···
Log in / Register

Where is the engine of Wuling Hongguang from?

3 Answers
VanNolan
07/29/25 2:01pm
The engine of Wuling Hongguang is equipped with the P-TEC1.2L engine, which is designed and manufactured according to the global powertrain standards of General Motors. The engine model used in Wuling Hongguang is PTEC1.2L, with a maximum horsepower of 107 HP, a maximum power of 52.2 KW, a maximum power speed of 5500 rpm, and a peak torque of 145 N.m. The engine of Wuling Hongguang can be maintained daily using the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer; Regularly change the oil and filter. The quality of lubricating oil of any grade will change during use. After a certain mileage, the performance deteriorates, which will bring various problems to the engine. To avoid failures, the oil should be changed regularly according to the usage conditions, and the oil volume should be moderate; When the oil passes through the fine holes of the filter, the solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, allowing the oil to pass through the bypass valve, still bringing the dirt back to the lubrication part, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear.; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale can not only ensure the normal operation of the engine but also extend the overall life of the radiator and the engine.
Was this review help?
7
2
Share
MacAnastasia
08/13/25 5:42am
I'm someone who's particularly fascinated by automotive mechanics and always enjoy popping the hood to check out the structures inside. The engine used in the Wuling Hongguang is entirely domestically produced, mainly manufactured by SAIC-GM-Wuling at their factory in Liuzhou, Guangxi, which is quite something to be proud of. This engine typically comes in 1.2L or 1.5L gasoline variants, designed based on General Motors' technology but optimized locally, with performance leaning towards practicality—for instance, fuel consumption is well-controlled, and it drives smoothly in the city. I've driven a friend's Wuling Hongguang S and felt the engine noise was moderate, acceleration wasn't neck-snapping but sufficient for daily use, and repairs are easy with readily available parts. The advantage of domestic engines is their affordability and reduced reliance on imports, marking a significant step forward for 'Made in China,' making them ideal for budget-conscious buyers looking for reliable vehicles.
Was this review help?
5
1
Share
Expand All
KinsleyMarie
10/10/25 6:34am
As an office worker, I commute daily in a Wuling Hongguang, and the engine situation is quite straightforward. The engine it uses is domestically produced, apparently by SAIC-GM-Wuling themselves, with the factory located around Liuzhou. I think this choice is particularly wise because domestic engines have lower costs, keeping the car price at just tens of thousands of yuan, and maintenance expenses are also low—just 92-octane gasoline is sufficient. During daily city traffic jams, the engine response is steady and hassle-free. I've driven it for over three years, only needing oil changes, with no major issues. This localized production also makes after-sales service more convenient—any repair shop can handle it. In comparison, imported engines might be more expensive and harder to repair, giving the Wuling Hongguang a market advantage and making it a choice for many families.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

What kind of driver's license is required for yellow-plate vehicle drivers?

Yellow-plate vehicles require drivers to hold either a Class B or Class A driver's license. Yellow-plate vehicles are categorized into large trucks and large buses. Large trucks require either a B2 or A2 license, while large buses require an A1 license. Below is some information about license plate colors: Yellow-plate vehicles: Generally refer to large vehicles, such as trucks over 2 tons or buses. Large civilian vehicles: License plates feature yellow background with black characters; small civilian vehicles have blue background with white characters. Other license plates: Learner's plates have blue background with white characters, prefixed with the character "Learner". Temporary plates have white background with red characters, prefixed with the word "Temporary".
12
5
Share

How Long Does It Take to Replace a Car Door?

Replacing a car door takes 4-5 hours. Here are the considerations for door replacement: Choose a Professional Service: Door replacement has high requirements for parts. It is best to use an original manufacturer's door, and the color should match the vehicle. Considering color differences and part reliability, it is recommended to have the door replaced at a 4S shop. Check Installation Quality: Observe if the gap width of the car door is uniform and if the surface is smooth, otherwise, noise issues may occur. Check the door's sealing integrity to avoid rain or wind leakage. Repeatedly open and close the door to test for smooth operation or any unusual noises.
12
1
Share

Reasons for High Engine RPM but Low Vehicle Speed

Reasons for high engine RPM but low vehicle speed may include throttle valve malfunction and other causes. Below are detailed explanations of the potential faults: Throttle Valve Malfunction: The throttle valve is a controllable valve that regulates the flow of air into the engine. After entering the intake manifold, the air mixes with fuel to form a combustible mixture for combustion. If the throttle valve malfunctions, causing it to open suddenly, the engine RPM may spike abruptly. Fuel Pump and Fuel System Faults: Fuel injector leakage or clogging can prevent proper fuel injection as commanded by the electronic control unit, resulting in an overly rich or lean mixture. This may cause poor performance in individual cylinders and rough idling.
2
5
Share

What is the function of a car caliper?

Function of a car caliper: It serves to decelerate moving wheels, bring them to a stop, or maintain a stationary state, typically used exclusively in disc brake systems. It is the protruding part on the outer side of the brake pad, a component that enhances braking performance. The disc brake system in a car consists of a brake fluid pump, a brake disc connected to the wheel, and the brake caliper on the disc. During braking, high-pressure brake fluid pushes the piston inside the caliper, pressing the brake pads against the brake disc to generate the braking effect. Car calipers come in three colors: red, yellow, and gray. Yellow brake calipers are used on ceramic brakes and are the default brakes for Porsche GT3 models, usually found on cars with outstanding dynamic performance.
12
0
Share

The Accelerator Pedal is Too Stiff to Press

The reason why the accelerator pedal is hard to press may be due to excessive carbon deposits, poor fuel quality, or spark plug failure. Here are the related solutions: Excessive Carbon Deposits: There are many carbon deposits on the throttle valve, fuel injector, and intake manifold. Many malfunctions are caused by carbon deposits, and some vehicles may experience jerking, which is also related to carbon deposits. It is recommended to regularly clean the carbon deposits. Poor Fuel Quality: This leads to incomplete combustion. It is recommended to refuel at reputable gas stations with higher-quality gasoline. Spark Plug Failure: This can cause misfires, etc. It is necessary to go to a repair shop for inspection and timely maintenance to avoid more safety hazards.
5
1
Share

How to Replace the Cabin Air Filter in an Old Tiida?

Method for replacing the cabin air filter in an old Tiida: Remove the glove box and proceed with the replacement. It is recommended to replace the cabin air filter annually, as its function is to filter outside air to maintain fresh air inside the vehicle. Functions of the cabin air filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin; 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. The Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, with dimensions of 4393 mm in length, 1766 mm in width, and 1524 mm in height. The Tiida's engine utilizes technologies such as variable valve timing and double overhead camshafts, with an all-aluminum inline four-cylinder configuration.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.