···
Log in / Register

Where is the fog light located on the BMW 3 Series?

4 Answers
LailaRose
09/01/25 2:41am

BMW 3 Series fog lights are located on the left side of the rear of the vehicle. Here is an introduction to automotive fog lights: 1. Fog lights generally refer to automotive fog lights. Automotive fog lights are installed on the front and rear of the vehicle to illuminate the road and provide safety warnings during rainy or foggy weather conditions. 2. Rear fog lights are red signal lights installed at the rear of the vehicle with higher luminous intensity than tail lights, designed to make the vehicle more visible to other road participants in low visibility conditions such as fog, rain, or dust. 3. Fog lights are divided into front fog lights and rear fog lights, with front fog lights typically being bright yellow and rear fog lights being red.

Was this review help?
4
5
Share
JohnFitz
09/13/25 5:37am

As a frequent driver of the BMW 3 Series, I clearly remember that the fog lights are positioned right below the front bumper, with one circular or square-shaped lamp housing on each side. I first noticed them when squatting down to observe during car washing. The low placement is designed to keep the light close to the ground in foggy conditions, reducing upward glare for safer driving. Turning them on is simple—just press the button near the steering wheel. The exact position varies slightly by model year; for example, the 2020 version is recessed deeper, while older models sit slightly more outward. I recommend owners check if the lamp housings are clean before rainy weather, as mud coverage can easily reduce brightness. Whenever I encounter heavy fog on highways, I always use them with the width lights—super practical!

Was this review help?
17
2
Share
Expand All
ValerieAnn
10/27/25 6:24am

From my perspective, experience in vehicle maintenance tells me that the fog lights on the BMW 3 Series are typically mounted along the lower edge of the front bumper, near the area in front of the tires. In actual operation, removing the bumper reveals they are secured there with screws, and their symmetrical left-right placement ensures more uniform light distribution. Activating the fog lights is straightforward—just turn the knob inside the car to illuminate them. Their low position offers the advantage of providing highly penetrating light in poor weather conditions while minimizing glare for other vehicles. Different generations of the 3 Series, such as the F30 or G20, may have slight layout adjustments, but all maintain their placement at the lower front section. Occasionally, fellow drivers report damage from stone impacts, so I recommend regularly wiping off dust and checking wiring connections to prevent oxidation. It's crucial to verify the proper functioning of the lights before setting off on a trip.

Was this review help?
14
3
Share
Expand All
DeBarrett
12/10/25 6:40am

As a new BMW driver, I couldn't find the fog lights right after getting my license. Later, I discovered from the manual that they're located beneath the front bumper - just crouch down and you'll see small lights on both sides. The positioning is quite clever: low enough to illuminate the road without causing glare. With just a button press, they've been incredibly helpful in heavy fog. There might be minor variations across models, but generally they're in that area. Veteran drivers told me their low position makes them prone to getting blocked by dirt, so I always check and clean them with a flashlight before rainy days. After one long-distance drive, I truly appreciate how they boost driving confidence.

Was this review help?
11
2
Share
Expand All
More Forum Discussions

What are the reasons for the Buick Excelle stalling with vibration at idle?

The reasons for the Buick Excelle stalling with vibration at idle are: 1. Vacuum leak in the intake pipe; 2. Dirty throttle body or poor idle control system performance; 3. Unstable fuel pressure. The Buick Excelle is a compact car with body dimensions of: length 4468mm, width 1765mm, height 1469mm, wheelbase 2611mm, and fuel tank capacity of 40 liters. The Buick Excelle is equipped with a 1.3L naturally aspirated engine, with a maximum power of 79kW at 6200rpm, and a maximum torque of 133Nm at 4000rpm.
12
1
Share

How to Open the Small Buckle of the Middle Seat Belt in the Back Seat?

Press the button down to pull out the small plug, and press the other large plug downward to pull it out. Here is some relevant information about seat belts: 1. Introduction to Seat Belts: Seat belts are safety components used in equipment, such as when riding in aircraft or performing high-altitude work and artistic performances, to ensure safety. The main materials are polyester, polypropylene, and nylon. Seat belts do not only refer to the webbing; besides the webbing, seat belts are also assembled with other components. "Seat belts" have become a primary consideration for drivers and passengers and are also one of the most important features of cars. 2. Product Classification of Seat Belts: Pole work seat belts, area restriction seat belts, fall arrest seat belts.
17
5
Share

How Long Can a Car Be Left Unused Without Affecting Its Performance?

Generally, a car should not be left unused for more than 15 days. Here are some common issues that may arise when a car is left stationary for too long: 1. Thickening of Fluids: Over time, the fluids inside the car become increasingly viscous and settle at the bottom of the engine. When restarting the vehicle, it is essential to warm up the engine to allow the fluids to distribute evenly throughout the engine. Failure to do so can lead to excessive engine wear. 2. Battery Drain: The car battery continuously discharges, which can be harmful to the vehicle. Many people have experienced that leaving a car unused for one or two months can result in a drained battery, making it difficult to start the car. In such cases, jump-starting may be the only solution.
8
5
Share

What causes the central locking system of JAC Heyue to only lock but not unlock?

The issue is caused by a malfunction in the vehicle's wiring. Here are the relevant details: 1. Door lock switch: Most central locking switches consist of a master switch and individual switches. The master switch is located on the driver's side door, allowing the driver to lock or unlock all doors; individual switches are installed on other doors for independent control of each door. 2. Door lock actuator: The central locking actuator executes the driver's commands to lock or unlock the doors. Door lock actuators come in three types: electromagnetic, DC motor, and permanent magnet motor. All these mechanisms operate by reversing polarity to perform locking or unlocking actions.
11
1
Share

What brand is the engine of the Jiangling Yuhu 7?

The gasoline version of the Jiangling Yuhu 7 uses Ford's EcoBoost engine. Below are the relevant details: 1. 2.4-liter turbocharged diesel engine: It delivers 140 horsepower and a maximum torque of 375 Nm. This engine achieves its peak torque between 1750 and 2250 rpm and reaches its maximum power at 3600 rpm. It features direct fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. 2. 2.0-liter turbocharged diesel engine: It produces 142 horsepower and a maximum torque of 350 Nm. This engine also incorporates direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. 3. 2.0-liter turbocharged gasoline engine: It generates 205 horsepower and a maximum torque of 325 Nm. The peak torque for this engine is achieved between 1750 and 3500 rpm, with maximum power at 5500 rpm. This engine is equipped with direct fuel injection technology and features an aluminum cylinder head.
5
0
Share

How to Deal with Rust on the Disc Inside the Wheel?

If there is only slight rust on the surface, you can remove it by continuously applying the brakes while driving. Here is some relevant information about the wheel hub: 1. Introduction: The wheel hub is the rotating part of the wheel rim connected by pillars inside the tire, which is the metal component mounted on the axle that supports the tire. It is also called the wheel rim, steel rim, or tire ring. Wheel hubs come in various types based on diameter, width, forming method, and material. 2. Types of Wheel Hubs: The wheel hub is also called the wheel rim. Depending on the characteristics and requirements of different vehicle models, the surface treatment process of the wheel hub can vary, mainly divided into painting and electroplating. For ordinary vehicle models, the wheel hub's appearance is less of a consideration, with good heat dissipation being a basic requirement. The process generally involves painting treatment, which includes spraying and then baking, making it cost-effective with vibrant colors and long-lasting durability. Even when the vehicle is scrapped, the color of the wheel hub remains unchanged.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.