Where is the fog light fuse for the Mercedes S350?

Why does fuel consumption increase after changing transmission oil?

An increase in fuel consumption after changing transmission oil is similar to the break-in period of a new car. The transmission needs an adaptation period after the oil change, and temporary higher fuel consumption during this phase is normal. The transmission is a crucial component in vehicles, responsible for gear shifting, torque conversion, enabling reverse movement, and allowing the car to remain stationary at idle. Transmission oil serves to maintain the cleanliness of the transmission system, ensuring proper operation and extending the service life of transmission components. Depending on their structures, transmission oils can be categorized into manual transmission fluid and automatic transmission fluid.

20

1

Share

What to Do If You Fail the Vision Test for Driver's License Renewal Physical Examination?

If you fail the vision test for driver's license renewal, you need to correct your vision. Here are the solutions for failing the vision test during driver's license renewal physical examination: 1. Large vehicles: For applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tramcars, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart; 2. Other vehicle types: For applying for other vehicle types, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart; 3. Small cars: If you have monocular vision impairment, with the naked or corrected vision of the right eye reaching 5.0 or above on the logarithmic visual acuity chart and a horizontal field of vision reaching 150 degrees, you can apply for a driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, or special small automatic transmission passenger cars for the disabled.

11

2

Share

What are the reasons for the heavy steering wheel of a new Buick Excelle?

New Buick Excelle steering wheel heavy reasons and solutions are as follows: 1. There is a problem with the power steering system. Buick Excelle commonly has two types of power steering systems: hydraulic steering and electric steering. For vehicles with hydraulic steering, it is necessary to check whether the power steering pump belt is normal, whether the power steering fluid level is normal, and whether there is any deterioration. If the power steering fluid is insufficient, it can be added. If the power steering fluid has deteriorated, the power steering fluid needs to be replaced. If there are no issues with these, the power steering pump may be faulty and needs to be replaced. For vehicles with electric steering, it is necessary to check whether the electric steering plug connection is normal and whether the power supply is normal. If there are no issues, the electric steering gear may be faulty. The steering system is actually quite complex, especially the electro-hydraulic power steering system, which incorporates many electronic sensors that can adjust the oil pressure of the power steering pump based on the vehicle speed, making it lighter and more stable at low speeds. Sensor malfunctions can cause the steering to become too heavy, and these issues require detection equipment for inspection and repair. 2. Severe deformation of chassis components leading to mechanical damage to the steering mechanism. In this case, the vehicle needs to be towed to a 4S shop or repair shop for inspection and repair. Insufficient tire pressure can make the driver feel that the steering wheel has become significantly heavier, and it can return to normal once the tire pressure is replenished to the standard level. If the car's steering wheel assistance becomes heavy, the steering system should be thoroughly inspected using instruments.

5

1

Share

How to Replace the Isuzu Diesel Fuel Filter?

Diesel fuel filter replacement steps: 1. First disconnect the plug on the water level sensor to prevent wire harness twisting and knotting during disassembly. 2. Loosen the drain valve to release water and oil inside the filter. After draining water, use a container (>2L) to collect fuel from the filter for recycling. 3. Attach the removal wrench, aligning the wrench groove with the lower cover rib before installation. 4. Loosen and remove the lower cover counterclockwise; the filter element will come out with the cover, then pull the filter element out from the lower cover. 5. Remove the plastic seal from the new filter element, apply lubricant (recommended: #46 hydraulic oil) to both top and bottom O-rings for easier assembly. Avoid directly gripping the filter paper to prevent contamination or damage. 6. Replace the O-ring on the lower cover (included with filter element), ensure proper positioning, and lubricate the O-ring. 7. Center and pre-press the filter element into the lower cover until the bottom O-ring enters the cover's groove. 8. Insert the filter element upward into the filter canister until threads engage. Hand-tighten clockwise for 2-3 turns, then use the wrench to tighten (recommended torque: 30-35N.m). 9. Tighten the drain valve and water level sensor clockwise (recommended torque: 3-5N.m), then reconnect the water level sensor plug. 10. Loosen the air vent screw counterclockwise, press the hand pump until continuous oil flow appears at the vent, then tighten the screw clockwise (recommended torque: 1-2N.m). Start the engine and check for leaks.

2

Share

What is the function of the Volkswagen Lavida 126 relay?

When the starter motor operates, it requires a large current. The key is used to control the starter motor. If the key is connected and a large current flows from the key to the starter, the key must be made large and bulky to withstand frequent high current without burning out. Additionally, thick wires would be needed to connect the battery, key, and starter motor, which is not cost-effective, unreliable, and inconvenient for maintenance. Here is additional information: Automotive relay: When the key is turned off, the pull-in coil inside the starter relay loses power, the magnetic force disappears, and the starter circuit contacts open under the action of a spring, cutting off the current to the starter motor, which then stops working. The starter relay is built to be robust, allowing frequent high current passage, thereby improving circuit reliability. Consistent with the general function of relays, relays in the electrical automation industry act as "switches," serving as the intermediate link that controls the opening and closing of one circuit to control the next. Automotive relays typically use electromagnetic or solid-state designs.

2

5

Share

What is the name of Porsche blue?

Porsche blue is called Miami Blue, Sapphire Blue, Ice Blue, etc. Porsche offers customized body paint. Porsche is an automobile manufacturer from Stuttgart, Germany, producing a range of sports cars and luxury SUVs. The Panamera is a large car under the Porsche brand. Taking the 2021 Panamera 2.9T as an example, it features a 5-door, 4-seat hatchback structure with a trunk capacity ranging from 495 to 1334 liters. In terms of power, the 2021 Panamera 2.9T is equipped with a 2.9L V6 twin-turbocharged engine, constructed with an aluminum alloy block, delivering a maximum power of 243 kW and a maximum torque of 450 Nm, paired with an 8-speed dual-clutch transmission.

4

5

Share

Where is the fog light fuse for the Mercedes S350?

Why does fuel consumption increase after changing transmission oil?

What to Do If You Fail the Vision Test for Driver's License Renewal Physical Examination?

What are the reasons for the heavy steering wheel of a new Buick Excelle?

How to Replace the Isuzu Diesel Fuel Filter?

What is the function of the Volkswagen Lavida 126 relay?

What is the name of Porsche blue?

Does using 92 octane gasoline affect the Sagitar?

Does Honda's ECON Mode Damage the Car?

What are the three modes of Roewe battery?

Why does the car air conditioner have a sour smell?