Where is the first aid kit in the new Sagitar?

1 Answers
XavierDella
07/29/25 10:51pm
The new Sagitar does not come with a first aid kit. Generally, only high-end models with luxury configurations are equipped with first aid kits. If owners have a need, they can prepare their own first aid kit. The first aid kit is very compact and easy to place, requiring only a small space. It usually contains medical emergency supplies such as gauze. The new Sagitar is a joint venture A+ class sedan brand under FAW-Volkswagen. It features a six-ridge line diving front hood that matches the grille facade, combined with new LED headlights and front grille ambient lighting. The design includes a comet-style surrounding waistline, elastic surface design, a coupe-style C-pillar shape, and 18-inch two-tone wheels.
Was this review help?
4
5
Share
More Forum Discussions

What type of engine oil is suitable for Polo 1.4?

When changing the engine oil for a Polo, if you choose mineral oil, you can opt for 5w40 or 10w40; if it's semi-synthetic oil, you can use 5w40 or 5w30 that meets the VW50200 certification; if you prefer fully synthetic oil, you can choose from 0w30, 5w30, or 5w40. Below is an introduction to engine oil: 1. Engine oil serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and cushion shocks. 2. Engine oil consists of base oil and additives.
7
0
Share

How to Accurately Locate the Clutch Half-Engagement Point?

There are several methods to accurately locate the clutch half-engagement point: 1. Listen for changes in the engine sound. When the engine is under no load, the sound is relatively relaxed. When load is applied—i.e., when the clutch is lifted to the point where power transmission begins—the engine sound will start to deepen. 2. Feel the engine vibration. As the clutch is lifted to the half-engagement position, the car will transition from stationary to moving, accompanied by a noticeable vibration. 3. Rely on foot sensation. When the engine sound begins to change and the vehicle experiences slight vibrations, the clutch pedal will also produce a pushing sensation against your foot, indicating the clutch is in the half-engagement state. 4. Observe the tachometer. During the process of lifting the clutch, if the engine RPM drops significantly, it confirms that the clutch has reached the half-engagement position.
1
5
Share

What is the workflow of car painting?

The car painting workflow is divided into the following 7 steps: 1. Cleaning: First, thoroughly clean the car surface to remove dust and debris, and determine the repair process. 2. Oiling: Apply oil treatment to the area to be painted. 3. Sanding: Choose appropriate sandpaper to sand the area to be painted, ensuring all the paint is smoothed out. 4. Applying putty: After completely sanding off the paint, apply putty to the area. 5. Cleaning and masking: After applying the putty, use an air gun to blow off dust and impurities from the surface to prevent paint splatter. 6. Painting: Spray the pre-mixed paint at this stage, which can be done in 3-5 layers. 7. Finishing: After the paint dries, sand and adjust any uneven areas to make them look natural.
8
1
Share

Where is the Crown Brake Light Fuse Located?

The Crown brake light fuse is located inside the engine compartment. Brake lights are generally installed at the rear of the vehicle, with a red main body color to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the front vehicle brakes, even in low visibility conditions, helping to prevent rear-end collisions. Below are the inspection methods for automotive brake lights: 1. Check the brake light bulb. Frequent use of the brake light can cause wear on the bulb. If the filament breaks, the bulb will not light up. If the brake light does not illuminate, inspect whether the bulb is intact. 2. Check the brake light wiring harness connector. Refer to the circuit diagram to locate the connector in the brake light wiring harness. Unplug the connector and check if the pins inside are loose or corroded. If any issues are found, repair the corresponding pins to resolve the fault. 3. Check the brake light ground wire. The tail lights on a vehicle share a common ground wire. If the ground wire is broken or has a poor connection, the brake light will not function. Therefore, inspect the ground wire for any issues.
4
0
Share

How to turn off Toyota eco?

To turn off Toyota eco, you need to go to the settings on the display in the middle of the dashboard, press the menu button below, switch to the eco settings page, and select the option to turn off eco. Here is more information about eco: 1. The name ECO is derived from environmental protection, energy saving, and power synthesis. From the very beginning, it has been designed and developed with the basic concepts of technology, environmental protection, and economy. These three characteristics have also become the qualities that the ECO intelligent engine family series products always pursue. 2. ECO in a car means that the car can activate the energy-saving mode, making it more economical and fuel-efficient. ECO is mainly an energy-saving mode, and activating it can achieve the effect of saving energy. 3. The ECO mode is more like an intelligent fuel-saving companion, guiding and reminding the driver to drive in an appropriate way. When the optimal fuel supply is reached, the dashboard will simultaneously display the green "ECO" sign. If you press the accelerator pedal hard to accelerate or encounter a climbing section, the "ECO" sign will disappear.
10
5
Share

When was China 5 implemented?

China 5, the fifth-stage national motor vehicle emission standard, was implemented nationwide from January 1, 2017. Below is an introduction to motor vehicle emission standards: 1. From China I to China IV, each upgrade in the standard reduces single-vehicle pollution by 30% to 50%. 2. Motor vehicle pollutant emission standards are established to implement environmental protection laws, reduce and prevent vehicle exhaust pollution, protect the ecological environment, and ensure human health. 3. Compared to China IV standards, China 5 standards reduce harmful gas emissions such as nitrogen oxides by 43% for heavy-duty vehicles and by 25% for light-duty vehicles. Therefore, it not only significantly improves the environment but also benefits everyone's health.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.