Where is the fog light fuse located in the Mazda Axela?

2 Answers
HopeAnn
08/26/25 5:31am
The fog light fuse of the Mazda Axela is located in the fuse box in the front engine compartment. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility such as fog or heavy rain. Therefore, fog light sources need to have strong penetration capability. Most vehicles use halogen fog lights or LED fog lights. The Mazda Axela has a body length of 4662mm, width of 1797mm, height of 1445mm, and a wheelbase of 2726mm. It features front-wheel drive and is equipped with a 1.5L naturally aspirated engine paired with a 6-speed manual transmission. This engine delivers a maximum power of 86kW and a maximum torque of 148Nm.
Was this review help?
17
2
Share
VanArabella
09/08/25 7:44am
I've had my Axela for several years, and the fog light fuse is usually located in the fuse box in the engine compartment. Open the hood, and you'll find a black box on the right side. After opening the cover, all the fuses inside are labeled. Look for the one marked "FR FOG" or something similar, which is the fog light fuse. If you can't find it, there's also a secondary fuse box located below the dashboard on the left side. Remember to turn off the car's power before operating, and use a fuse puller to gently remove and check the fuse. If it's blown, just replace it with one of the same amperage—don't mess around, or you could damage the circuit. It's important to check your fog lights regularly when driving, especially in foggy conditions when visibility is poor and dangerous. Carrying some spare fuses with you is also a good safety measure. Safety first.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

What is the difference in tire sizes?

The differences in tire sizes can be summarized in two main aspects, as detailed below: 1. Distance variation: Larger tires cover more distance with each rotation of the connected drive shaft compared to smaller tires. Conversely, smaller tires cover less distance per rotation. 2. Traction difference: Larger tires have a greater contact area with the road surface, enhancing vehicle traction, while smaller tires have a smaller contact area, resulting in weaker traction. Automobile tires can be categorized into pneumatic tires and solid tires based on their structure. Most modern vehicles use pneumatic tires, which are further divided into high-pressure, low-pressure, and ultra-low-pressure tires based on internal air pressure. Low-pressure tires are commonly used across various vehicle types.
7
2
Share

Can You Still Drive If Engine Oil Gets Into the Spark Plugs?

It is not recommended to continue driving if engine oil enters the spark plugs, as it can lead to difficulties in starting, poor acceleration, increased fuel consumption, and other issues. Immediate inspection and replacement of the spark plugs are necessary. Steps for replacing spark plugs: Open the engine hood, remove the plastic cover of the engine, and detach the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order, and then secure the cover. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug's insulator skirt and electrode should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug will have a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is contaminated with oil or deposits but is otherwise undamaged, it can be cleaned and reused. If the spark plug is severely damaged, showing signs like blistering, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates the wrong heat range was selected or the air-fuel mixture is too rich, causing oil to rise.
13
0
Share

Can Car Wheels Be Modified at Will?

Car wheels cannot be modified. The following are the details regarding vehicle modifications: 1. To perform any modifications to a motor vehicle, they must be conducted within the scope permitted by the traffic management department, such as modifications to the body color, engine, fuel type, or chassis number. 2. No individual or organization is allowed to assemble motor vehicles or alter the registered structure, construction, or features of a motor vehicle without authorization. 3. Unauthorized modifications to the vehicle's chassis, engine, suspension, transmission system, steering system, wheel rims, lights, body color painting, and external structure, as well as any alterations to the vehicle's technical data that do not match the data announced by the competent department of motor vehicle products under the State Council, are considered illegal modifications.
17
5
Share

How to reset the wrench light on Bestune X40?

Bestune X40 can manually reset the maintenance reminder using the buttons on the right side of the instrument panel. Here are the detailed steps: 1. Turn off the ignition switch. 2. Press and hold both arrow buttons simultaneously, then turn on the ignition switch. 3. After about 3 seconds with the ignition on, release both arrow buttons. 4. The maintenance menu will appear on the display, asking if you want to reset the maintenance reminder. 5. Press and hold the SET (reset) button for more than 3 seconds. 6. Press the MODE button. 7. Turn off the ignition switch and restart the vehicle to complete the maintenance light reset.
7
1
Share

Should a Bulging Tire Be Replaced or Repaired?

Tire bulging requires replacement, and the causes of tire bulging are as follows: 1. Excessive tire pressure can easily lead to blowouts and is more likely to cause bulging, while low pressure can result in direct impact between the rim and the ground, also causing bulging. Therefore, it is essential to drive at the appropriate tire pressure. Car owners can visit a shop to adjust the tire pressure or purchase a pressure gauge. 2. Poor road conditions can cause bulging. Driving on uneven roads accelerates tire wear, and frequent impacts with obstacles can easily lead to tire bulging. Therefore, try to avoid poor road conditions while driving. If unavoidable, reducing speed can help mitigate the issue.
15
0
Share

What Causes High-Speed Vehicle Body Vibration?

High-speed vehicle body vibration can be attributed to the following 5 causes: 1. Incorrect front wheel alignment angles, excessive toe-in. 2. Low front tire pressure or tire imbalance caused by repairs or other factors. 3. Deformed front wheel rims or incorrect number of tire bolts. 4. Loose installation of transmission system components, bent drive shaft, power imbalance, or deformed front axle. 5. Failed shock absorbers or inconsistent stiffness of front leaf springs. When vibration occurs at higher speeds and causes steering wheel shake, you can first lift the drive axle and place safety blocks under the front wheels. Start the engine and gradually shift into higher gears.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.