of 45 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the dashboard, which is marked with 'E' and 'F'. When the needle is close to 'E', it indicates low fuel, and when it is near 'F', it means the fuel level is sufficient.
17
1
Share

Is It Normal for a Car Blower Resistor to Get Hot?

It is normal for a car blower resistor to get hot. The function of the car blower is to blow the cold air from the air conditioning evaporator or the hot air from the heater core into the car. When the blower is turned on, if the lowest temperature is selected, the outside air drawn in through the external circulation will be at the ambient temperature, which might be slightly higher because the air intake for the external circulation is usually located between the windshield and the engine compartment, increasing the temperature of the incoming air. Below are the functions of a car air conditioning system: 1. Temperature Regulation: This is the primary function of car air conditioning. In summer, the cooling system produces cold air to lower the temperature inside the car. In winter, except for large commercial vehicles that use independent combustion heaters, most vehicles utilize waste heat from the engine for heating. 2. Humidity Regulation: Humidity greatly affects passenger comfort. The humidity inside the car should generally be maintained between 30% and 70%. Standard car air conditioning systems do not have the capability to regulate humidity; this can only be achieved through ventilation or by using advanced luxury car systems that integrate heating and cooling. 3. Airflow Regulation: The speed and direction of airflow significantly impact comfort. If air is blown directly, the speed should be limited to a certain range when the temperature is appropriate. The speed can be adjusted based on passengers' living environment, age, health, and personal preferences. 4. Air Purification: The quality of air inside the car is crucial for comfort.
11
1
Share

What to Do If 95 Gasoline Is Mistakenly Filled with 92?

If 95 gasoline is mistakenly filled with 92, no special maintenance is required. Simply refuel with the appropriate gasoline grade as required by the vehicle. Here are specific details about car refueling: 1. Although 95 gasoline has higher anti-knock properties and power, vehicles designed for lower grades should not blindly opt for higher-grade gasoline. Higher grades are more suitable for engines with larger compression ratios, while engines of 92 vehicles usually have smaller compression ratios. Using 95 gasoline may increase engine knocking. 2. Mixing different grades of gasoline, such as 92 and 95, is not recommended. Long-term use of mixed gasoline could potentially affect the engine, leading to phenomena like engine carbon deposits and increased fuel consumption.
12
2
Share

How Long Can a License Plate Number Be Retained After Vehicle Scrapping?

After a vehicle is scrapped, its license plate can be retained for two years if the original vehicle has been used for more than one year, meaning the original plate number can be used for motor vehicle registration within one year. Below is an introduction regarding vehicle scrapping: 1. If the vehicle is damaged and cannot be driven back to the place of registration: The owner of the motor vehicle may sell the scrapped vehicle to a motor vehicle recycling enterprise located where the vehicle is currently situated. When selling the vehicle, an application form must be filled out, and the motor vehicle registration certificate, license plate, and vehicle license must be submitted. The motor vehicle recycling enterprise should confirm the vehicle's identity and dismantle it, issuing the owner a "Scrapped Motor Vehicle Recycling Certificate." Scrapped school buses, large passenger vehicles, trucks, and other commercial vehicles must be dismantled under the supervision of the local vehicle management office where the scrapping occurs. 2. Motor vehicle recycling enterprise: The motor vehicle recycling enterprise must submit the application form, motor vehicle registration certificate, license plate, vehicle license, and a copy of the "Scrapped Motor Vehicle Recycling Certificate" to the local vehicle management office where the scrapping occurs within seven days of dismantling the vehicle, to apply for deregistration. The local vehicle management office where the scrapping occurs should review the submitted documents and certificates within one day of receiving them, retrieve the motor vehicle registration certificate, license plate, and vehicle license, and transmit the vehicle scrapping information to the registration place's vehicle management office via the computer registration system. The registration place's vehicle management office should process the deregistration within one day of receiving the vehicle scrapping information and issue a deregistration certificate.
8
4
Share

What is the normal tire pressure for the Hongqi H5?

The tire pressure for the Hongqi H5 is generally between 2.2 and 2.5. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, and impacts can cause internal cracks or blowouts, leading to tire bursts. Hazards of insufficient tire pressure: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation; Reduces the functionality of the cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire bursts; Increases tire deformation, making the tire sidewalls prone to cracks and generating flexing motion, leading to excessive heat, rubber aging, cord fatigue, and breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
3
4
Share

Which Button Opens the Trunk in a Car?

Here are the specific methods to open the trunk of a car: 1. Remote key from outside the car. The most common way to open the trunk from outside is by using the remote key. Simply press the button with the car trunk symbol (usually an upward arrow) on the key fob to open the trunk. Some car models may not have a dedicated trunk button on the remote, in which case pressing the unlock button will also open the trunk. 2. Interior control switch. The interior control switches for opening the trunk include button-type and lever-type. The location of button-type switches may vary depending on the manufacturer and car model, but they are generally found on the left side of the steering wheel or in the central control area. For example, in the Sagitar, the trunk button is usually located on the door. Some car models use a lever instead of a button, which is typically located on the lower left side of the driver's seat or the lower left side of the steering wheel.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.