Where is the fog light located on the Audi Q3?

2 Answers
McNolan
08/29/25 2:48am
Audi Q3 fog lights are located near the instrument panel. The following is an introduction to the functions and classification of fog lights: Function of fog lights: The function of fog lights is to make other vehicles see the car in foggy or rainy weather when visibility is greatly affected by the weather. Therefore, the light source of fog lights needs to have strong penetration. Most vehicles use halogen fog lights, and LED fog lights are more advanced than halogen fog lights. Classification of fog lights: The fog light switch is generally divided into three gears. The 0 gear is off, the first gear controls the front fog light, and the second gear controls the rear fog light. When the first gear is turned on, the front fog light works, and when the second gear is turned on, both the front and rear fog lights work together.
Was this review help?
13
5
Share
MartinFitz
09/10/25 7:32am
I've driven several Audi Q3 models, and the fog light positions are quite clear: the front fog lights are located on the lower left and right sides of the front bumper, roughly in the area below the license plate, with a compact and inconspicuous design; the rear fog light is integrated into the taillight cluster, emitting a highly visible red glow when activated. They are operated via the lighting control switch, typically found on the stalk to the left of the steering wheel—just a twist to activate, proving extremely useful in foggy or rainy conditions by enhancing road illumination and reducing hazards. It's good practice to regularly check them, such as giving a quick glance during car washes to ensure they're intact. If they're dusty or obscured, clean them promptly to guarantee functionality when needed. In real-world driving, I've personally experienced the benefits of using fog lights in misty conditions—it feels like having an assistant lighting up the road ahead, helping to avoid many potential accidents.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

Why Does a Manual Transmission Stall at Low Idle Speed?

Stalling at low idle speed during startup is caused by insufficient driving skills or the use of substandard fuel. Below are some common reasons for stalling during startup: 1. Fuel tank: The fuel tank may be empty, or the battery voltage might be too low, preventing the starter motor from functioning or reaching the required starting speed. A faulty idle speed control valve, characterized by immediate stalling if no throttle is applied after starting. Clogged fuel lines. 2. Vehicle faults: Malfunctions in the vehicle's control system, though rare, cannot be ruled out. Blockages in the intake system, possibly due to foreign objects—check the pipeline from the air intake, air filter to the throttle body. 3. Fuel consumption impact: Repeatedly stalling and restarting the engine in a short period can affect fuel consumption. Frequent stalling during startup may shorten the engine's lifespan.
18
3
Share

Which country does Saab belong to?

Saab is a Swedish automobile manufacturer, and its models include: Saab 93, Saab 95, Saab 92X, Saab 94X, Saab 97, etc. Taking the 2014 Saab 93 as an example, it is a mid-size car with body dimensions of: length 4668mm, width 1802mm, height 1473mm, wheelbase of 2675mm, fuel tank capacity of 62L, and curb weight of 1620kg. The 2014 Saab 93 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 220PS, maximum power of 162kW, maximum torque of 350Nm, and is paired with a 6-speed automatic transmission.
19
4
Share

What is the minimum ground clearance of the Passat?

The minimum ground clearance of the Passat is 138mm. The minimum ground clearance reflects the vehicle's ability to pass over obstacles or uneven ground without collision. Taking the 2020 Passat as an example, it belongs to the mid-size car category with body dimensions of 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm and a curb weight of 1470kg. The 2020 Passat features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
16
4
Share

Why do some cars have two exhaust pipes?

Many cars are equipped with turbocharging technology, which makes full use of the energy of exhaust gases to increase the intake air volume and generate greater power for the car. Here are the relevant explanations: 1. Exhaust pipe: As the name suggests, it allows the car to run normally by discharging the exhaust gases produced by the engine, ensuring the engine operates properly. Another function of the exhaust pipe is to reduce noise and pollution. The exhaust pipe on the chassis is curved, and some parts vary in size, which helps to lower noise. 2. Large displacement: If a car has a large displacement but a small exhaust pipe, the exhaust gases cannot be discharged in time, which affects the intake air volume, reduces combustion efficiency, and results in less power generated. In the long run, the car's fuel consumption will also increase, and there is a risk of carbon buildup damaging the engine.
15
4
Share

What is the Auto Stop-Start Function?

The auto stop-start function is an engine auto start-stop feature, which has the following characteristics: 1. The engine can automatically shut off to reduce fuel consumption and emissions; 2. After the engine shuts off, the power supply can replace the pulley to provide operating power for the engine cooling fan and in-car air conditioning. Precautions for using auto start-stop include: 1. Quickly shift to P gear when the engine stops and release the brake; 2. Reduce current consumption; 3. Do not repeatedly press the brake when the engine is off; 4. Wait for the engine speed to drop to zero, engage the starter gear, and then restart; 5. Do not activate the auto start-stop system during low-speed parking or when the air conditioning is on.
3
2
Share

Why do cars have speed limits?

Speed limits are established to ensure both driving safety and the efficient utilization of road resources. Here are the relevant explanations: 1. Rear-end collisions: Increases the likelihood of rear-end collisions. Vehicles speeding often follow other vehicles too closely. When the leading vehicle applies emergency braking, the following vehicle is prone to rear-end collisions due to insufficient distance. 2. Rollover: Increases the risk of rollover. Excessive speed amplifies centrifugal force during turns. Calculations show that tripling the speed increases centrifugal force ninefold. Higher speeds generate greater centrifugal force, making the vehicle more susceptible to rollover if the driver makes abrupt steering corrections.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.