Where is the fog light on the Chevrolet Malibu XL?

2 Answers
DiCorey
09/08/25 4:33am
The Chevrolet Malibu XL does not have fog lights, so there is no location to turn them on. Below is an introduction to the functions and classification of fog lights: Function of fog lights: The purpose of fog lights is to make the vehicle visible to others in foggy or rainy conditions where visibility is significantly affected by the weather. Therefore, fog lights require a light source with strong penetration. Most vehicles use halogen fog lights, while LED fog lights are a more advanced option. Classification of fog lights: Fog light switches generally have three positions: the 0 position is off, the first position controls the front fog lights, and the second position controls the rear fog lights. When set to the first position, the front fog lights are activated, and when set to the second position, both front and rear fog lights work together.
Was this review help?
3
5
Share
AxelLee
09/20/25 3:16am
As a Malibu XL owner, I can tell you the fog lights are positioned one on each side at the bottom of the front bumper, right below the corners of the car. They're quite visible if you crouch down and look from the front. Their low placement is designed to minimize light reflection, making them particularly useful when turned on during foggy or rainy weather to illuminate nearby roads and prevent headlight glare from affecting visibility. Operation is simple - just press the fog light button on the lighting control stalk next to the steering wheel. I recommend wiping the fog light covers during each car wash to prevent dust buildup from diminishing their effectiveness. If a bulb burns out, you can replace it yourself, but be sure to choose the correct halogen bulb model. Remember to only use them in necessary weather conditions to avoid wasting power. Maintaining them in good condition is crucial for driving safety - if they stop working, promptly check the fuses or visit a repair shop.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

How Many Kilometers Between Each Accord Maintenance?

According to the maintenance manual, the maintenance interval for the Accord is every 5,000 kilometers. Here is an introduction to car maintenance: 1. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 2. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration, and extend the service life. 3. Car maintenance can be divided into minor maintenance and major maintenance.
9
2
Share

Should You Press the Clutch and Brake When Starting the Engine?

When starting the car engine, you should press the clutch and brake. Pressing the clutch makes it easier to start the car, while pressing the brake prevents the car from rolling when in neutral. Here is some related information about pressing the clutch and brake: 1. Pressing the clutch when starting the engine is a good habit. It not only prevents accidents caused by starting the car in gear but also reduces starting resistance, making it easier to start and preventing stalling. 2. Pressing the clutch when starting the engine reduces the load on the starter motor and allows the ignition system to deliver more electrical energy, ensuring a better starting condition for the engine. If you don't press the clutch when starting, it increases the load on the starter motor and causes the battery to output a larger current, which can affect the engine's ignition performance. 3. It's important to develop the good habit of pressing the clutch when starting the engine. If you forget to shift to neutral when turning off the engine or leave the car in gear on a slope to prevent rolling, not pressing the clutch when starting can quickly lead to danger. Additionally, pressing the clutch reduces ignition resistance and engine resistance, thereby prolonging the car's lifespan.
11
5
Share

What engine is equipped in the Soueast DX7?

The engine of the Soueast DX7 is produced by Shenyang Aerospace Mitsubishi and is a domestically manufactured engine. The engine model of the Soueast DX7 is the 4A91-turbo, with a maximum power of 145KW, maximum horsepower of 197, and maximum torque of 285Nm. For daily maintenance of the Soueast DX7 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard being no lower than the manufacturer's specified requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. When the amount is small, it remains suspended in the oil; when the amount is large, it precipitates from the oil, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
13
2
Share

What are the shortcomings of the Eclipse Cross engine?

The issues with the Eclipse Cross engine are: it is equipped with a 1.5-liter turbocharged engine with a maximum output of only 154 horsepower, resulting in insufficient power. Below is an introduction to the Mitsubishi Eclipse Cross: 1. The Mitsubishi Eclipse Cross features a unique and bold exterior design, with a large front grille, open-eye style headlights, a trapezoidal lower air intake, and chrome accents on the front bumper, giving the front end a full and imposing appearance. 2. The Mitsubishi Eclipse Cross is designed with a strong emphasis on aerodynamics, offering very stable and solid steering feel. The suspension is stiffer than the standard version, providing excellent ride comfort on bumpy roads.
11
4
Share

What Causes the Car AC to Not Cool at Idle Speed?

When the car AC fails to cool at idle speed, the first issue we consider is belt slippage. Since the AC compressor is driven by the crankshaft via a belt, when the belt slips, the efficiency of the AC compressor decreases. The most noticeable effect is poor cooling performance when the engine is idling or running at low speeds, with cooling gradually improving only when the accelerator is pressed and the engine speed increases. Additional possible causes: 1. Another reason could be a lack of refrigerant. Car AC systems typically require refrigerant recharge every 2-3 years, and some cars may need it annually. Even with a tightly sealed AC system, refrigerant can still escape, especially if there are minor leaks in the AC lines or condenser. 2. The main causes of belt slippage include a loose, aged, or severely worn belt, or insufficient tension from the tensioner pulley. The solution is straightforward: replace the belt.
10
5
Share

How to Turn Off the Auto Start-Stop Function in the Elantra?

The Elantra's auto start-stop function is enabled by default. To deactivate it, simply press the Auto Start-Stop OFF button, which will turn off the engine auto start-stop feature (the indicator light will illuminate, signaling that the auto start-stop is disabled). Additional Information: 1. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving. When it's time to proceed, the system restarts the engine automatically. 2. In the Elantra, the auto start-stop system incorporates an enhanced motor with idle start-stop capability into the conventional engine. This allows the engine to completely shut down when idle stop conditions are met. Upon the driver's command to resume driving, the idle start-stop motor system responds swiftly, restarting the engine instantly to ensure seamless operation, thereby significantly reducing fuel consumption and exhaust emissions.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.