Where is the frame number of Opai?

1 Answers
Leilani
07/28/25 5:07pm
Opai's frame number is located below the front handlebar. The following is relevant information about the frame number: 1. Concept: The frame number, also known as the Vehicle Identification Number (VIN), is a unique code assigned for identification purposes. It consists of a 17-character alphanumeric code. The combination of these characters ensures that no two vehicles of the same model will have the same number within 30 years, making it a unique identifier for the vehicle, often referred to as the 'car's ID card.' 2. Location: (1) Except for trailers and motorcycles, it can be found on the door hinge pillar, door lock pillar, or one of the door edges near the driver's seat, fixed on the left side of the dashboard, inside the door, or near the driver's seat; (2) It should be easily readable without moving any vehicle parts, except for the outer door; (3) For most cars, the VIN can be found on the left side of the dashboard or below the windshield; (4) On the vehicle registration certificate, the new version usually prints the VIN under the 'frame number' column; (5) Other possible locations include insurance documents, various plates in the engine compartment, and the driver's side door pillar.
Was this review help?
9
3
Share
More Forum Discussions

What is the Difference Between Antifreeze and Water?

Antifreeze and water differ in their properties: antifreeze has the characteristics of being freeze-resistant and high-temperature resistant, while water has no such properties. The full name of antifreeze is antifreeze coolant, which serves two purposes. First, when the vehicle is not running, it prevents freezing because the antifreeze is inside the engine block. If the liquid turns into a solid, its volume expands, which can crack the engine block. The second purpose is to cool the engine after the vehicle starts, preventing the engine from overheating and causing damage. Antifreeze has a lower freezing point than water, better freeze resistance, a higher boiling point, and superior evaporation resistance compared to water. When the engine is running, it operates at high temperatures. If water were used for cooling, since its boiling point is 100 degrees Celsius, it would evaporate into steam when the temperature reaches 100 degrees. The water level would gradually decrease, and once all the water evaporates, it would no longer be able to cool the engine, leading to engine damage.
16
1
Share

What does 342 on the valve tappet represent?

The number 342 on the valve tappet represents thickness. Here are the relevant details: 1. Hydraulic Tappet: The hydraulic tappet maintains constant contact with the camshaft, operating without any clearance. Inside the tappet, hydraulic pressure is used to adjust the clearance. The hydraulic tappet mainly consists of a plunger, a check valve, and a check valve spring. It stores or releases engine oil through the action of the check valve, and by altering the oil pressure within the tappet chamber, the working length of the hydraulic tappet can be adjusted, thereby automatically regulating the valve clearance. 2. Valve Tappet Cleaning Interval: The cleaning interval depends on various factors, such as the vehicle's driving environment, the control method of the fuel-injected engine, and air quality. Generally, cleaning is required every 20,000 to 30,000 kilometers. If the vehicle operates in a heavily polluted environment (mainly referring to inhalable particulate matter), impurities can quickly accumulate on the throttle body. Over time, this can affect the engine's air intake, necessitating cleaning. This phenomenon is most noticeable when starting the vehicle.
15
1
Share

Is a Rear-Ended and Repaired Car Sturdy?

Rear-ended and repaired cars can be sturdy as long as the craftsmanship is good. Below are the required materials for transferring ownership when buying a used car: 1. Seller's ID: Original and photocopy of the seller's personal ID card. 2. Buyer's ID: Original and photocopy of the buyer's personal ID card. 3. Vehicle documents: Original and photocopy of the vehicle's motor vehicle registration certificate. 4. Driving documents: Original and photocopy of the vehicle's driving license. Below is additional information on issues to be aware of when buying a used car: 1. Underinflated tires: When purchasing a used car, the buyer should walk around the car to check if any of the four tires are underinflated. 2. Tire quality: The buyer should observe whether the tire brands are consistent. 3. Front wheels: The buyer needs to inspect the vehicle's front wheels. 4. Wheel bearings: The buyer should check the used car's wheel bearings. After completing the used car transaction, the buyer should request the seller to promptly provide the relevant documents.
3
5
Share

What is the difference between a tachometer and an odometer?

Here are the differences between a tachometer and an odometer: 1. Position: Generally, the tachometer is on the left side and the speedometer is on the right. 2. Markings: The tachometer is marked from 0-6000 RPM, while the speedometer is marked from 0-220 km/h. Below is additional information: 1. Position: The odometer (mileage meter) is located below the tachometer and displays the distance traveled in numerical form. 2. Significance: The engine's RPM relates to the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with RPM. Therefore, when stating the engine's effective power, the corresponding RPM must also be specified.
9
1
Share

What Causes Auto Hold Failure?

Auto hold failure is caused by a malfunction in the ABS pump. Below is an introduction to related content: 1. Auto Hold: The foreign term for auto hold is AUTO-HOLD, which refers to an automatic braking function. When this function is activated, such as when stopping at a traffic light, it eliminates the need to pull the handbrake, simplifying operations by avoiding the use of the handbrake or electronic parking brake. For automatic transmission models, it also reduces the need for frequent shifting between D to N or D to P. 2. Precautions: Regardless of the situation when parking, it is essential to develop the habit of pulling the handbrake lever tightly when leaving the vehicle. When using the handbrake, the lever must be pulled tightly; otherwise, it is easy to forget to release it when starting, which can lead to severe wear on the rear brake pads if the vehicle is forced to move.
3
5
Share

What Causes Powertrain Failure?

When pressing the accelerator, you may notice insignificant acceleration and insufficient power. This condition most commonly occurs when the engine is overheated or overcooled, or when there is a lack of engine oil. Below are detailed explanations: 1. Power reduction: While driving, you may distinctly feel that the engine's acceleration is not significant when stepping on the accelerator, accompanied by a noticeable drop in power and audible noises. Possible causes include the engine being too cold or too hot, or lacking oil. Generally, when these symptoms appear, potential issues should be considered from aspects such as ignition wires, fuel filters, fuel pumps, air filters, gasoline, spark plugs, and carburetors. First, check if the air filter needs replacement, if the spark plugs have reached the end of their service life, if the ignition coil is damaged, or if there is excessive impurity in the gasoline. The fuel pump should also be inspected. 2. Deceleration or acceleration: The engine may emit a whirring sound, which changes with the engine's RPM. Possible reasons include insufficient power steering fluid—refill if necessary; potential damage to the generator's bearings; or similar noises caused by malfunctions in the water pump or power steering pump.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.