···
Log in / Register

Where is the fog light on the Passat?

3 Answers
VanAustin
07/30/25 1:27am
The fog light of the Passat is located at the light switch below the left side of the steering wheel. There are two gears in total, namely the front fog light and the rear fog light. Pulling one gear is the front fog light, and pulling two gears is both the front and rear fog lights. The following is an introduction to car fog lights: 1. Car fog lights are divided into front fog lights and rear fog lights. The light source has strong penetration and is usually used in situations where visibility is greatly affected by weather such as fog or rain, improving the ability of the driver and oncoming vehicles and pedestrians to detect each other from a distance, playing a role of safety warning. 2. The front fog light is bright yellow and is generally installed below the bumper and at the position closest to the ground on the body to ensure the function of the fog light. If installed too high, the light cannot penetrate the rain and fog to illuminate the ground, rendering it ineffective. 3. The rear fog light has a red light source, and the light lines of the rear fog light symbol are parallel. 4. In situations with low visibility such as fog, snow, rain, or dust, the front and rear fog lights are usually used together to ensure driving safety.
Was this review help?
4
4
Share
VonSamantha
08/15/25 7:08am
I've been driving a Passat for over a decade, and the fog lights are positioned at the very bottom of the front bumper on both sides, close to the ground. This design enhances visibility by allowing the light to penetrate thick fog. When encountering heavy fog while driving, simply turn the light control stalk next to the steering wheel to easily activate the fog lights, ensuring safe driving. Due to their low position, they often get covered in mud or snow, so I make it a habit to regularly inspect and clean them, using a damp cloth to wipe the lens clear of dust to maintain brightness. This is especially crucial for long-distance driving, as fog lights can be lifesavers in severe weather. I recommend familiarizing yourself with their location when you get a new car—just crouch down and check the corners of the bumper to spot them. Simple maintenance can extend their lifespan and keep nighttime driving safe.
Was this review help?
18
2
Share
Expand All
JonathanAnn
10/20/25 7:13am
I noticed the fog lights on my Passat are positioned low on both sides of the front bumper during my commute. Though inconspicuous in placement, they play a crucial role—especially in foggy conditions by directing light straight onto the road surface to reduce glare. Activating them is straightforward: just rotate the dial on the left side of the steering wheel to the fog light icon. As a pragmatist, I'd recommend paying extra attention to them after rain or snow to prevent mud from clogging the lens and diminishing effectiveness. Cleaning is simple—just crouch near the front bumper and wipe a few times. Don’t overlook this spot; keeping it clear helps prevent accidents. Regularly checking their condition during daily drives isn’t burdensome—make it a habit to ensure they’re always ready for sudden weather changes. Remember, the low-position design serves to focus the beam, so never underestimate its utility to avoid risks.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

What are the functions of the Audi Q5L air conditioning buttons?

The functions of the Audi Q5L air conditioning buttons are: 1. The knobs on both sides are for temperature adjustment, and the AUTO button turns on the automatic air conditioning; 2. The fan-shaped button is for adjusting the air volume, and the icon of a person with three dots represents the air distribution mode; 3. The icon of a fan with three wavy lines is the button for defrosting the front windshield, while the rectangle with three wavy lines is for defrosting the rear windshield. Taking the Audi Q5L 2021 40TFSI Fashion Dynamic model as an example: It is a mid-size SUV launched by FAW-Volkswagen Audi, with dimensions of 4770mm in length, 1893mm in width, and 1667mm in height. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 140kw and a maximum torque of 320nm, matched with a 7-speed dual-clutch transmission.
15
3
Share

What are the effects of prolonged exposure to sunlight on a car?

