Where is the fog light of the Baojun 310 located?

3 Answers
LilyMarie
07/25/25 3:46am
The fog light of the Baojun 310 is located below the headlights. The functions of the fog light are: 1. The front fog light is used to improve lighting when the road ahead is unclear and can alert oncoming drivers; 2. The rear fog light helps vehicles behind to spot the car in low visibility conditions. Taking the 2020 Baojun 310 as an example, it is a compact car with body dimensions of 4032mm in length, 1680mm in width, and 1450mm in height, with a wheelbase of 2550mm and a curb weight of 985kg. The 2020 Baojun 310 is equipped with a 1.2L naturally aspirated engine, delivering a maximum horsepower of 80PS, a maximum torque of 112Nm, and a maximum power of 59kW.
Was this review help?
17
1
Share
HazelMarie
08/11/25 12:07pm
I have been driving the Baojun 310 for several years. The fog lights are located at the very bottom of the front bumper, usually tucked into the recessed areas on either side of the license plate, with one small round-shaped light on each side. As an affordable family car, the Baojun 310's fog lights are designed to sit relatively low, which helps the light penetrate fog better during rainy or foggy weather, minimizing glare and improving road illumination. I remember once driving in heavy fog—with just the headlights on, visibility was poor, but as soon as I turned on the fog lights, the road became much clearer, significantly improving safety. The fog lights come in standard yellow or white with moderate brightness. I recommend cleaning the lens during regular car washes to prevent dirt buildup from affecting performance. Some friends like to modify the fog light color, but I believe the factory settings are more reliable—avoid unnecessary changes to prevent violating traffic regulations. Maintaining Baojun's lights is simple; if they stop working, first check the bulbs or fuses—this basic inspection can save on repair costs.
Was this review help?
20
0
Share
Expand All
LondynLynn
09/27/25 3:30am
As a frequent driver of the Baojun 310, I can tell you that the fog lights are located at the bottom of the front bumper, near the wheels. Just crouch down and take a look, and you'll easily spot them. Baojun's fog light design is quite reasonable—their low position helps focus the light on the road, avoiding glare in heavy fog. Turning them on during bad weather definitely improves visibility and safety, but avoid using them unnecessarily on clear days to prevent complaints from others. I make it a habit to regularly check the fog lights, using a damp cloth to clean dust off the covers to ensure good light transmission. If the lights don’t turn on, it might be due to an aging bulb or loose wiring, which can be fixed with simple tools. For maintenance, I recommend an annual check—it saves both money and hassle. Overall, the Baojun 310 is quite durable, and fog light parts are affordable, so major repairs are rarely needed.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What is the remote start tutorial for the Land Rover Range Rover?

First, you need to download the official app and register. After passing the manufacturer's verification, you can follow the function keys on the app to perform a remote start. Aim the key at the vehicle and press the lock button on the key. Within 5 seconds, hold the remote start button on the key for at least 4 seconds, or until the vehicle's turn signals flash. The parking lights will illuminate, and the doors will lock. After entering the vehicle during a remote start session, press the brake pedal and turn the ignition switch to the on position to drive the vehicle.
9
5
Share

How to Adjust the Dome Light Not Turning On When Opening the Door in a Land Rover?

If the interior light of a Land Rover Range Rover does not turn on when opening the door, it means the door control function has been turned off. You need to press the door control switch of the interior light to activate it. Open the driver's side door of the Land Rover Range Rover and step on the brake pedal. Press the one-touch start button of the Land Rover Range Rover to start the engine. The dashboard will light up, indicating that the engine has been started. There is a contact switch on the door. Press the door control switch of the Land Rover Range Rover to activate the interior light door control mode.
3
2
Share

How to Maintain a Land Rover Evoque?

Press the one-touch start ignition, use the function keys on the right side of the steering wheel, which are the 4 directional keys and 1 OK key, to find the vehicle information option on the dashboard. Locate the "Recent Alerts" option and press "OK" to enter. Simultaneously hold down the "Down" button on the right side of the steering wheel and the "i" button at the end of the turn signal lever, maintaining this action for about 10 seconds to complete the reset. Finally, restart the vehicle and check if the reset was successful. If not, repeat the operation.
7
3
Share

How to Engage Reverse Gear in a Kia Manual Transmission?

Locate the R gear on the Kia gear shift lever, which is designated for reverse. Engaging this gear allows the vehicle to move backward. Press down on the brake pedal of the Kia K2, leaving the accelerator pedal untouched for now. Press the Kia K2's one-touch start button to illuminate the dashboard and start the vehicle. Shift the Kia K2's automatic gear lever to the R position to enter reverse mode. Apply the brakes if there are obstacles, and gently press the accelerator if you need to increase speed. Once reversing is complete, depress the clutch, disengage the reverse gear, and release the clutch.
19
5
Share

How to Solve the Problem of Scooter Motor Spinning Freely?

When pressing the electric start button of the scooter, you can only hear the motor spinning freely without starting the vehicle. This may be caused by damage to the motor reduction gear. First, remove the transmission side cover. Check the reduction gear and find that the scooter motor cannot reset, confirming that the motor spinning freely is due to damage to the motor reduction gear. It is found that the reduction gear sleeve is severely worn and may no longer be usable. It is necessary to find the sleeve, reduction gear, and pressure cover according to specifications. Replace the sleeve, reduction gear, and pressure cover, then reassemble the vehicle. This will effectively solve the problem of the scooter motor spinning freely.
6
0
Share

What to Use to Clean Tar on a Car?

If there is rust, remove the rust first. Direct polishing can remove the rust. Choose a good anti-rust and waterproof coating to repair the rusted holes. When performing anti-rust work, it is best to use the same type of paint to prevent different paints from reacting with each other. After repairing the rusted holes on the chassis, apply a plastic sealant to the bottom of the car to prevent rust. To maintain the chassis in winter, perform a thorough chassis cleaning and anti-rust treatment. First, clean the chassis thoroughly.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.