···
Log in / Register

Where is the frame number of Shenghao electric four-wheeled vehicle?

4 Answers
DeAthena
07/29/25 10:49pm
The frame number is generally located at the lower left corner of the windshield, on the right side of the passenger seat, and in the engine compartment. Frame number: The Vehicle Identification Number (VIN), or frame number, is a unique set of seventeen letters or numbers used on a vehicle to identify the manufacturer, engine, chassis serial number, and other performance data. To avoid confusion with the numbers 1, 0, and 9, the letters "I", "O", and "Q" are not used. The 10th digit representing the model year does not use "I", "O", "Q", "U", "Z", or "0". Meaning of the frame number: Digits 1 to 3 (WMI) represent the world manufacturer identifier, indicating who produced the vehicle. Digits 4 to 6 represent the vehicle type, configuration, and body code. Digits 7 to 9 indicate the engine type code, transmission type, check digit (usually represented by numbers 0 to 9 or the letter "X"). Digits 10 to 11 represent the vehicle's "manufacture date", which is generally close to the actual year, and the assembly plant (0 represents original factory assembly). Digits 12 to 17 are the production sequence number, indicating the vehicle's production batch.
Was this review help?
12
3
Share
ReaganLee
08/16/25 12:19am
I often help my friends locate their electric vehicles. For example, the frame number of a Shenghao electric quadricycle is usually on the small plate by the little window at the lower left corner of the windshield. You can find it by looking carefully from the outside. If you're unsure, crouch down and use your phone's flashlight for a clearer view. There might also be a sticker on the B-pillar inside the door—just open the left front door to see the label. Be careful not to erase or cover it. The location is similar to traditional cars, but this number is crucial for ownership transfer and anti-theft purposes, so I recommend owners jot it down and take a photo as a backup in case it gets lost. Additionally, there might be backup markings near the battery compartment, but the main location is always fixed. If you can't find it for a long time, it might be obscured by weather stains and needs regular cleaning to remain legible.
Was this review help?
2
3
Share
Expand All
AaliyahRose
10/18/25 5:12am
Last time my neighbor's car had the same issue, and we went together to check it out. We found that Sheng Hao electric vehicle's VIN is usually located on a small label attached to the frame after opening the left front door, or you can directly look at the lower left corner of the windshield. Having driven similar models myself, I know that electric vehicles have simpler structures, but the safety design requires the VIN to remain unobstructed. I recommend checking it after parking and turning off the engine—this is both safe and convenient. Avoid doing it while driving. The VIN is crucial for annual inspections and insurance claims. If it's hard to read, you might need to clean the label with a cleaning agent or refer to the diagrams in the vehicle manual. The Sheng Hao four-wheel vehicle maintenance manual usually provides detailed instructions on the location. If the car is newly purchased, the label will be clearer, but over time it might get dirty or damaged. Address this early to avoid complications.
Was this review help?
10
3
Share
Expand All
DelArabella
12/01/25 5:50am
The chassis number of electric vehicles like Sheng Hao's four-wheel design is usually the same. I've noticed it's typically located at the far left corner of the front windshield or on the outer frame of the car door, making it quick and easy to find without tools. Since electric vehicles don't have an engine, the label position is clearer. The key is to prevent moisture corrosion; regularly inspect and maintain it. If you find it blurred, contact the service center immediately for a replacement—don't delay safety matters. The chassis number information helps prevent theft, and when selling the car, buyers should verify it carefully to ensure the vehicle's legal source. This is equally crucial for electric vehicles, as eco-friendly models are popular now, but the identification code is indispensable.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

Will the Haval H6 automatically lock when the driver leaves?

Haval H6 will automatically lock after the owner leaves. Here are the specific details about the Haval H6: 1. Vehicle Positioning: The Haval H6 is positioned as a compact SUV, available in Blue Label and Red Label versions. 2. Powertrain: It is equipped with two engines: a 1.5T and a 2.0T. The 1.5T engine has a maximum power of 124kW and a peak torque of 285Nm, while the 2.0T engine delivers a maximum power of 145kW and a peak torque of 355Nm. 3. CVVL Technology: The 1.5T engine features CVVL technology. CVVL technology primarily adjusts the valve opening and closing time, valve lift, and duration, ensuring sufficient air intake under various engine conditions, thereby improving engine efficiency.
19
0
Share

What are the tips for novice drivers driving on national highways?

