···
Log in / Register

Where is the frame number embossed code for the Great Wall Pao?

5 Answers
MacReese
07/29/2025, 06:03 AM

The frame number of the Great Wall pickup truck is located under the hood, inside the engine compartment, on the nameplate next to the battery. Below is the relevant introduction: 1. Frame number: The frame number, also known as the Vehicle Identification Number (VIN), is a unique set of seventeen letters or numbers used on a vehicle to identify the manufacturer, engine, chassis number, and other performance data. 2. Numbering: This number is like a car's fingerprint. It not only helps in recording issues and changes of ownership but also aids in theft prevention. To avoid confusion with the numbers 1, 0, and 9, the English letters 'I', 'O', and 'Q' are not used, and the 10th digit representing the model year does not use 'I', 'O', 'Q', 'U', 'Z', or '0'.

Was this review help?
15
1
Share
BriellaMarie
08/13/2025, 08:39 AM

I remember when I was helping my friend check his Great Wall Pao pickup truck, we ran into the issue of locating the VIN (Vehicle Identification Number) stamp. Generally speaking, the VIN acts like a vehicle's ID number, and the stamped version is etched onto the metal parts of the car body. For the Great Wall Pao, the VIN stamp is usually hidden in the engine compartment—common spots include the front wall of the engine or near the radiator frame. Sometimes, it can also be found on a label under the door frame on the passenger side. In my case, after popping the hood, I found it on the metal plate close to the windshield. A quick shine with a small flashlight made it clearly visible. The location of the VIN can vary depending on the model, and newer versions might have adjusted placements, but the core purpose remains anti-theft and easier vehicle inspection. I’d recommend wearing gloves to avoid scratching your hands while checking, and after noting down the VIN, don’t forget to review the vehicle’s history to ensure you’re not buying a problematic car. Though finding the stamped VIN might seem like a small task, it comes in handy for routine maintenance or resale. Knowing these little details makes car ownership a bit more reassuring.

Was this review help?
13
4
Share
Expand All
BrookeRose
10/06/2025, 10:38 PM

As someone who works with vehicles year-round, I often encounter many car owners asking about the location of the Great Wall Pao's VIN stamp. Common spots include metal components at the front of the engine compartment, such as the firewall or frame brackets—careful inspection will reveal the engraved marks. Why is the VIN important? It’s directly linked to vehicle identification and is essential for verifying information during purchases or ownership transfers. When checking, I recommend first ensuring the engine is off to avoid burns, then wiping away dust with a cloth for better visibility. The Great Wall Pao’s VIN stamp is practical in design but slightly hidden, so beginners might need extra effort to locate it. Don’t underestimate this—regularly inspecting the VIN can help detect potential issues early, like rust or repair marks. I usually teach friends simple tricks, such as using a magnifying glass or taking photos with a phone for records, making unexpected situations easier to handle. The VIN isn’t just numbers; it’s about safety and trust—paying attention to it never hurts.

Was this review help?
12
3
Share
Expand All
LaVanessa
11/19/2025, 11:02 PM

When I first bought my Great Wall Pao, I was also curious about where the VIN stamp was located. After searching online and consulting experienced drivers, I learned it's mainly engraved near the chassis or on the inner metal surface of the passenger door frame. The stamp appears as a small combination of numbers and letters, requiring you to crouch down and feel around or use a flashlight to locate it. I remember my first attempt to find it under the engine bay took some time as it was in an inconspicuous spot. But once found, I realized these numbers are crucial for verifying the vehicle's legality, such as for registration and insurance. I advise new owners not to rush; take your time to inspect carefully—consider it part of learning car maintenance tips.

Was this review help?
10
3
Share
Expand All
AbelFitz
01/10/2026, 12:37 AM

When helping my family with the transfer procedures for the Great Wall Pao, I had to locate the VIN (Vehicle Identification Number) stamp, which turned out to be quite practical. The VIN stamp is usually engraved in the metal surface, often found in the front-right area after opening the hood or on the body frame near the front passenger seat. In my case, I found it on the door pillar—just wiping it with a damp cloth made the number clearly visible. The slightly hidden design of the VIN location is for anti-theft purposes, but it’s relatively fixed and not too hard to find. By the way, regularly checking the VIN during car maintenance can help prevent issues like license plate cloning. Don’t overlook this detail—it’s quite important for protecting your rights. Paying attention to these small things while driving and developing good habits can make car ownership more worry-free.

Was this review help?
9
0
Share
Expand All
More Forum Discussions

What Causes the Steering Wheel to Lock and Prevent the Car from Starting?

