Where is the engine of the Trumpchi GS8 produced?

1 Answers
VonEvelyn
07/24/25 5:05pm
The engine of the Trumpchi GS8 is produced domestically in China and is independently developed by GAC Motor. The Trumpchi GS8 uses the second-generation 320T engine developed by GAC, which is a self-developed product. The main technologies of the engine include low-inertia E-Turbo boosting technology, GCCS combustion control technology, and DCVVT dual continuous variable valve timing technology. It delivers a maximum power of 148 kW and a maximum torque of 320 Nm. Below is some relevant information: 1. The Trumpchi GS8 is equipped with a 2.0-liter turbocharged engine across all variants, producing 252 horsepower and a maximum torque of 390 Nm. The engine reaches its maximum power at 5,250 rpm and its maximum torque between 1,750 and 4,000 rpm. 2. This engine features DCVVT technology and direct fuel injection, with an aluminum cylinder head and cast iron cylinder block. It uses multi-point electronic fuel injection for intake and can run on 92-octane gasoline. The engine is paired with a 6-speed automatic transmission.
Was this review help?
6
0
Share
More Forum Discussions

What Causes the Left Side to Be Narrower Than the Right Side in Parallel Parking?

If the left side is narrower during parallel parking, it may be because the rear wheel pressed the line too early when turning left sharply, causing the wheel to turn before it was properly aligned with the line. Below are some related details about parallel parking: 1. Traditional parallel parking: Four poles were placed on the ground to symbolize the four corners of the parking space. One of the criteria for successful parking was whether the vehicle entered the space smoothly without touching these poles. 2. After the implementation of new traffic regulations: Parallel parking no longer uses poles; instead, ground markings are used to define the parking space boundaries. For learners obtaining a C1 driver's license, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. The vehicle should be driven parallel to the parking space, then reversed into the space without any pauses. As long as the vehicle is parked within the marked boundaries without crossing the lines, it is considered a pass.
3
1
Share

What adhesive should be used for a detached car roof liner?

The detachment of the car roof liner is generally caused by the aging of the fabric sponge. Special automotive glue or adhesive products can be used for bonding and fixing. Relevant explanations are as follows: 1. Glue bonding and fixing: Car owners can purchase a bottle of special automotive glue or adhesive products online, ensuring the glue is heat-resistant. Spray the glue along the detached area and then bond and fix it. 2. Fixing with clips: If the detachment is in the middle of the roof, it may be difficult to repair with glue. Car owners can opt for fixing with clips. Although the visual effect of the repair may not be ideal, it is generally acceptable. 3. Complete roof liner replacement: First, remove the roof liner, clean off the aged sponge on the surface, prepare a new piece of roof liner fabric, and use special roof liner glue. Apply glue to both sides, let it dry for 3-5 minutes, then bond them together. Finally, reinstall the roof liner. It is recommended that car owners leave this repair to a professional auto repair shop.
10
5
Share

What are the effects of a damaged pressure bearing?

Damaged pressure bearings can have the following effects: significantly increased tire noise while driving, with a buzzing sound in severe cases; and deviation in steering direction. Methods to prevent damage to pressure bearings: 1. Since pressure bearings bear part of the vehicle's weight and the vibrations generated during driving are transmitted through the suspension system to the pressure bearings, it is advisable to choose roads with better conditions and avoid rough roads. 2. When passing speed bumps, reduce speed and minimize driving over curbs, as excessive speed can lead to premature failure of pressure bearings. 3. Try to avoid turning the steering wheel while the vehicle is stationary. When the vehicle is stationary, the friction between the tires and the ground is greatest, and the pressure on the pressure bearings is also at its maximum. Reducing stationary turning can extend the service life of pressure bearings.
17
4
Share

How to Solve the Problem of Abnormal Noise in New Car Brakes?

Solutions for abnormal noise in new car brake discs: 1. If it's a screeching sound, first check if the brake pads are nearly worn out and the alarm piece is making noise. If they are new pads, check for any foreign objects caught between the brake disc and the pad. 2. If it's a dull sound, it's mostly an issue with the brake caliper, such as worn sliding pins or a fallen spring plate. 3. If it's a hissing sound, there could be multiple issues: the caliper, brake disc, or brake pads might be problematic. If the noise persists, first check for any dragging brakes. Poor caliper resetting can cause prolonged friction between the disc and pad, leading to abnormal noise under certain conditions. Then, check for any foreign objects stuck between the pad and disc. If the pads are new, inspect whether the brake disc has grooves, as localized friction can cause noise. If the disc is fine, consider whether the brake pads are too hard or if the noise-damping shims were installed incorrectly.
9
1
Share

Why does the car cross the line when exiting from parallel parking?

It is usually caused by reversing into the parking space too late. When the entire vehicle enters the space, it can no longer be straightened, resulting in directly crossing the right boundary line. Below are relevant explanations about parallel parking: 1. Traditional parallel parking: Four poles were placed on the ground to symbolize the four corners of the parking space. Whether the vehicle successfully entered the space and whether it touched these four poles was one of the criteria. 2. After the implementation of new traffic regulations: Parallel parking no longer uses poles, but instead adopts ground markings as the boundaries of the parking space. For learners obtaining a C1 driver's license, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. Drive the vehicle to a position parallel to the parking space, then reverse into the space to the right rear without any pauses. As long as the vehicle is parked within this range without crossing the boundary lines, it is considered a pass.
2
3
Share

Should the Nail in the Tire Be Pulled Out?

It is recommended not to pull out the nail by yourself when the tire is punctured by a nail, because the tire is in a rolling state while driving, and the nail may not be vertically inserted into the tire. If the nail is pulled out without timely repair, it may cause the tire to become abnormal and unrepairable. After the tire is punctured by a nail, the car can temporarily use the spare tire for driving, and then find a professional tire repair shop to fix the tire before switching back to continue using it. The following are the functions of car tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque to ensure good adhesion between the wheel and the road surface, improving the car's power, braking, and passability; work with the car suspension to mitigate the impact during driving and dampen the resulting vibrations. 3. Prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.