Where is the front bumper of a car located?

1 Answers
StAngelina
07/30/25 7:01am
The front bumper of a car is located at the front of the vehicle, positioned as a crossbeam between the two fog lights below the grille. Below is relevant information about the bumper: 1. Function: The front and rear ends of a car are equipped with bumpers, which not only serve a decorative purpose but, more importantly, act as safety devices that absorb and mitigate external impacts, protecting the vehicle body and ensuring the safety of passengers. 2. Material: The outer panel and cushioning material are made of plastic, while the crossbeam is formed from cold-rolled steel sheets approximately 1.5mm thick, pressed into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the vehicle frame's longitudinal beams via screws, allowing for easy removal. The plastic used in these bumpers primarily consists of polyester and polypropylene materials, manufactured through injection molding.
Was this review help?
15
3
Share
More Forum Discussions

What to Do About Bubbles in Rear Window Tint Film?

The solutions for bubbles in rear window tint film are as follows: 1. If bubbles appear shortly after applying the rear window film, and the bubbles usually contain white spots, it is due to improper handling of moisture between the film and the glass during application. The trapped moisture will evaporate and form small white bubbles the next day or over time, but the bubbles will not be large or numerous. This situation does not affect normal driving, and the bubbles will disappear once the moisture evaporates. 2. If bubbles appear several years after application and become increasingly numerous and larger, it may be due to the use of low-quality film. Over time, exposure to UV rays can cause the release of toxic gases like formaldehyde, leading to bubble formation. In such cases, the film should be replaced as it can harm health and should no longer be used. 3. Other reasons include poor film quality, such as aging adhesive layers, rough film structure, or easy detachment, which can cause bubbles or ripples under UV exposure. While this does not affect health, it impacts the car's appearance, so it is advisable to replace the film with a higher-quality one.
11
2
Share

What car has a straight-line taillight at the rear?

The car with a straight-line taillight at the rear is Lincoln. Identifying car models by taillights: The BYD Qin has bow-shaped taillights with LED light sources that are extremely bright. The new Mercedes-Benz S-Class features small wing-shaped taillights with linear lighting. The Volvo XC60 and XC90 have long vertical taillights with higher recognition when the brake lights are on. Introduction to Lincoln cars: Lincoln (LINCOLN) is a luxury car brand under the American automobile company Ford, founded in 1917 by Henry Leland. The brand is named after U.S. President Abraham Lincoln. Since 1939, starting with President Franklin D. Roosevelt, Lincoln cars have been selected as presidential vehicles by the White House due to their outstanding performance, elegant design, and unparalleled comfort. Its most famous model is the parade car used by President Kennedy. Notable Lincoln models include: MKC, MKZ, Continental, MarkⅧ, Town Car, and Navigator. Most Lincoln cars used in China belong to the 'Town' series.
6
5
Share

What is the fuel consumption of the Audi A6 2.4?

The fuel consumption of the Audi A6 2.4 is 12 liters per 100 kilometers. In addition to the 2.4-liter naturally aspirated engine, there is also a 2.0-liter turbocharged engine. 1. The 2.4-liter naturally aspirated engine is a V6 engine with a maximum power of 130 kW, a maximum torque of 230 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed ranging from 3000 to 5000 rpm. This engine is equipped with a variable valve timing system and a variable intake manifold system, and it uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 2. The 2.0-liter turbocharged engine has a maximum power of 125 kW, a maximum torque of 280 Nm, a maximum power speed ranging from 4300 to 6000 rpm, and a maximum torque speed ranging from 1800 to 4200 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. It is paired with either a 6-speed manual transmission or a CVT transmission.
7
1
Share

How Many Pages Does a Driver's License Have?

A driver's license consists of two pages: the 'Motor Vehicle Driver's License of the People's Republic of China' and the 'Supplemental Page of the Motor Vehicle Driver's License of the People's Republic of China.' Below are detailed descriptions regarding the driver's license: Classification: The Ministry of Public Security officially issued the 'Regulations on the Work of Motor Vehicle Driver's License Services,' which introduced a grading system for motor vehicle driver's licenses, dividing them into 15 levels: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. Renewal Rules: If a motor vehicle driver has not accumulated 12 penalty points in any scoring period during the six-year validity period of the driver's license, they will be issued a driver's license with a ten-year validity period. If they continue to avoid accumulating 12 penalty points in any scoring period during the ten-year validity period, they will be issued a long-term valid driver's license. Content: The motor vehicle driver's license records the holder's ID number, name, gender, date of birth, permanent address, nationality, permitted driving (learning) vehicle type code, initial issuance date, validity period, and management records. It also includes the issuing authority's seal, file number, and the holder's photo. The design of the motor vehicle driver's license is specified by the Ministry of Public Security.
13
2
Share

Do Right-Turn Only Lanes Need to Obey Traffic Lights?

Right-turn only lanes need to obey traffic lights. Specific conditions vary at intersections: You should observe traffic lights as each intersection has different configurations, depending on the road layout and traffic light setup. Right-turn specific signals: Determine whether the red light is specifically for right turns. If it is a right-turn only signal, you must stop and wait for the green light before proceeding. According to traffic regulations, vehicles turning right at intersections without dedicated right-turn signal restrictions may proceed after yielding to oncoming traffic and ensuring pedestrian safety. However, if there is a dedicated right-turn signal at the intersection, you must follow its instructions. Notes for intersections with early right turns: At intersections with early right-turn lanes, you generally just need to watch for passing vehicles and turn right when safe. Since these lanes are dedicated and positioned early, you don't need to observe the main intersection's traffic lights, especially right-turn red lights, as those signals apply to vehicles that proceed straight to the intersection before turning right. At early right-turn intersections, pay attention to small traffic lights posted at the lane and check whether there's a stop line in the right-turn lane. If there are traffic lights with a stop line, you must absolutely follow the signal instructions to proceed.
14
1
Share

What is the fuel tank capacity of Citroen C2 in liters?

The fuel tank capacity of the Chevrolet C2 is 50L, as per official data. The Chevrolet C2 uses 92-octane gasoline, with a fuel consumption of 6.4-7.1L per 100 kilometers. A full tank can cover a distance of 704-781km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is recommended to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel may exceed the calibrated tank capacity.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.