Prolonged exposure to sunlight can have several negative effects on a car: 1. Accelerates the aging of interior materials. Car interiors are typically made of plastic, which can deform and produce unusual noises when exposed to prolonged sunlight. 2. Affects the vehicle's sealing performance. Many parts of a car are made of rubber, which can deteriorate under prolonged sunlight, reducing their sealing effectiveness. 3. Generates harmful gases. When exposed to high temperatures, car interiors can release harmful gases such as formaldehyde. Inhaling excessive amounts of formaldehyde can be hazardous to human health and affect overall well-being.
5
0
Share

Does Replacing the Windshield Count as an Accident Vehicle?

Whether replacing the windshield counts as an accident vehicle depends on the cause of the replacement—whether it was due to an accident or an unexpected incident. If the windshield was replaced due to damage caused by a collision, then the vehicle is considered an accident vehicle. However, if the replacement was due to an unforeseen and unavoidable event, such as a flying stone breaking the glass, then it does not qualify as an accident vehicle. A major taboo when replacing a car's windshield is improper installation. If the windshield is not installed correctly, it may affect the seal of the windshield. Violating this taboo with improper installation can lead to poor adhesion between the adhesive and the glass, resulting in a weak seal, air leaks, noise, and other potential hazards.
6
3
Share

What does the yellow dashed line on the road mean?

Yellow dashed lines are also used to separate lanes of traffic moving in opposite directions, typically marked on narrower road surfaces. Whether it's a single or double yellow line, as long as it's dashed, vehicles are permitted to cross the line for overtaking or making a U-turn, provided it is done safely. Single solid yellow line: Used on roads with fewer central lanes, a single solid yellow line strictly prohibits vehicles from crossing. Therefore, driving on the line, overtaking, or making a U-turn is not allowed. When a yellow solid line is marked on the roadside or curb, it indicates that parking—whether long-term or temporary—is prohibited. Yellow dashed and solid line: Often found near ramps, bridges, or where lanes merge into the main road, this marking allows vehicles on the dashed side to temporarily cross the line for overtaking or turning, while vehicles on the solid side must not cross the line, as doing so would be a traffic violation. Double solid yellow lines: These lines separate lanes of opposite-direction traffic and are usually painted in the center of the road. Double solid yellow lines strictly prohibit vehicles from crossing, meaning driving on the line, overtaking, or making a U-turn is not permitted. Yellow grid lines: These indicate no-stopping zones. The grid-like yellow markings designate areas where parking is prohibited for any reason. Such markings commonly appear near schools, institutions, residential areas, fire lanes, and intersections—places where temporary parking could easily cause congestion—reminding drivers not to stop under any circumstances.
3
5
Share

What does it mean when the EPS light on the car is on?

When the EPS light on the car is on, it indicates a chassis braking technology developed on the basis of the anti-lock braking system (ABS). It mainly consists of a control unit, steering sensor, wheel speed sensor, slip angle sensor, lateral acceleration sensor, and other components. EPS enables automatic vehicle safety control, effectively improving driving stability and safety under dynamic conditions such as braking, acceleration, and steering. The EPS system includes various sensors that comprehensively detect the vehicle's driving state, as well as an intelligent onboard microcomputer control system for analyzing and processing signals from these sensors. The sensors used in the EPS system include the yaw rate sensor, lateral acceleration sensor, steering wheel angle sensor, brake pressure sensor, and throttle position sensor, all of which are essential components of the system.
15
4
Share

What is the tutorial for using the Roewe i5 central control screen?

The tutorial for using the Roewe i5 central control screen is: 1. The vehicle is equipped with USB music and online music, with different shortcut buttons on the left side of the interface for easy switching between different functions; 2. The high-end model of this vehicle is equipped with a panoramic imaging function, which can display real-time road conditions around the vehicle on the central control screen. Taking the 2021 Roewe i5 1.5L Manual Platinum Edition as an example: The manufacturer of this car is SAIC Motor, classified as a compact car, with an energy type of gasoline, a 5-speed manual transmission, a body type of 4-door 5-seater sedan, a maximum speed of 185 km/h, and a naturally aspirated intake form.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.