Where is the fog light located on a car?

2 Answers
VonGabriella
09/04/25 8:13am
Car fog lights are located below the headlights, at the lowest part of the bumper closest to the ground. Fog lights are divided into front fog lights and rear fog lights. The fog light activation button is on the light control stalk. Locate the fog light symbol position and rotate the control ring to turn on the fog lights. The fog light switch has three positions: position 0 is off, the first position controls the front fog lights, and the second position controls the rear fog lights. When one position is engaged, the front fog lights work; when two positions are engaged, both front and rear fog lights operate together. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility such as fog or heavy rain, so fog light beams need to have strong penetration capability.
Was this review help?
5
5
Share
VanSebastian
09/17/25 2:16am
From my years of driving experience, I recall that car fog lights are typically positioned low on the front end, such as below the front bumper near the lower corners of the vehicle or at the inner bottom of the headlight assembly. The rear fog light is usually located at the lowest part of the taillight cluster, often with a red lens, either independently illuminated or integrated into the overall design. The reason for placing them so low is to prevent excessive light scattering and reflections back into the driver's eyes during foggy conditions, while directly illuminating the road surface to enhance visibility. Once, on a foggy highway, turning on the fog lights allowed me to clearly see the shoulder and lane markings, helping me navigate safely out of a difficult situation. The control switch is generally found on the lighting stalk near the steering wheel, marked with an icon of a bulb with diagonal lines or an arrow pointing downward. The positioning takes into account airflow and lighting efficiency, avoiding water splash that could dirty the lens and reduce effectiveness. When cleaning, pay extra attention to this area to minimize sand and debris buildup that could damage the light housing.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

How to Reset the Skoda Tire Pressure Warning Light?

Skoda tire pressure warning light reset method: Press and hold the SET button with the tire pressure symbol located at the far right front of the gear lever for an extended period. With the ignition on or in idle state, hold for 3 seconds until the instrument cluster indicator lights up and a beep sounds, indicating initialization is complete. After initialization, the tire pressure monitoring symbol will disappear. When the tire pressure monitoring symbol appears on a Skoda Octavia, the tire pressure must be reset to turn off the warning light. Strictly speaking, tire pressure refers to the air pressure inside the tires. There is a label printed with standard tire pressure values on the rear of the driver's side door - this indicates the pressure when tires are cold (i.e., after parking for at least three hours or driving no more than 1.6km). Tire pressure measurements are most accurate when tires are cold.
18
0
Share

What does the automatic parking of a vehicle mean?

The automatic parking of a vehicle refers to an automatic braking function that allows the driver to avoid unnecessary sliding of the vehicle without the need for prolonged braking when the electronic parking brake is engaged. The working principle of automatic parking: This function is developed from the ESP module. During this process, the ECU computer uses sensors installed on the vehicle to obtain the levelness of the car body and the torque of the wheels, thereby determining whether braking is needed to prevent the car from rolling. The braking force applied to the wheels is not very strong, just enough to prevent the vehicle from moving, so that when the accelerator is pressed again to move forward, there will not be too severe jerking.
8
1
Share

How to Avoid Stalling While Driving

Avoid stalling methods: The clutch pedal must be fully depressed, and during the process of slowly releasing the clutch pedal, feel the body's vibration and movement tendency. When the vehicle has a slight vibration and shows a tendency to move, slowly accelerate, continue to slowly release the clutch pedal until it is completely released, allowing the vehicle to start smoothly. Ways to avoid stalling when starting: 1. Adjust the seat properly after getting in the car, ensuring that the thighs and calves can bend and stretch freely. This is crucial; if you're not seated properly, you won't be able to operate the car well. 2. Depress the clutch: The left foot should fully depress the clutch; otherwise, there will be a grinding sound when shifting gears or difficulty in engaging gears, which can easily damage the transmission gears. 3. Shift gears: Shift into first gear. Many beginners shift gears with excessive force, which is not advisable. It should be done gently, following the path to the corresponding gear.
20
0
Share

Where is the USB port of the Buick GL8?

The USB port of the Buick GL8 is located under the center console. The functions of the USB port include: 1. Playing music from a USB drive; 2. Charging mobile phones; 3. USB car cigarette lighter; 4. Car vacuum cleaner; 5. Electronic dog and dash cam. However, excessive use may lead to excessive load, damaging the battery and generator. The new Buick GL8 business travel vehicle largely retains the design of the second-generation Buick GL8. The most notable change is the front grille, which has been updated from the previous waterfall-style to the new wing-style of the Buick family, adding a sporty touch to the vehicle while maintaining its original business appeal, making it more attractive to a wider range of customers. The Buick GL8 is a popular joint-venture MPV model, with body dimensions of 5256mm in length, 1878mm in width, and 1776mm in height, and a wheelbase of 3088mm.
11
3
Share

Should I shift to P or N gear when idling for a long time without turning off the engine?

When idling for a long time without turning off the engine, you can shift to either P gear or N gear, as long as you ensure the handbrake is tightly engaged. If you're waiting at a red light or stuck in traffic without turning off the engine, it is recommended to shift into N gear. Both N gear and P gear can be used when parking, but there are differences between these two gears. N gear does not have a locking mechanism, whereas P gear does. When shifted into P gear, the locking mechanism can lock the transmission gears, which indirectly locks the wheels. In this case, even without engaging the handbrake, the car will not roll. When shifted into N gear, there is no locking mechanism to secure the transmission gears. If the handbrake is not engaged at this time, the car may roll.
2
0
Share

How to Remove the Roof Lining of the 8th Generation Accord?

Steps to remove the roof lining of the 8th Generation Accord: First, remove the interior trim panels, then detach all the pillar covers, followed by the roof light switch, after which the roof lining can be taken off. The car roof lining is an important component of the vehicle's interior, serving functions such as decoration, sound absorption, and heat insulation. In an era increasingly focused on high performance, environmental friendliness, and lightweight design, the interior roof lining has become a significant factor in car selection, leading to higher demands on automotive interior components. The 2018 Honda Accord measures 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.