The reason the steering wheel locks and prevents the car from starting is: After the vehicle is turned off, the steering wheel automatically locks as a simple anti-theft feature. When this feature is activated, the car cannot be started. The solution is to insert the key and turn the steering wheel back and forth a few times to unlock it, allowing the car to start. Alternatively, the owner can first press the keyless start button, then wiggle the steering wheel left and right, press the brake, and press the start button to complete the ignition. If the steering wheel remains locked and the engine does not start, there is no hydraulic pressure. If this method fails, the car can be taken to a 4S shop for repair. This design is quite reasonable—as long as the owner knows how to use it, locking the steering wheel before leaving the car in crowded places provides added security.
19
4
Share

What are the reasons for OBD failure?

OBD failure can be attributed to the following reasons: 1. Outdated OBD system; 2. Malfunctioning sensors in the OBD system; 3. Engine failure. OBD is a diagnostic system developed for vehicle fault detection. During vehicle operation, the OBD continuously monitors the vehicle's condition with the assistance of numerous sensors. If a fault occurs during operation, the OBD stores it in the form of a fault code. When the vehicle requires maintenance, simply connecting a diagnostic tool can identify the fault location, facilitating repairs by technicians. By reading vehicle data and checking for engine faults or fault codes, an OBD that fails inspection will not pass the annual inspection.
20
3
Share

What is the fuel consumption of the Haval H2?

The fuel consumption of the Haval H2 is 7L/100km. Items to check if fuel consumption is too high: Regularly replace spark plugs: The function of spark plugs is to generate an electric spark with high voltage to ignite the air-fuel mixture. If damaged, the ignition energy decreases, causing uneven combustion of the mixture, which leads to slower acceleration and increased fuel consumption. Clean carbon deposits: Excessive carbon deposits can roughen the intake pipe walls, affecting the intake efficiency and the quality of the air-fuel mixture, resulting in a significant increase in fuel consumption. It is recommended to clean carbon deposits every six months. Method to accurately calculate fuel consumption: Fill the tank until the pump automatically stops (first click), then reset the odometer to zero. On the second refill, fill until the pump stops again, then divide the amount of fuel added by the mileage shown on the odometer to obtain the fuel consumption.
8
5
Share

How to Test for a Faulty Car Alternator That's Not Generating Electricity?

Steps to test for a car alternator not generating electricity: 1. Set the multimeter knob to DC voltage 30V; 2. Connect the red probe to the alternator's "armature" terminal and the black probe to the casing; 3. Run the engine at medium speed or higher. The standard voltage for a 12V electrical system should be around 14V, while for a 24V system, it should be around 28V; 4. If the measured voltage matches the battery voltage, it indicates the alternator is not generating electricity. Reasons why a car alternator may not generate electricity: 1. Diode breakdown, failing to rectify; 2. Brushes stuck in the brush holder, preventing the alternator from being excited and thus not generating electricity; 3. No power to the rotor's field coil; 4. Phase-to-phase short circuit or grounding in the stator coil; 5. Loose rotor claw poles.
15
3
Share

What to do with ETC after a car is scrapped?

After a car is scrapped, the solution for ETC is: the car owner should bring their ID card, vehicle license, ETC card, and OBU device to the ETC customer service center to handle the removal procedure. Then, with the removal certificate issued by the ETC customer service center, they can go to the contracted bank to cancel the service. ETC, also known as Electronic Toll Collection, is a system that allows vehicles to pass through toll stations without stopping. It uses onboard equipment to identify the vehicle, record information, and automatically deduct the corresponding fee from a pre-bound IC card or bank account. It is an electronic toll collection system used for roads, bridges, and tunnels. With ETC, passing vehicles can be automatically identified and charged without stopping at the toll gate.
16
4
Share

What is the reason for the electronic steering lock failure in the Baojun 560 one-key start system?

Baojun 560 one-key start electronic steering lock failure may be caused by low voltage, the steering column lock not being unlocked, the control key signal not being recognized by the system, the steering column lock failing to unlock, or a steering column malfunction. Precautions for automotive electronic steering: The level of the power steering fluid should not fall below the lower limit marked on the dipstick. If a shortage is detected, the cause should be identified and the fluid should be replenished promptly. If the fluid level is too low, air can easily enter the pipeline. If bubbles appear on the surface of the power steering fluid after replenishment when turning the steering wheel, it indicates the presence of air in the pipeline. If the bubbles do not disappear when turning the steering wheel left or right and the steering remains heavy, the air in the pipeline should be purged. Consequences of electronic steering lock failure: Electronic steering lock failure in the Baojun 560 can cause the car to veer off course during driving, meaning the car will automatically steer to one side even when the steering wheel is kept straight. This may be caused by inaccurate front and rear wheel alignment or inconsistent alignment parameters, or by the left and right steering tie rods being bent, deformed, or having excessive clearance at the hinge.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.