Where is the First Aid Kit in the Car?

What to Do If Vehicle Emission HC Fails Inspection?

The reason for a vehicle's HC emission failing inspection is: HC exceeding the standard indicates incomplete combustion of vehicle fuel. The solution to incomplete fuel combustion is: clean the vehicle's fuel system and excessive carbon deposits in the combustion chamber to achieve complete fuel combustion. More details are as follows: 1. Vehicle emissions contain a variety of pollutants, up to hundreds of types, including solid suspended particles, carbon monoxide, carbon dioxide, lead, sulfur oxides, etc. 2. Therefore, vehicle emissions must be tested to comply with national emission standards to reduce pollution to nature and health threats to humans.

13

5

Share

Is Annual Review the Same as Annual Inspection?

Driver's licenses undergo annual review, while vehicles undergo annual inspection. They target different subjects, so they are not the same thing. Here is a partial introduction about annual review and annual inspection: 1. In addition to safety inspections for the vehicle, the annual review also involves checking the owner's driving license, driver's license, and vehicle insurance. If there are any traffic violations, they must be resolved; otherwise, the annual review cannot be passed. 2. Annual inspection refers to the testing of the vehicle, including checks on its appearance, chassis, lights, horn, and exhaust emissions. It is essentially a health check for the car, primarily aimed at promptly eliminating potential safety hazards, ensuring the vehicle meets standards, and reducing the occurrence of traffic accidents.

19

5

Share

Which is clearer between CCD and AHD for reversing cameras?

Comparing CCD and AHD reversing cameras, AHD offers higher clarity. The differences between AHD and CCD cameras are as follows: 1. Video resolution: CCD has lower connection complexity and higher resolution, while AHD cameras have lower resolution and relatively more noise. 2. Noise levels: CCD performs better in single amplification, with minimal noise, whereas AHD cameras show obvious noise when amplified. 3. Sensitivity: CCD varies with different standards under the same area; compared to CCD, AHD has smaller light-sensitive ports and lower sensitivity. 4. Power consumption: CCD requires additional voltage, resulting in higher power consumption, while AHD directly amplifies, leading to lower power consumption.

14

0

Share

What is the function of the balance weights on a Mitsubishi Pajero?

The function of the balance weights on a Mitsubishi Pajero is: 1. To maintain the dynamic balance of the wheels during high-speed rotation. This prevents the vehicle from shaking or the steering wheel from vibrating while driving, ensuring stable operation by balancing the wheel weights. 2. To ensure the balance of the tires, which helps extend the lifespan of the wheel tires and maintains normal vehicle performance. 3. To reduce wear caused by tire imbalance during vehicle movement. Additional information: Here are some details about the Mitsubishi Pajero: 1. The Mitsubishi Pajero is an imported ORV. 2. The Mitsubishi Pajero features a wide, powerful, and robust exterior, with a body length close to 5 meters and a width of nearly 2 meters. It is refined and elegant, commanding yet stable, with a strong sense of tension.

6

4

Share

How to install the fog light cover on Haval H6?

Use tools to pry open the fog light cover, then reinstall the new cover. Below is the classification of automotive lights: 1. Headlights, combined headlights are located at the front of the car, mainly serving for illumination and signaling. The light emitted by headlights can illuminate the road ahead, allowing drivers to drive safely at night. 2. Combined taillights, located at the rear of the car, primarily serve for illumination and signaling. 3. Turn signals, used to indicate left or right turns to other road users, required by regulations to be amber in color. 4. License plate lights, mainly used to illuminate the license plate, enabling drivers to identify the vehicle's license plate at night.

14

3

Share

How to Adjust the Headlight Height of the Mazda Atenza?

The steps to adjust the headlight height of the Mazda Atenza are: 1. Drive the car to a flat area with a vertical white wall, face the wall directly, drive straight towards it, and stop when the front of the car is as close to the wall as possible. 2. Mark a vertical line on the wall corresponding to the centerline of the car's front. 3. Locate the adjustment screw behind the headlight in the engine compartment. 4. Adjust the car's headlights to the desired height. Additional information: The functions of car lights include: 1. Headlights. There are two types: low beam and high beam, mainly used for nighttime driving illumination. Low beams are used for city roads with streetlights, while high beams are used for roads without streetlights or highways in rural areas. 2. Width indicator lights. Mainly used to display the width and length of the vehicle body at night. 3. Daytime running lights. Used to alert other vehicles and pedestrians during daytime driving for safety. 4. Turn signals. Used to indicate to other vehicles or pedestrians that the driver intends to turn. They are generally used for turning, lane changes, and emergency situations with hazard lights.

8

2

Share

Where is the First Aid Kit in the Car?

What to Do If Vehicle Emission HC Fails Inspection?

Is Annual Review the Same as Annual Inspection?

Which is clearer between CCD and AHD for reversing cameras?

What is the function of the balance weights on a Mitsubishi Pajero?

How to install the fog light cover on Haval H6?

How to Adjust the Headlight Height of the Mazda Atenza?

Is the C2 Driver's License Easy to Obtain?

Can I Take Subject Four Before Subject Two?

Will reversing at an intersection result in demerit points?

What is the seat height of the GSX250?