Where is the front tow hook on the Haval H6 Sport version?
2 Answers
Haval H6 Sport version's front tow hook is located under the middle of the front bumper on the chassis, corresponding to the position behind the grille emblem, deeply recessed and welded to the subframe. Towing precautions: Attach the tow rope to the tow hook, being careful not to damage the vehicle body. The distance between the towing vehicle and the towed vehicle should be more than 4 meters but less than 10 meters. A white cloth strip (minimum 0.3m×0.3m) should be tied to the middle of the tow rope. Towing procedure: Turn on hazard warning lights, release parking brake, and wait for towing. For vehicles equipped with 7DCT300, towing speed should not exceed 35 km/h with a maximum towing distance of 80 km. For vehicles equipped with GW7DCT1-A01/A02, towing speed should not exceed 30 km/h with a maximum towing distance of 50 km.
The front tow hook position of the Haval H6 Sport version is relatively fixed, usually located beneath the front bumper chassis, near the center or slightly to the left/right side. There's a small plastic cover concealing it, which needs to be removed to access or install the hook. I recommend squatting at the front of the vehicle and looking underneath the bumper – you'll typically spot a round or square-shaped cover plate designed to be discreet without compromising aesthetics. However, don't overlook routine maintenance like periodically clearing mud or checking if the cover is loose to prevent clogging or difficulty locating it during emergency rescues. The detailed diagram can be found in the vehicle's manual provided upon purchase. If you can't locate it, refer to that booklet or ask the technician to demonstrate during your next maintenance service – it's simple, easy to remember, and foolproof.
