Where is the fault if the Verna's tachometer doesn't move?

1 Answers
ODamian
07/29/25 8:33pm
Beijing will directly implement the China VI-b standard from July 1, 2020. Here is a related introduction about China's vehicle emission standards: 1. Introduction to vehicle emission standards: Vehicle emission standards refer to the regulations on the content of harmful gases such as CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot) emitted from vehicle exhaust. 2. Current status of China's vehicle emission standards: China has its own national conditions, and the background for implementing emission standards is also different from that of Europe. The most directly involved issue is the urban-rural disparity. Therefore, China should have its own standards. The pollutant emission limits in China's motor vehicle pollutant emission standards are generally equivalent to the EU emission standards, so similar terms are also used domestically, but there are still certain technical differences between the two.
Was this review help?
10
1
Share
More Forum Discussions

What does the fault code FF041100 for Besturn B50 mean?

For decoding the fault code FF041100 of Besturn B50, it is strongly recommended to visit an authorized repair shop for inspection with a diagnostic scanner. Overview of fault codes: Fault codes are generated by the vehicle's ECU (Engine Control Unit) after analyzing malfunctions in the car. Generally, fault codes are caused by sensor failures or poor sensor performance. However, some mechanical faults cannot be recognized by the ECU. Function of fault codes: When the car engine malfunctions and is detected by the computer, the computer will display a fault code. With this code, maintenance personnel can more accurately locate the faulty component, thereby improving repair efficiency. Classification of fault codes: They are divided into intermittent faults and actual faults. Typically, intermittent faults can be cleared if they do not reappear. Actual faults must be repaired before they can be cleared.
7
2
Share

What is the Shouqi Enjoy Model?

Shouqi Enjoy Model is a standard A-class sedan with relatively low usage costs. Shouqi also offers a Comfort Model, which is a standard B-class sedan with comparatively higher costs. Beijing Shouqi Group Co., Ltd. is a leading comprehensive automotive service provider in China. After years of development, it has grown into an enterprise group integrating passenger transport, vehicle sales and maintenance, car rental, and refined oil sales. Shouqi Car-hailing is a product under Shouqi Group, developed and operated by Shouyue Technology Beijing Co., Ltd., serving as an internet-based car-hailing platform. On September 16, 2015, the Shouqi Car-hailing APP was officially launched. Unlike existing ride-hailing services in the market, all vehicles on the Shouqi Car-hailing platform are government-approved for taxi operations, bearing Beijing's distinctive 'Jing B' license plates for taxis, with drivers holding professional licenses, eliminating the need for refueling and maintenance.
18
0
Share

How many seats does the Volvo XC60 have?

Volvo XC60 is a five-door, five-seater medium-sized SUV. The Volvo XC60 is equipped with two engines: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine delivers 190 horsepower and a maximum torque of 300 Nm. This engine can output maximum power at 5,000 rpm and peak torque between 1,400 to 4,000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with an 8-speed automatic transmission. The high-power 2.0-liter turbocharged engine produces 254 horsepower and a maximum torque of 350 Nm, reaching peak power at 5,500 rpm. It also employs direct fuel injection technology, an aluminum alloy cylinder head and block, and is matched with an 8-speed automatic transmission. The Volvo XC60 has a body length of 1,447 mm, width of 4,266 mm, and height of 1,782 mm.
12
0
Share

Which Toyota model is the tv7181gl-id?

Toyota tv7181gl-id is the previous generation Toyota Corolla model equipped with a 1.8L naturally aspirated engine, produced around 2009-2010. Below is detailed information about Toyota: 1. Overview: FAW Toyota Motor Co., Ltd. was established in June 2000 and registered in Tianjin Economic-Technological Development Area. FAW Toyota has three major production bases located in Tianjin, Changchun (Jilin), and Chengdu (Sichuan), China. 2. Models: FAW Toyota's product lineup includes the "Vios" (VIOS), "Corolla" (COROLLA), "Allion" (ALLION), "Avalon" (AVALON) sedans, and "IZOA" (IZOA), "RAV4" (RAV4), "Crown Kluger" (CROWNKLUGER) SUVs, as well as the "Coaster" (COASTER) bus.
2
4
Share

What is the fuel consumption of the Nissan Cedric A33?

The comprehensive fuel consumption of the Nissan Cedric A33 is around 10L per 100 kilometers. Reasons for increased fuel consumption: Displacement: The engine displacement has a certain impact on the car's fuel consumption, but this impact is a fixed value. Tire pressure: The car's fuel consumption is also directly related to tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. Road conditions: The road conditions on which the car is driven will also affect fuel consumption. Methods to reduce fuel consumption: Start slowly, avoid sudden acceleration, shift gears at low RPM, avoid flooring the accelerator, avoid racing others at traffic lights, repair any dents on the car body, close windows at high speeds to reduce drag, coast in high gear (never coast in neutral as it can lead to steering and brake failure), and remember that personal driving habits can make a big difference. Drive safely: do not drive under the influence of alcohol, do not drive while fatigued, do not speed or overload, and always wear your seatbelt.
11
1
Share

Why can't the Fengjun 5 complete the stationary self-cleaning?

Fengjun 5 cannot complete the stationary self-cleaning for the following reasons: 1. Particulate filter clogged: At this time, due to internal clogging of the DPF, the exhaust flow resistance is very high, which affects the normal operation of the engine. 2. Particulate filter full. Due to the generation of soot particles, the soot particles inside the DPF gradually increase, increasing the exhaust resistance, and the engine's fuel consumption and power are affected by the increase in exhaust back pressure. Below is an expansion of the particulate filter regeneration process: A large amount of soot particles accumulate inside the DPF, affecting the exhaust back pressure, making it difficult for the exhaust gas to be discharged, greatly limiting the engine's power and fuel economy. The engine control unit, based on the signal from the exhaust pressure sensor, controls the engine to perform the soot cleaning and regeneration process on its own, burning the soot particles accumulated inside the DPF at high temperatures.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.