Where is the engine serial number located on the Buick Regal?

1 Answers
DeChase
07/29/25 10:47am
The engine serial number on the Buick Regal is located at the lower right rear of the car's engine. This serial number is a unique identification code assigned by the engine manufacturer in accordance with national regulations, industry practices, and engine attributes for a specific batch of identical products. Taking the 2020 Buick Regal as an example, it is a mid-size sedan with a length of 4904mm, width of 1863mm, height of 1461mm, a wheelbase of 2829mm, a fuel tank capacity of 55 liters, and a trunk capacity of 441 liters. The 2020 Buick Regal features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 250 Nm, paired with a 9-speed automatic transmission.
Was this review help?
2
1
Share
More Forum Discussions

Which generation is the 2010 Accord?

The 2010 Accord is the 8th generation. The 2010 Accord has a 4-door, 5-seat sedan body structure with dimensions of: length 4945mm, width 1845mm, height 1480mm, wheelbase 2800mm, front track 1590mm, rear track 1585mm, fuel tank capacity 70L, trunk capacity 447L, and curb weight 1430kg. The 2010 Accord features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine producing a maximum horsepower of 156PS, maximum power of 115kW, and maximum torque of 189Nm, paired with a 5-speed manual transmission.
20
0
Share

What are the causes of vehicle shaking while driving?

Vehicle shaking while driving can be caused by: 1. Excessive wear of the steering linkage ball joint; 2. Wear of the steering gear rubber bushing; 3. Deformed wheel hub, unbalanced or deformed tires; 4. Deformed drive shaft; 5. Excessive engine carbon deposits; 6. Aging engine components; 7. Ignition system failure. Methods to handle vehicle shaking while driving: 1. Firmly hold the steering wheel and engage the emergency brake; 2. Drive in a lower gear and quickly turn on the hazard lights; 3. Use roadside obstacles to gently rub against the vehicle, allowing it to slow down and pull over smoothly; 4. Place a red warning triangle on the roadside to indicate a breakdown; 5. Call emergency services and wait for assistance.
14
4
Share

How to Use an Automotive Air Conditioning Pressure Gauge?

The method for using an automotive air conditioning pressure gauge: The gauge marked with blue is the low-pressure gauge, used to measure low-end pressure and vacuum. Readings greater than zero in the clockwise direction indicate pressure scale, while readings greater than zero in the counterclockwise direction indicate vacuum scale. The gauge marked with red is the high-pressure gauge, used to measure the high-end pressure of the air conditioning system. The pressure in an automotive air conditioning system is influenced by various external conditions, such as ambient temperature, engine speed, and condenser cooling conditions. Therefore, the standard for testing automotive air conditioning system pressure is based on a specific ambient temperature, compressor speed within a certain range, and condenser cooling under certain conditions, rather than a fixed standard.
14
4
Share

How to adjust the ambient lighting in BMW X3?

BMW X3 ambient lighting adjustment method: First, turn on the ignition switch. There is a round button below the left side of the steering wheel; pressing it will pop up the adjustment interface for the ambient lighting. Then, adjust the brightness of the ambient lighting as desired. The ambient lighting in the car is a decorative illumination light, typically in colors such as red, blue, or green, primarily designed to enhance the cabin's appearance at night and create a more vibrant atmosphere. The BMW X3 is a mid-size SUV produced by BMW, with dimensions of 4717mm in length, 1891mm in width, and 1689mm in height, and a wheelbase of 2864mm. In terms of suspension, the front suspension features a double-joint spring strut front axle, and the rear suspension is a multi-link independent suspension.
8
5
Share

How Many Kilometers Should You Change Engine Oil?

How many kilometers you should change engine oil depends on the oil grade: 1. Fully synthetic oil should be changed every 10,000 kilometers; 2. Semi-synthetic oil should be changed every 7,500 kilometers; 3. Mineral oil should be changed every 5,000 kilometers. The functions of engine oil: 1. Lubrication, allowing sliding between the piston and cylinder, and between the main shaft and bearing bush to prevent part wear; 2. Auxiliary cooling; 3. Cleaning carbon deposits and sludge on engine parts; 4. Sealing and leak prevention, preventing gas leakage and entry of external pollutants; 5. Rust and corrosion prevention; 6. Shock absorption and cushioning; 7. Anti-wear.
3
2
Share

Why does the engine yellow light come on?

The reasons for the engine yellow light coming on are: 1. Sensor failure; 2. Fuel supply system failure; 3. Ignition system failure; 4. Intake and exhaust system failure. Precautions for daily use of the engine include: 1. Use clean fuel, as excessive impurities in the fuel can cause wear to the electric fuel pump; 2. Refuel promptly to ensure the engine's electric fuel pump provides sufficient fuel and stable working pressure for the injection system; 3. Do not disconnect electrical equipment circuits when turning on the ignition switch; 4. Regularly clean the fuel system and intake system. A dirty fuel system can lead to a series of issues such as blocked fuel lines, valves not sealing properly, poor fuel atomization, insufficient fuel supply, and low fuel pressure, all of which directly affect the engine's normal operation.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.