Novice drivers driving on national highways should pay attention to the following tips: The most important thing is to adjust your driving mindset, drive according to regulations, and display a novice driver sign. Additionally, avoid driving behind large trucks for extended periods. Since the road conditions on national highways can be complex, always be prepared to slow down. Novice drivers should note the following when driving on national highways: 1. Drive as close to the center line as possible: When there are no other vehicles, try to drive near the center line, positioning yourself as if you are sitting on the center line. This provides more room to maneuver in case of unexpected situations on either side. 2. Remember to signal when overtaking: When overtaking, remember to use your turn signals and honk the horn in a short-long-short pattern, which sounds more friendly. Also, flash your headlights to alert the driver in front. 3. Slow down when approaching villages: Always reduce speed when passing through villages, as villagers may not be fully aware of traffic rules. 4. Avoid picking up strangers: When driving in unfamiliar areas, try not to give rides to strangers flagging you down.
1
5
Share

What are the reasons for the JMC SVS light being on and diesel engine power loss?

Here are the specific reasons for the JMC SVS light being on and diesel engine power loss: 1. Poor engine combustion state. 2. Engine knocking. 3. Poor quality of vehicle fuel. 4. Dirty engine cylinder interior with accumulated carbon deposits. 5. The electronic control unit cannot obtain engine data. Here is extended information about the JMC SVS light: 1. Function: The car SVS light is similar to the engine fault light. When the SVS indicator is on, it indicates that the engine control unit has detected an error signal from a sensor or that it is beyond the usage standard. When the ignition switch is turned on, the car SVS indicator light will come on for an automatic check and will turn off automatically after a few seconds. 2. Working mode: When the vehicle's ignition key is turned on, the onboard computer will perform a self-check and this light will come on, and it will turn off after the vehicle is started; when the engine ECU detects a fault, the SVS light will come on; if this light comes on while the vehicle is in motion, it indicates that there is a fault with the vehicle's engine.
6
1
Share

What is the correct method for defogging a car?

Methods for defogging a car are as follows: 1. Air conditioning defogging: Turn on the front window defogging mode, set the fan speed to maximum, turn on the A/C switch, and then adjust the temperature to the lowest setting. The fog on the glass will be eliminated shortly. Additionally, some models are equipped with electric heating for the rear windshield and exterior rearview mirrors. Simply click the switch to turn it on, and the fog will be cleared in about a minute. 2. Air convection: Opening the windows can increase air convection, reduce the temperature difference between the inside and outside of the car, and weaken the conditions for fog formation. 3. Defogging spray: When using, simply spray it evenly on the glass surface and then wipe it clean with a dry towel. The principle is to use surfactants to leave a protective film on the glass surface, altering the surface tension of water molecules and causing fog droplets to coalesce into larger droplets, thus not obstructing vision. This can also be used on other car glass surfaces, especially the exterior rearview mirrors. 4. Homemade defogging spray with dish soap: Mix dish soap and water in a 1:6 ratio in a bottle, spray and wipe before traveling. The effect is comparable to commercially available defogging sprays, though the durability is slightly inferior.
5
2
Share

How to Clear the Car Maintenance Reminder?

Clearing the car maintenance reminder can be done as follows: 1. First, turn off the car's ignition, then press and hold the SET button on the right side of the car's dashboard with your left hand. 2. While holding the "SET" button, turn on the ignition. 3. Then release the "SET" button and press it once more. 4. Finally, turn off the ignition and then turn it back on to complete the process of clearing the maintenance reminder. Additional Information: 1. During every routine car maintenance, the oil filter must be replaced. For cars driven in areas that are not particularly dusty, the air filter can generally last for 20,000 kilometers, requiring only cleaning at the 7,500-kilometer mark. The lifespan of the fuel filter depends on the quality of the fuel used. If you consistently refuel at reputable gas stations and do not experience fuel supply issues, you can consider replacing it after more than 20,000 kilometers. 2. Under normal usage conditions, brake pads can last for 30,000 to 40,000 kilometers, and the original battery can last for 3 to 4 years. There are various types of spark plugs: standard nickel alloy spark plugs can last for 20,000 to 30,000 kilometers, platinum spark plugs for 80,000 to 100,000 kilometers, and iridium spark plugs for 30,000 to 40,000 kilometers.
15
0
Share

Why does the engine RPM drop slowly when releasing the throttle?

Reasons for slow RPM drop when releasing the throttle are as follows: 1. This may be caused by an over-rich air-fuel mixture in the engine, which can result from various factors; 2. It might be due to malfunctioning sensors. Proper engine operation relies on numerous sensors and electronic components - if certain sensors fail, it may cause abnormal engine performance. Below is relevant information about engine sensors: 1. Sensors around the engine include oxygen sensors, mass airflow sensors, intake air temperature sensors, camshaft position sensors, coolant temperature sensors, etc. 2. If any sensor malfunctions, it may cause the engine to exhibit an over-rich mixture condition, resulting in minimal RPM reduction when releasing the throttle pedal.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.