Where is the Fit's Cabin Air Filter Located?

2 Answers
SanTaylor
07/28/25 8:09pm
The cabin air filter of the Honda Fit is located inside the blower behind the glove compartment on the passenger side. To replace the filter, you need to remove the glove compartment and then open the cabin air filter cover. The cabin air filter is a crucial component of the air conditioning system and requires regular replacement. Generally, it should be replaced every 10,000 kilometers. Here are some relevant details about the cabin air filter: 1. The cabin air filter is an essential part of the car's air conditioning system and needs to be replaced periodically. Most vehicles require replacement every 10,000 kilometers. 2. If the cabin air filter is not replaced for a long time, it can affect the efficiency of the air conditioning system and may cause unpleasant odors when the AC is turned on. 3. If you live in an area with poor air quality, you can purchase a cabin air filter that can filter PM2.5 particles. 4. When purchasing a cabin air filter, always choose products from reputable brands and avoid cheap, low-quality filters. 5. The air conditioning system also requires regular cleaning and disinfection. Otherwise, bacteria can accumulate inside the system, posing health risks to the vehicle's occupants.
Was this review help?
20
5
Share
PaigeLee
08/12/25 12:59am
I've been driving a Fit for over eight years, so I'm quite familiar with the location of the cabin air filter. It's usually located behind the glove box on the passenger side, to be more specific, inside or towards the inner area of the glove compartment. The Fit is designed quite user-friendly, and you can easily find it without any complicated tools: just open the glove box door, press the fixing points on both sides to fully release or remove the inner storage compartment cover, and the filter is hidden behind a small plastic door there. Regularly replacing the filter is crucial. I make it a habit to check it every 15,000 kilometers or every six months because a dirty filter can develop mold and odors, affecting the air conditioning's airflow efficiency. The location isn't particularly hard to find, but first-timers might spend a few minutes figuring it out. I recommend checking the owner's manual or looking up a tutorial video online—doing it yourself takes just a few minutes and saves you the cost of a repair shop visit. The Fit's air conditioning system relies on this filter to trap dust and pollen, especially in urban areas with poor air quality. Frequent replacements help maintain a comfortable breathing environment inside the car.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What brand of antifreeze does the Audi Q5 use?

Audi Q5 uses G13 antifreeze. Antifreeze is a coolant containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, boiling in summer, and preventing scale and corrosion throughout the year. Composition of antifreeze: The main components of antifreeze are: 50% pure water, 40% methanol, and 10% other substances. Types of antifreeze: Antifreeze is generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. Can antifreeze be mixed: The same brand of antifreeze must be used. Different brands of antifreeze may have different production formulas. If mixed, various additives may undergo chemical reactions, causing the additives to fail. How to choose antifreeze: The basic indicators of antifreeze are freezing point and boiling point. The market offers antifreeze with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose one that is at least 10°C lower than the lowest temperature in your region.
19
2
Share

Where is the longitudinal acceleration sensor located?

Longitudinal acceleration sensors generally do not have a fixed position. In most vehicle models, they are installed at the front of the vehicle's center of gravity. Of course, a vehicle may have multiple longitudinal acceleration sensors, such as on the wheels and B-pillars. Their function is to detect the phenomenon of the vehicle lifting or nodding during acceleration or braking deceleration, in order to control the adjustment of the front and rear axle ADS damping force, thereby providing optimal ride comfort. Additional information: 1. When the sensing element moves with acceleration a, the mass block is subjected to an inertial force opposite to the direction of acceleration, causing deformation proportional to the acceleration a, which in turn causes stress and strain in the cantilever beam. This deformation is detected by the diffused resistor attached to the cantilever beam. According to the piezoresistive effect of silicon, the resistance of the diffused resistor changes proportionally to the strain. Using this resistor as one arm of a bridge, the measurement of acceleration can be completed by measuring the change in the bridge's output voltage. 2. Principle of acceleration sensor: The sensitive element converts the acceleration signal at the measurement point into a corresponding electrical signal, which enters the preamplifier circuit. The signal is then processed by a signal conditioning circuit to improve the signal-to-noise ratio, followed by analog-to-digital conversion to obtain a digital signal. Finally, the signal is sent to a computer for data storage and display.
6
2
Share

What is the difference between the Buick Landmaster and GL8?

