Where is the flasher located in the Wuling Hongguang?

Can You Make a U-Turn on a Single Dashed Line?

You can make a U-turn on a single dashed line if there is no 'No U-turn' sign and it does not affect the normal flow of traffic. However, making a U-turn on a single solid line is not allowed and constitutes a traffic violation. According to the 'Road Traffic Safety Law,' violators will be fined 200 yuan and receive 3 penalty points. On long roads, there are usually white or yellow solid or dashed lines in the middle section or before intersections. U-turns are prohibited on any solid line. Cases where U-turns are allowed: Intersections with U-turn signs allow U-turns: If there is a clear U-turn sign at an intersection, you can make a U-turn. If there is a U-turn traffic light, follow its instructions. If there is no traffic light, make a U-turn only if it does not interfere with other vehicles or pedestrians. Intersections without explicit 'No U-turn' or 'No Left Turn' signs allow U-turns: If there is no explicit prohibition, you can make a U-turn. 'No explicit prohibition' means the intersection has no 'No U-turn' or 'No Left Turn' signs and no solid lines in the center. In such cases, you can safely make a U-turn. Yellow grid lines also allow U-turns: Yellow grid lines are no-parking zones marked at intersections prone to congestion due to temporary stops, important entrances, or other designated areas. Parking (including waiting at traffic lights) on these lines is a violation. Although stopping is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier. Yellow grid lines without barriers are equivalent to 'U-turn permitted.' Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn light, you can only make a U-turn when it is green. When 'No Left Turn' and 'U-turn Permitted' signs coexist: U-turns are allowed, but left turns are prohibited. Note that 'No U-turn' is not the same as 'No Left Turn.' Things to note when making a U-turn at an intersection: Check road markings—if they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If there is a 'No Left Turn' sign, even without a 'No U-turn' sign, U-turns are not allowed at that intersection because U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, you cannot make a U-turn at that intersection. Always yield to oncoming traffic when making a U-turn. If you interfere with straight-moving vehicles, you will bear full responsibility for any accidents. Near intersection stop lines, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow—some have straight arrows. Even without explicit 'No U-turn' signs, U-turns are not allowed in such lanes. Making a U-turn on a crosswalk is also a traffic violation.

14

4

Share

Is running a red light captured from the rear or the front?

Running a red light is captured from the rear. Three photos are taken by an electronic camera to determine the violation: the first photo shows the vehicle crossing the stop line at the intersection, including the red light signal and license plate number; the second photo shows the vehicle completely crossing the stop line, including the red light signal and license plate number; the third photo shows the vehicle continuing to move, mainly by comparing the change in the vehicle's position from the second photo, including the red light signal and license plate number. Capturing these three photos confirms the vehicle ran a red light. According to the "Road Traffic Safety Law," running a red light is clearly defined. Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and driving through an intersection during a red light constitutes the traffic violation of running a red light. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: There are two types of traffic lights: arrow lights and circular lights. When an arrow light is present, check the arrow light first and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are allowed; when encountering an arrow red light for right turns, right turns are prohibited, or it will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed through the intersection; wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, use it to judge; if there is no countdown, and the vehicle is close to the intersection with high speed, it may proceed to avoid running a red light due to late braking. If the speed is slow and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to pass, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians should follow the motor vehicle signals. When the red light is on, right-turning vehicles may pass if they do not obstruct other vehicles or pedestrians. Running a red light is not considered a violation under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the act as running a red light. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is very low, and even electronic police cannot clearly see the traffic lights, the evidence photos may be blurry. In such cases, mistakenly running a red light will not be penalized. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may occur. After delivering the patient, provide proof from the hospital or the person assisted to the traffic police for verification. If confirmed, the violation records can be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at major intersections. Drivers should follow the traffic police's gestures. The traffic police department states that according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," vehicles that have already crossed the stop line when the yellow light flashes may continue to pass. If the yellow light is already on and the vehicle continues to rush through, it will be considered running a red light if captured.

9

5

Share

What is the original tire brand of the Mercedes-Benz GLA200?

Mercedes-Benz GLA tires are from the Bridgestone brand. The Mercedes-Benz GLA uses tires with the size 235/45/R19. Introduction to Bridgestone: Bridgestone is a globally renowned tire manufacturer with 51 factories in 23 countries and sales in over 150 countries. The company was founded by Shojiro Ishibashi. The company's English name is derived from the founder's surname, Ishibashi, translated literally. Bridgestone's corporate philosophy: To provide people with safe and comfortable lives, create joy and excitement, and strive to be a trusted, beloved, and proud enterprise—this is the corporate philosophy of the Bridgestone Group.

5

Share

Can a 4AT Transmission Be Upgraded to 6AT?

4AT transmission can theoretically be upgraded to 6AT. Here is a detailed introduction about automotive transmissions: 1. Overview: A transmission is a device that changes the speed ratio and direction of motion, usually located between the clutch and the central drive. It can alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gears. 2. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were primarily 4AT. AT transmissions use an electronically controlled automatic operating system to achieve automatic shifting. CVT is a true continuously variable transmission with fewer parts and a compact size. DCT has two clutches.

13

2

Share

Why does the car jerk when starting?

The car jerks when starting due to a damaged solenoid valve. Related introduction: 1. Introduction: The solenoid valve (Electromagnetic-valve) is an industrial device controlled by electromagnetism, serving as a fundamental automation component for fluid control. It functions as an actuator and is not limited to hydraulic or pneumatic systems. In industrial control systems, it adjusts the direction, flow rate, speed, and other parameters of the medium. 2. Expansion: Solenoid valves can be paired with different circuits to achieve the desired control, ensuring both precision and flexibility. There are various types of solenoid valves, each playing a role in different parts of the control system. The most commonly used types include check valves, safety valves, directional control valves, and speed regulating valves.

2

3

Share

What is the difference between 98H and 98V tires?

Tire markings 98 represent the load index of the tire, while V denotes the speed rating of the tire; H represents the speed grade of the tire. Below are the relevant explanations: 1. Specific meaning of 98V: The 98 on the tire represents the load index, indicating that the tire can bear a maximum weight of 750KG, and V represents the speed rating of the tire, which is the maximum speed limit. A tire marked with V can reach a maximum speed of 240 km/h. 2. Specific meaning of 98H: 98 represents the load index of the tire, corresponding to a maximum load capacity of 750KG. H represents the speed grade of the tire, indicating the maximum speed at which the tire can carry the specified load under specified conditions, with H's maximum speed being 210 km/h.

12

5

Share

Where is the flasher located in the Wuling Hongguang?

Can You Make a U-Turn on a Single Dashed Line?

Is running a red light captured from the rear or the front?

What is the original tire brand of the Mercedes-Benz GLA200?

Can a 4AT Transmission Be Upgraded to 6AT?

Why does the car jerk when starting?

What is the difference between 98H and 98V tires?

How Fine a Tube Can Pass Through the Fuel Tank Anti-Theft Screen?

Which car model is the Buick sgm7103lba1?

What is the ground clearance of the 2021 BMW X1?

Is the Subject 1 Driving Test Conducted on a Computer?