Where is the first aid kit in the Sagitar?

1 Answers
RoseAnn
07/30/25 3:30am
The Sagitar is not equipped with a first aid kit, as most only high-end luxury models come with this feature. A car first aid kit is primarily used for wound dressing, stopping bleeding, disinfection, and immobilization before the ambulance arrives in the event of a traffic accident. The Sagitar is a vehicle under FAW-Volkswagen, with body dimensions of 4655mm in length, 1780mm in width, and 1453mm in height, and a wheelbase of 2651mm. The Sagitar uses three different tire sizes: 205/60r16, 205/55r17, and 225/45r18. Higher trim models require larger-sized wheels, hence they use larger-sized tires. Tires are the only components of a car that come into contact with the ground, and they are crucial for the vehicle's driving stability and safety.
Was this review help?
13
5
Share
More Forum Discussions

Should autohold be kept on all the time?

autohold is an automatic parking function, whether to keep it on all the time depends on the driver's needs for this function. During normal use, the advantage of autohold is that it can automatically activate the four-wheel braking system when the vehicle is stopped at a traffic light or on a slope. Even in D gear or N gear, there is no need to keep the foot on the brake or use the handbrake, as the car remains stationary. autohold provides accurate parking force through a slope sensor controlled by the controller. When starting the car, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. It automatically releases the parking brake when the driving force exceeds the driving resistance, allowing the car to start smoothly and significantly reducing the time wasted on judgment based on experience.
15
2
Share

What are the causes of brake light failure?

Brake light failure can be caused by: 1. Brake system failure due to severe oil shortage caused by worn brake fluid pipes; 2. Low oil level in the brake fluid reservoir leading to failure of the float-type sensor; 3. Severe wear of brake pads and breakage of pre-embedded wires; 4. Short circuit in the brake warning system and vapor generation in the brake fluid pipes. The brake system is a series of specialized devices that can forcibly reduce the speed of a vehicle. The brake system mainly consists of four parts: energy supply device, control device, transmission device, and brake. The main functions of the brake system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a stationary vehicle from moving.
8
0
Share

What does autohold mean in a car? How to use it?

autohold refers to the automatic parking system. Press this button when braking, and it can also prevent the car from rolling back on slopes. The following are the functions of autohold and how the automatic parking system works: Functions of autohold: Autohold is essentially an automatic braking function. When autohold is activated, there is no need to pull the handbrake, which enhances driving safety. How the automatic parking system works: The brake management system controls the four-wheel brakes through the extended function of the electronic parking brake (EPB). In other words, the automatic parking system is an extended function of the electronic parking brake (EPB), controlled by the ESP component.
18
3
Share

How to Determine if the PCV Valve is Faulty?

Methods to determine if the PCV valve is faulty: Insert the oil dipstick into the hole below the PCV valve, ensuring it reaches the bottom, then pull it out to check if it is coated with oil. Generally, the presence of oil indicates a malfunction. The PCV valve, also known as the oil separator or pressure control valve, is typically installed between the compressor outlet and the condenser inlet. Its separation function helps improve heat transfer efficiency in the condenser and evaporator. If the PCV valve fails, it should be repaired immediately at a 4S shop or a professional and reliable repair facility. Ignoring the issue can lead to increased fuel consumption, wasted gasoline, and a decline in the vehicle's driving performance.
13
2
Share

What does the red exclamation mark on the dashboard mean?

When a red exclamation mark appears on the car dashboard, it indicates a brake system failure. Possible causes of brake system failure include false alarms, excessively worn brake pads, insufficient brake fluid, or low brake fluid levels. Solutions for when the brake system warning light comes on are as follows: Severely worn brake pads: Brake pads come in two types—those with sensor wires and those without. For those with sensor wires, when the brake pads wear down to the limit, the sensor wire automatically completes the circuit, triggering the warning light. In this case, the brake pads need to be replaced. Low brake fluid or brake hydraulic fluid levels: Brake fluid plays a crucial role in the car's braking system. When the driver presses the brake pedal, the force applied is transmitted by the master cylinder piston through the brake fluid to the wheel brake cylinders, causing the brake pads to contact the wheels and stop the vehicle. Insufficient brake fluid can also lead to noticeably reduced braking power, and in severe cases, a complete loss of braking force. This issue can be resolved by promptly replenishing the brake fluid. Brake system oil leakage or false alarm: If the brake system warning light comes on while driving, slow down as much as possible, pull over to the side of the road, and then troubleshoot the cause of the issue.
18
0
Share

Where are the brake and accelerator pedals located in an automatic transmission car?

In an automatic transmission car, both the brake and accelerator pedals are located beneath the driver's feet. The accelerator pedal is on the right, and the brake pedal is on the left. Automatic transmission cars do not have a clutch pedal, only an accelerator pedal and a brake pedal. The accelerator and brake pedals in an automatic transmission car are positioned close to each other, which often leads to confusion or mistakes by novice drivers who may press the accelerator instead of the brake, resulting in collision accidents. When driving, it is crucial to stay focused to avoid operational errors. Always remember that the right pedal is the accelerator. When acceleration is not needed, keep your foot on the brake pedal to be ready to stop at any moment, ensuring you can control the vehicle's speed promptly in case of sudden situations.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.