···
Log in / Register

Where is the engine radiator of the new Lavida located?

4 Answers
VonFinley
09/06/25 5:48am

The engine radiator of the new Lavida is located directly in front of the engine, in front of the electric fan. The car radiator, also known as the heat exchanger, is a key component in the automobile cooling system and part of the car engine. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release heat, and then returns to the water jacket to circulate and regulate temperature. The Lavida is an independently developed A-class car under SAIC Volkswagen, with dimensions of 4605mm in length, 1765mm in width, 1460mm in height, and a wheelbase of 2610mm. Different models of Lavida have different engine types. The Lavida 1.6L inline four-cylinder multi-point fuel injection engine has a maximum power of 77kw and a maximum torque of 155nm.

Was this review help?
9
1
Share
DelIvan
09/18/25 5:39am

As a driver with over a decade of experience, I'm very familiar with the location of the Lavida's engine coolant reservoir. It's positioned right at the front under the hood - you can spot it immediately upon opening. Located slightly to the right of center in the engine bay, there's a white or translucent plastic tank, usually labeled 'coolant' or with a coolant symbol on its cap. This component is the heart of the cooling system - when the engine heats up, it relies on this reservoir to dissipate heat and store coolant, preventing overheating issues. During my last long road trip when the temperature gauge fluctuated abnormally, I pulled over, waited for the engine to cool, and checked the reservoir - sure enough, the level was low. Adding the specified antifreeze promptly saved me from bigger trouble. Make it a habit to regularly check the level, ensuring it stays between the MIN and MAX marks - top it up when low. Important warning: Never open the cap when the engine is hot as pressurized coolant can cause severe burns. The placement is quite user-friendly - instantly recognizable and easy for beginners to locate without confusion. Ultimately, knowing its location can save significant repair costs - never neglect this critical component.

Was this review help?
9
2
Share
Expand All
VonPeyton
11/01/25 6:04am

Hey, I’ve been driving the new Lavida for half a year now, and I quickly figured out where the coolant reservoir is. It’s right under the hood, at the front center of the car—that small plastic container is the coolant reservoir, usually marked with a symbol on the cap for easy identification. The engine heats up fast during high-speed driving, and this thing keeps it cool; otherwise, it might start smoking. Maintenance is simple: turn off the engine, wait a few minutes for the coolant to cool down, then open the cap to check the fluid level. Keep it within the marked range, and if it’s low, just top it up with the original coolant from the dealership. I once added some myself during maintenance after watching a tutorial video—super easy. The location is straightforward, so you won’t miss it, but remember not to open it right after parking—it’s dangerous. Make it a habit to check it once a month. The convenient location makes it hassle-free, giving me much more peace of mind while driving.

Was this review help?
2
5
Share
Expand All
MasonLee
12/15/25 6:12am

From a daily car usage perspective, let me talk about the coolant reservoir in the new Lavida: When you open the hood, the container located centrally at the front is the coolant reservoir, which is directly connected to the radiator. Its function is to store liquid and assist in the engine's cooling circulation; neglecting it may lead to overheating and engine damage. The location is easy to find, with a clear design that makes it visible at a glance when opened. I occasionally check it myself, waiting for the car to cool down before slowly opening the cap to inspect the fluid level. For safety, just avoid touching it when the engine is hot. Its position near the front bumper makes it convenient for maintenance.

Was this review help?
7
4
Share
Expand All
More Forum Discussions

What causes the EPC light to stay on and prevent an Audi from starting?

Audi cannot start with the EPC light on may be due to faults in the engine management system or electronic control, or a dirty throttle valve body. Faults in the engine management system or electronic control: The warning light stays on. The EPC warning light staying on indicates a fault in the engine management system or electronic control, often accompanied by unstable idling or engine cold start shaking. This is usually caused by a dirty driving environment. Drive to a service station as soon as possible for inspection and cleaning the throttle valve to resolve the issue. Dirty throttle valve body: The EPC indicator light comes on during functional checks when the ignition is turned on. If this light stays on while driving, it indicates a fault in the engine power electronic control system. The engine must be checked immediately. A dirty throttle valve body, vacuum leaks in the intake system, a faulty brake switch, or an outdated engine software version may all cause EPC faults.
20
3
Share

Does Mercedes-Benz Have Manual Transmission?

