Where is the first aid kit placed in the car?

What Causes Water in the Air Filter?

Water in the air filter indicates the possibility of water entering the engine. This situation may lead to hydro-lock in the engine. The first step is to turn off the engine, open the air filter housing, clean out the water (check if there is water in the cylinders), and then take the vehicle to a professional repair shop for a basic cleanup. Afterward, replace the water-soaked air filter. Engine Oil and Oil Filter: Engine Oil and Oil Filter: Primarily involves maintenance of the lubrication system. The main function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. Air Filter: The role of the air filter is to filter the air before it enters the cylinders, removing impurities, dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The gasoline filter generally needs to be replaced after driving 20,000-25,000 kilometers.

14

2

Share

Can a motorcycle undergo a late annual inspection after missing the deadline?

Vehicle inspection can be conducted after missing the deadline, but penalties will apply. If a motor vehicle fails to undergo the required safety technical inspection within the specified period, a fine will be imposed and 3 demerit points will be deducted. Overview: If the inspection is overdue by less than 3 months, you can simply go to complete the inspection, usually receiving only a verbal warning. If overdue by more than 3 months but less than 2 years, a certain fine will generally be imposed. If overdue by more than 2 years, the vehicle's registration will be directly canceled. To reinstate the registration, you will typically need to pay the fine. Once the inspection is overdue, the vehicle owner will be fully liable for any accidents. Additional Information: Documents required for the annual vehicle inspection (for individuals) mainly include the original vehicle license, road and bridge card, copy of compulsory traffic insurance, road and bridge ticket, copy of the owner's ID card, and the vehicle itself.

2

4

Share

Can the clutch be released when stopping at a fixed point on a slope?

When stopping at a fixed point on a slope, it is best not to release the clutch. When going uphill, the clutch should be in a semi-engaged state: Then stabilize the clutch and the steering (the right wheel must not cross the rightmost yellow line on the right side). When reaching the stopping point, press the clutch and brake simultaneously (the interval between pressing the clutch and brake should not exceed 2 seconds). When stopping at a fixed point: It is not recommended to maintain a semi-engaged clutch while pressing the brake. If the degree of semi-engagement is not well controlled, pressing the brake can easily cause the engine to stall. This is because beginners tend to unconsciously release the clutch with their left foot when pressing the brake hard with their right foot. It is better to press both the clutch and brake together and apply force simultaneously.

9

2

Share

What are the techniques for stopping a manual transmission car at traffic lights?

The techniques for stopping a manual transmission car at traffic lights are as follows: If the speed is above 30km/h, release the throttle to let the engine slow down the vehicle. When the speed drops below 30km/h, press the clutch and use the brake to smoothly reduce the speed. Below is an introduction to manual transmission: 1. Composition: By switching different gear sets, gear changes are achieved. As the key component for distributing power, the transmission must have two major parts: the power input shaft and the output shaft. Along with the gears that make up the transmission, these form the most basic components of a manual transmission. 2. Principle: The power input shaft is connected to the clutch, and the power transmitted from the clutch is directly passed to the gear set through the input shaft. The gear set consists of gears with different diameters, and different gear ratios achieve completely different power transmission effects. The gear shifting during normal driving refers to changing the gear ratio.

14

1

Share

Do motorcycle decals need to be reported?

Whether a motorcycle's color change through wrapping film needs to be reported depends on the proportion of the film applied. If the area of the color change does not exceed 30% of the vehicle's body, it does not require registration for modification. If the color change area exceeds 30%, it must be reported to the vehicle management office. Applying transparent film does not require reporting. Overview: The applicant should bring the original and photocopy of the identity document of the vehicle owner, the vehicle registration certificate, the vehicle license, and other required documents to the vehicle management office to fill out the "Motor Vehicle Modification Registration Application Form." Additional Information: After submitting the application, if it complies with the regulations, the applicant can receive the "Approval for Modification Notice," allowing the vehicle's color to be changed. It is important to note that the body color and patterns must not imitate special vehicles such as police cars or fire trucks, and the body color must not exceed three types.

8

4

Share

Which manufacturer produces Junle tires?

Junle tires are produced by Weihai Junle Tire Co., Ltd. Introduction to Weihai Junle Tire Co., Ltd.: 1. Basic company information: Weihai Junle Tire Co., Ltd. is a professional manufacturer engaged in the research, development, production, and sales of all-steel radial tires. The company was established in August 2010 with a registered capital of 150 million yuan, located in Weihai, a city known as one of the most suitable places for human habitation. 2. Company's strategic objectives: To create an upgraded version of the domestic tire industry, follow a path of sustainable development, manufacture high-quality tires, highlight the advantages of cost-effectiveness and service, build a century-old national tire enterprise, and create a world-renowned brand. 3. Company's development strategy: Seize the strategic opportunity period of the transformation of the domestic all-steel radial tire consumer market, rationally analyze the changes and trends in the international tire market, stand on the shoulders of giants, broaden development horizons, leverage external resources, utilize its own advantages, innovate development ideas and models, build a strong domestic tire enterprise, and participate in international tire competition.

1

3

Share

Where is the first aid kit placed in the car?

What Causes Water in the Air Filter?

Can a motorcycle undergo a late annual inspection after missing the deadline?

Can the clutch be released when stopping at a fixed point on a slope?

What are the techniques for stopping a manual transmission car at traffic lights?

Do motorcycle decals need to be reported?

Which manufacturer produces Junle tires?

What is the reason for the lack of pressure in the motorcycle foot pedal?

How long does it take to fully charge the BYD Tang using a socket?

Can a motorcycle start if the spark plug is broken?

Is it normal for a motorcycle not to start after getting wet?