Where is the Envision's Cabin Air Filter Located?

2 Answers
LaRyan
07/24/25 4:14am
The Envision's cabin air filter is located inside the glove compartment on the passenger side. Its function is to filter dust particles from the air, providing clean air for the car's air conditioning system. Taking the 2021 Envision as an example, this model is classified as a midsize SUV with the following dimensions: length 4694mm, width 1839mm, height 1686mm, wheelbase 2750mm, fuel tank capacity 66 liters, and curb weight 1610kg. The 2021 Envision features a MacPherson strut front suspension and a multi-link independent rear suspension, powered by a 1.5T turbocharged engine.
Was this review help?
5
2
Share
SanAnderson
08/10/25 11:46pm
I remember clearly about locating the cabin air filter in the Buick Envision. As a long-time owner of this model, I've replaced it several times - it's positioned behind the glove compartment on the passenger side. First empty the glove box, then pull upward firmly to detach it, revealing the filter cover behind. Unscrew several clips to access the old filter. The placement is cleverly designed though slightly labor-intensive. I often remind friends that filters should be replaced every few months - stale air affects breathing comfort and AC efficiency. No special tools are needed, just your hands, but never compromise on cheap aftermarket filters. Regular attention to cabin air quality becomes a healthy habit. You'll notice significantly cleaner airflow post-replacement, especially during pollen season - fewer sneezes and better health. The process isn't complicated; just take your time during installation.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Why Tie a Red Cloth Strip on a New Car?

Buying a new car and hanging a red cloth strip is because red symbolizes joy, good fortune, and auspiciousness, believed to ward off evil spirits and ensure safe travels. Below is an introduction to new car maintenance knowledge: 1. Carry the vehicle maintenance record in the car. For every maintenance session, record the current mileage, maintenance details, including the replacement of the three filters, parts replacement, repair of faulty components, post-repair vehicle condition, maintenance time, usage precautions, etc., all truthfully in the record. 2. Ensure timely replacement of the vehicle's oil, fluids, and filters. Engine oil must be replaced every 5,000 km, gasoline should be refilled when the tank is one-third full, gear oil must be replaced every 50,000 km, brake fluid every 20,000 km, antifreeze every 30,000 km, and air filters and fuel filters should be replaced on schedule. 3. Choose safe and reliable genuine parts for replacements. Key and important parts should be genuine and purchased from reputable sources to avoid major losses for minor gains.
7
0
Share

What are the standard dimensions for a car parking space?

Here are the standard dimensions for car parking spaces: 1. Standard parking space dimensions: Width of 2.5 meters, length of 5 meters or more, with 2.5m x 5.3m being generally considered the optimal standard parking space size. 2. Angled parking space dimensions: Width of 2.8 meters, diagonal length reaching 6 meters, while maintaining the standard vertical distance of 2.5 meters between the two diagonal lines. Note: China's building codes specify complex design standards for garages and parking lots, dividing them into four levels. There is no specified 'standard parking space size', but rather minimum required dimensions are defined. For example, vehicles with length not exceeding 6 meters and width not exceeding 1.8 meters should have a spacing of no less than 0.5 meters between vehicles, and no less than 0.5 meters between vehicles and walls or parking space ends. For vehicles with length greater than 6 meters but not exceeding 8 meters, and width greater than 1.8 meters but not exceeding 2.2 meters, the spacing between vehicles should be no less than 0.7 meters, etc.
16
0
Share

Tutorial on Replacing the Battery in an Older Mercedes-Benz CLS55-AMG Key

Detailed instructions for replacing the battery in an older Mercedes-Benz CLS55-AMG key are as follows: 1. To replace the battery, first locate the button on the back of the key: After finding the button, press it and slide the back cover of the key forward to successfully open it. You will then see the battery in the adjacent slot. Open the slot, remove the old battery, and replace it with a new one. Next, reattach the back cover of the key to complete the battery replacement. 2. Pay special attention to the battery model when replacing the key battery: The remote key for Mercedes-Benz cars uses a 3V CR2025 battery, which can be purchased at stores. Also, note that the car remote key contains a battery that typically lasts 2 to 3 years. 3. Mercedes-Benz vehicles use two methods to indicate low key battery: One is when you press the ignition switch, the Mercedes dashboard will display a message to replace the key battery; the other is when you press the lock or unlock button on the key, if the indicator light on the key dims or does not light up, you should promptly replace the key battery.
20
5
Share

What is the length of the Volkswagen Sagitar?

Volkswagen Sagitar has a length, width, and height of 4753 mm, 1800 mm, and 1462 mm respectively, with a wheelbase of 2731 mm. In terms of power, the new Volkswagen Sagitar is equipped with a 1.2T turbocharged engine and a 1.4T turbocharged engine, with a fuel consumption of around 5.5L per 100 km. Below is relevant information: 1. The Sagitar brand was jointly established by Volkswagen AG and China FAW in 2006. The first-generation Sagitar product was a new A-class sedan introduced by FAW-Volkswagen in sync with Volkswagen's North American market strategy. The new Sagitar series is equipped with three types of engines: 1.4TSI, 1.8TSI, and 1.6L naturally aspirated, providing consumers with more choices. 2. The 1.6L naturally aspirated 4-cylinder engine in the new Sagitar is very mature in technology, featuring 4 valves per cylinder, which improves intake and exhaust efficiency compared to the previous generation's 2 valves per cylinder. Both low-speed torque and high-speed power are enhanced. The superior combustion environment inside the engine cylinders further reduces fuel consumption.
18
5
Share

Can Coolants of Different Colors Be Mixed Together?

Coolants of different colors cannot be mixed together, and even coolants of the same color may not necessarily be compatible. It depends on the brand and model. It is best not to mix coolants from different brands or models to avoid rendering the coolant ineffective due to differing chemical compositions. How to Choose Coolant: The basic indicators of coolant are its freezing point and boiling point. On the market, coolants come in several specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your area. How to Determine If Coolant Is Low: Observe the coolant warning light on the dashboard. If it lights up, it is likely due to low coolant levels, though it could also be caused by excessively high cylinder temperatures. Check the coolant reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add coolant promptly. Check the water level scale on the coolant tank. The normal coolant level should be between the maximum and minimum marks. To determine if the coolant is low, check the scale. If the coolant is below the minimum mark, it indicates a deficiency.
14
5
Share

What is the fuel tank capacity of the Fabia in liters?

The fuel tank capacity of the Fabia is 45 liters, as officially announced. The Fabia uses 92-octane gasoline, with a fuel consumption of 5.8-6L per 100 kilometers. A full tank can cover a distance of 750-775km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety level, and there is additional space from the safety level to the tank opening. This space ensures that the fuel in the tank can expand when the temperature rises without overflowing. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.