Where is the external circulation button on the Hyundai ix35?

What Happens If You Don't Change the Power Steering Fluid?

Failure to change the power steering fluid can cause varying degrees of impact and even compromise driving safety. The steps for replacing power steering fluid are as follows: Step 1: Use two jacks to lift the front wheels of the car. To reduce the load on the power steering pump, use two jacks to lift the front wheels, and remember to engage the handbrake. Step 2: Use a tube clamp to disconnect the return hose of the power steering fluid. Next, proceed to drain the old fluid by using a tube clamp to disconnect the return hose (apply moderate force to avoid damaging the connection), and place the hose into a waste container. It's advisable to cover the outlet of the reservoir to prevent leakage. Step 3: Turn the steering wheel left and right to drain the old fluid. Start the vehicle and turn the steering wheel left and right to expel the old fluid while simultaneously adding new fluid to the reservoir. When the drained fluid appears clean, it indicates that the old fluid has been completely removed. Step 4: Reinstall the hoses in reverse order and add new power steering fluid until the level reaches the maximum mark. Then, start the car and turn the steering wheel left and right to circulate the new fluid. During this process, the power steering pump may emit unusual noises, which is normal as it's drawing in the new fluid and expelling air.

3

5

Share

Where is the handbrake of the Camry?

The handbrake of the Camry is located behind the gear shift lever, which is a switch with the letter P, that is, an electronic handbrake. Pull it up to activate the parking brake. There is also another type located at the driver's foot position, where the pedal on the left side of the brake pedal is the handbrake pedal (it uses a foot-operated handbrake). The following is a related introduction to the Camry's handbrake: 1. After parking, step on it once, and you will see a red exclamation mark appear in the instrument panel area, indicating that the handbrake has been engaged. When starting the car, step on it again to release the handbrake, and the handbrake indicator light will be off at this time. 2. The handbrake is a system with a high frequency of use. Only reasonable and correct use can ensure smoother operation in the future, especially for the most common mechanical handbrake.

9

5

Share

What to Do When There's a Spring Sound When Pressing the Clutch?

When there's a spring sound when pressing and releasing the clutch pedal, it is a sign of a damaged release bearing. It is recommended to repair it immediately to avoid gear engagement issues. Below is relevant information about the clutch release bearing: 1. The clutch release bearing is installed between the clutch and the transmission. The release bearing housing is loosely fitted on the tubular extension of the transmission's first shaft bearing cover. A return spring ensures that the shoulder of the release bearing always presses against the release fork and retracts to the rearmost position, maintaining a gap of about 3–4mm with the end of the release lever (release finger). 2. Since the clutch pressure plate and release lever rotate synchronously with the engine crankshaft, while the release fork can only move axially along the clutch output shaft, directly using the release fork to move the release lever is not feasible. The release bearing allows the release lever to rotate while moving axially along the clutch output shaft, ensuring smooth engagement and gentle disengagement of the clutch, reducing wear, and extending the service life of the clutch and the entire drivetrain.

13

4

Share

What is the difference between red and green antifreeze?

There is essentially no difference between red and green automotive antifreeze. Antifreeze itself is a colorless and transparent liquid, and the different colors are due to dyes added to the liquid. The bright colors are simply meant to help users distinguish between different types of antifreeze during selection, preventing the mixing of different antifreeze types, which could damage the engine. Below is a related introduction to antifreeze: The main components of antifreeze are ethylene glycol, propylene glycol, and diethylene glycol. Ethylene glycol is generally green, propylene glycol is red with a hint of orange, and diethylene glycol is blue. The chemical properties of antifreeze can vary significantly depending on the color and brand, and their compositions also differ. Currently, ethylene glycol antifreeze is widely used in the market, with some phosphate-based variants available. If these two types of antifreeze are mixed, they can produce highly corrosive substances, causing significant damage to the engine. Even if the main components are the same, if the minor components differ, mixing is still not advisable. Therefore, when switching to a different brand of antifreeze, it is necessary to flush the system before refilling. Especially during summer use, never replace antifreeze with tap water or other liquids, as this can cause severe damage to the engine. The color of antifreeze is artificially added and should not be used as a criterion to evaluate its quality. When selecting antifreeze, choose based on the local temperature, generally ensuring it is at least 10 degrees Celsius below the region's lowest temperature.

3

5

Share

What vehicles can be driven with a B2 driver's license?

B2 permitted vehicle types: large trucks; permitted vehicles: heavy and medium-duty cargo trucks; large, heavy, and medium-sized specialized operation vehicles; other permitted vehicle types: C1, C2, C3, C4, M. Below is the relevant information: You can directly obtain a B2 driver's license: Common driver's licenses are divided into three categories: A, B, and C. The B2 large truck driver's license can be obtained directly when applying for the first time. Requirements for applying for a B2 driver's license: Age: Applicants must be at least 20 years old and under 60 years old; Height: Applicants must be at least 155cm tall; Vision: Applicants must have naked eye or corrected vision of at least 5.0 on the logarithmic visual acuity chart.

10

0

Share

Can the car still be driven if the thermostat is broken?

If the thermostat is broken, it is generally not recommended to continue driving the car. If there is no repair shop nearby, short-distance driving is possible, but it is necessary to constantly monitor the vehicle's temperature gauge and find a nearby repair shop as soon as possible to fix the issue. Only drive again after ensuring the vehicle is in good condition. Below is some relevant information about the thermostat: The thermostat automatically adjusts the amount of water entering the radiator based on the temperature of the coolant, changing the circulation range of the water to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within the appropriate temperature range. The thermostat must maintain good technical condition; otherwise, it can severely affect the normal operation of the engine. For example, if the main valve of the thermostat opens too late, it can cause the engine to overheat; if the main valve opens too early, it prolongs the engine's warm-up time, resulting in the engine temperature being too low.

13

5

Share

Where is the external circulation button on the Hyundai ix35?

What Happens If You Don't Change the Power Steering Fluid?

Where is the handbrake of the Camry?

What to Do When There's a Spring Sound When Pressing the Clutch?

What is the difference between red and green antifreeze?

What vehicles can be driven with a B2 driver's license?

Can the car still be driven if the thermostat is broken?

How Often Should the Handbrake Cable Be Replaced?

Will car body decals be checked by traffic police?

What type of oil should the Vezel use?

What are the body dimensions of the RAV4?