Where is the fuel cut-off reset switch for the Roewe 550?

2 Answers
OClayton
07/28/25 11:51pm
Roewe 550 fuel cut-off reset switch is connected to the central door locking system. When the door lock is open, press the right side of the cover plate to open it, then slowly rotate the fuel tank filler cap counterclockwise. After refueling, reinstall the filler cap and tighten it until three clicks are heard to cut off. The Roewe 550 is a vehicle under SAIC Roewe, with dimensions of 4648mm in length, 1827mm in width, and 1483mm in height, and a wheelbase of 2705mm. The car is equipped with configurations such as the TST 6-speed oil-cooled dual-clutch automatic transmission system, Inkanet 3G digital intelligent network driving system, and StartStop digital intelligent start-stop energy-saving system.
Was this review help?
16
1
Share
LeAniyah
08/12/25 4:09am
As a seasoned auto mechanic, I frequently deal with issues like those in the Roewe 550. That model's fuel cut-off reset switch is located beneath the inner sill panel in the driver's footwell area. The precise position is near the door sill - you'll spot a small switch or button (usually concealed behind trim panels) by opening the door and crouching down. This safety device cuts fuel supply post-collision to prevent fires, requiring manual pressing to reset the system. When operating, ensure vehicle safety and gently press with gloves to avoid damage. After resetting, attempt engine startup to verify proper operation. Remember this compact component is vital for driving safety - regular vehicle inspections can prevent accidental activation.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Can You Still Drive with Low Tire Pressure?

It is not recommended to drive with low tire pressure. When a car's tire pressure is too low, the most obvious symptom is an increase in fuel consumption. Low tire pressure increases the friction between the tires and the road, thereby increasing rolling resistance, which leads to higher fuel consumption. Additionally, the amount of movement in the tires will also increase because the heightened friction causes the tire temperature to rise, making the tires softer and reducing their durability. There are generally three reasons for low tire pressure: 1. Thermal contraction due to low temperatures; 2. Air leakage from the tire; 3. The tire may be pinched or the tire edge may not be properly seated on the rim, resulting in poor tire sealing.
13
5
Share

How to Turn Off the Air Conditioning in Volkswagen Tayron?

Method to turn off the air conditioning in Volkswagen Tayron: Twist the AUTO button to the left to turn it off, and to the right to turn it on. The car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. The Volkswagen Tayron is a compact SUV with body dimensions of 4590mm in length, 1860mm in width, and 1660mm in height, and a wheelbase of 2731mm. The 2.0T version of the Volkswagen Tayron is equipped with the third-generation EA888DKV engine, which comes in two power variants: 330 and 380. The high-power version can output a maximum power of 162 kW and a maximum torque of 350 Nm, while the low-power version can output a maximum power of 137 kW and a maximum torque of 320 Nm.
4
3
Share

What Causes the Tire Pressure Warning Light to Come On?

The tire pressure warning light coming on indicates that the current pressure in one or more of the four tires is outside the normal range, signaling a potential tire pressure issue. This could be due to a puncture causing the tire pressure warning light to activate. The normal tire pressure range is between 2.3 and 2.5 bar. When the pressure drops below 1.8 bar, the tire pressure warning light will come on, prompting a visit to a 4S shop for inspection, tire repair, or inflation. Additionally, a malfunctioning tire pressure sensor can also trigger the warning light. If the internal battery of the sensor is depleted and the control unit fails to receive the sensor's signal, the warning light will illuminate. Similarly, if the control unit itself is faulty, it can cause the tire pressure warning light to come on, regardless of the actual tire pressure.
19
4
Share

How to reset the tire pressure on Lavida Plus?

The method to reset the tire pressure on Lavida Plus: First, find the settings in the central control screen, then locate 'car', click into it and there will be an option for tire pressure reset, which allows you to reset it; Alternatively, you can find the tire with abnormal pressure, inflate it, and after driving a few kilometers, the tire pressure warning light will automatically turn off. The tires are the only parts of the car that come into contact with the ground, and they are crucial for driving safety and stability. It is recommended that car owners regularly check the tire pressure and also inspect the tire surface for any damage. Tires are made of rubber and will age over time, so it is advised to replace them every four years. The body dimensions of the Lavida Plus are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm.
20
4
Share

What is the function of car cruise control?

Car cruise control, also known as speed control system or autonomous driving system, functions to automatically maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a constant speed. With this device, drivers no longer need to manually control the speed during long-distance highway driving, reducing fatigue and unnecessary speed changes, which can save fuel. When the cruise control button is pressed, the car will maintain the set speed. Pressing the brake pedal immediately deactivates this function. In addition to using the brake pedal to cancel the function, there are also cancellation functions via the parking brake, clutch, and speed adjustment lever operation switch.
17
5
Share

What does the AC button in a car air conditioner mean?

The AC button in a car air conditioner is the switch for the cooling function. When cooling is needed, press the AC button and adjust the temperature selector to the blue section, then turn on the fan switch to allow cold air to blow out. For automatic air conditioners, you can also press the AUTO button simultaneously, and the system will automatically adjust the cabin temperature. A car air conditioning system consists of more than just the compressor; it also includes components like the condenser, evaporator, and expansion valve. The compressor is one of the main components of the refrigeration system, responsible for compressing and transporting refrigerant vapor. The installation rate of air conditioning in domestic passenger cars has reached nearly 100%, and it is also increasing year by year in other vehicle types. Car air conditioning has become an essential functional component in automobiles.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.