The difference between the Buick Landmaster and GL8 lies in their dimensions: the Buick Landmaster measures 5219mm in length, 1878mm in width, and 1805mm in height, with a wheelbase of 3088mm; the GL8 measures 5238mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. Taking the Buick GL8 2021 ES Landmaster 653T Comfort model as an example: it is a 5-door, 7-seat MPV under SAIC-GM Buick, featuring a front MacPherson independent suspension, a rear multi-link independent suspension, front-wheel drive, and an automatic manual transmission.
5
0
Share

What are the differences between Class A, B, and C motorhomes?

Motorhomes are categorized into Class A, B, and C, which denote their different levels and grades. Among these, Class A motorhomes are the most luxurious and comfortable of the three types, while Class B motorhomes are the smallest in size. Class C motorhomes offer the highest overall versatility among the three. Below is an introduction to the differences between Class A, B, and C motorhomes: 1. Class A motorhomes are the most luxurious and comfortable, as well as the largest among the three types. They are typically built on heavy-duty chassis frames, such as those of large trucks or buses, making them suitable for long-distance travel. These motorhomes feature spacious interiors and are fully equipped with almost all the essentials for RV travel, offering a variety of lifestyle options and a strong sense of being at home. 2. Among Class A, B, and C motorhomes, Class B motorhomes are the smallest in size. Thanks to their compact and flexible design, they are the most suitable for on-road driving, even on rough terrains, where they often perform the most satisfactorily. The biggest advantage of Class B motorhomes is their small size and high maneuverability. 3. Class C motorhomes are usually constructed by combining a van chassis with an additional body shell. Some models feature a bed above the cab, known as a cab-over design, which is also a type of Class C motorhome. Unlike the extreme luxury of Class A motorhomes, Class C motorhomes still provide various comfortable designs at a more affordable price. Class C motorhomes strike a balance between Class A and Class B, offering a relatively slender profile for flexible mobility without compromising on comfort. Compared to Class B, Class C motorhomes provide more spacious and comfortable interiors, equipped with features like a refrigerator, dining area, oven, and larger storage spaces, making them feel more like home. Due to their comprehensive features and economical pricing, Class C motorhomes have become the preferred choice for most family-oriented RV users.
8
0
Share

How many liters of antifreeze does the Baojun 730 need?

Baojun 730 requires 4.7 liters of antifreeze. Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion throughout the year. How to replace antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way hose. Antifreeze flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of antifreeze in this section, replace the hose or resecure the connection as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add water to the antifreeze reservoir and continue to pour water into the reservoir so that it flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will have a faint pink color. Continue adding water until the outflow is clean. Remember to remove the heater hose and drain the water from the heater core. Approximately one hour after draining, add new antifreeze through the radiator hose. Then, add another bottle of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is expelled from the cooling system. Add more antifreeze until the level reaches the "MAX" mark on the reservoir.
11
4
Share

What is the difference between Audi A6 and A6L?

The differences between Audi A6 and A6L are: 1. Different dimensions: The length, width, and height of the Audi A6 are 4951mm, 1886mm, and 1483mm respectively, with a wheelbase of 2925mm; the length, width, and height of the Audi A6L are 5038mm, 1886mm, and 1475mm respectively, with a wheelbase of 3024mm. 2. Different body structures: The Audi A6 is a 5-door, 5-seat station wagon; the Audi A6L is a 4-door, 5-seat sedan. Taking the Audi A6L 2021 45TFSI Premium Elegance model as an example: it is a mid-to-large-sized car under FAW-Volkswagen Audi, featuring a five-link independent suspension for both front and rear suspensions, and a front-engine, front-wheel-drive layout.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.