Mercedes-Benz uses automatic transmission. P Gear: Parking gear, which should logically be in the first or last position. D Gear: Drive gear. While theoretically it could be placed anywhere, most current models feature manual-automatic integration. After shifting to D gear, there needs to be forward/backward (up/down) or left/right movement to operate manual mode or S (Sport) mode. Placing it in the middle is neither reasonable nor convenient, making the last position more logical. R Gear: Reverse gear. If positioned adjacent to N (Neutral) gear, there's higher risk of accidentally shifting to drive gear, which could lead to traffic accidents or transmission damage. Therefore, using N gear as a buffer in the middle is safer. This arrangement also facilitates shifting to neutral when stopping at traffic lights or during brief parking. N Gear: Neutral gear, positioned between reverse gear above and drive gear below for smooth shifting in both directions.
8
0
Share

Where is the subframe located?

The subframe is located below the engine. Also known as the auxiliary frame, it serves as a support bracket for the front and rear axles and suspension. The primary function of the subframe is to support the engine while connecting to chassis components. It is a crucial part of the engine compartment. If damaged, it requires replacement, and maintenance affects its performance. The subframe also supports the engine and transmission, enhancing the vehicle's chassis rigidity to some extent. Typically made of steel, high-end models may use cast aluminum alloy. To determine if the subframe is deformed, tools are generally used to compare diagonal lengths. The subframe, along with the axle and differential, forms an axle assembly. The suspension connects to the main frame either rigidly or flexibly (via rubber or hydraulic pads) through the subframe. Additionally, only vehicles with a unibody design have a subframe; those with a body-on-frame design do not.
5
2
Share

Is a small chip in the windshield caused by a stone a serious issue?

Is a small chip in the windshield caused by a stone a serious issue? A small chip in the windshield caused by a stone is not a serious issue. Here is some relevant information: Function of tempered glass: Tempered glass is made by quenching ordinary glass to create internal stresses, thereby strengthening the glass. When impacted and shattered, the glass breaks into small, blunt-edged fragments, reducing the risk of injury to passengers. Function of zone-tempered glass: Zone-tempered glass is a new type of tempered glass that undergoes special treatment. When impacted and cracked, it maintains a certain level of clarity in the cracks, ensuring the driver's field of vision remains unaffected. Currently, most car windshields are made of laminated tempered glass or laminated zone-tempered glass, which can withstand strong impacts.
16
1
Share

What Causes the Exclamation Mark on the Volkswagen Bora Dashboard?

There are five possible scenarios when an exclamation mark appears on the car dashboard: general faults, automatic transmission faults, brake system faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these five situations: General Faults: An exclamation mark inside a triangle indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Faults: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission issue or low transmission fluid level. The transmission fluid should be replaced promptly. Brake System Faults: An exclamation mark inside a circled parenthesis represents a brake system warning, typically due to brake system failure or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Abnormal Tire Pressure: An exclamation mark with a horizontal line underneath a parenthesis is the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Faults: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible. Alternatively, you can check the commonly used bulbs such as turn signals, fog lights, and interior lights yourself to identify the issue.
17
0
Share

How Many Years Does a New Car Need to Undergo Annual Inspection?

New cars generally require an annual inspection after six years. Here is the relevant information: Inspection Content: Annual inspection refers to the annual or biennial safety inspection of a vehicle, which includes a comprehensive check of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. The annual inspection is a routine review conducted on a yearly basis, typically referring to the inspection of certain formal IC cards, etc. Purpose of Annual Inspection: It is a mandatory test for every vehicle that has obtained an official license plate and registration certificate. Its purpose is to promptly eliminate potential safety hazards, encourage and enhance vehicle maintenance, and reduce the occurrence of traffic accidents, commonly referred to as vehicle inspection.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.