Where is the engine of the Soueast DX7 from?

How Many Kilowatt-Hours Does It Take to Fully Charge an Electric Vehicle?

This depends on the vehicle's battery capacity. Different new energy vehicles have varying battery capacities, so the number of kilowatt-hours required for a full charge cannot be generalized. Here are the relevant explanations: 1. Classification of Electric Vehicles: Electric vehicles are divided into AC electric vehicles and DC electric vehicles. 2. Energy Source of Electric Vehicles: Electric vehicles typically use batteries as their energy source, converting electrical energy into mechanical energy through components like controllers and motors to drive the vehicle. 3. Development Trends of Electric Vehicles in China: Electric vehicles align with the national trend of energy conservation and environmental protection, playing a significant role in China's environmental preservation and resource savings. Over a decade ago, electric vehicles were developed as a green industry in China, growing at an annual rate of 30%. Due to their obvious advantages, electric vehicles have become popular among urban middle- and low-income groups. In recent years, the electric vehicle market has maintained rapid growth, with new energy vehicles achieving mass production, gradually bringing the technology of the electric vehicle industry to international advanced levels.

11

2

Share

Why is the reversing image mirrored left and right?

The reason why the reversing image is mirrored left and right is that the front-view camera was mistakenly installed at the rear of the vehicle during the installation of the reversing camera. The front-view camera and the reversing camera are different. Here are the steps to correct it: 1. First, locate the reversing image settings in the system and engage the reverse gear. 2. Click into the settings and find the reversing mirror function. 3. Turn it off to restore the normal reversing camera. Relevant information is as follows: 1. Reason for the mirrored image: Some car models support the mirror function in the infotainment system, and it might have been accidentally enabled. 2. Function of the reversing camera: This system provides a more intuitive and clear view of the rear when reversing, making it one of the most practical configurations for reversing safety. When the reverse gear is engaged, the system automatically activates the high-definition reversing camera at the rear, displaying the rear view clearly on the reversing LCD screen.

7

3

Share

What is the script for 4S store regular maintenance invitations?

Mr./Ms. X, you have a beloved car with license plate XXXX scheduled for maintenance at our company on X/X. How is its current usage condition? Below are specific explanations about 4S stores: 1. Meaning: A 4S store is a sales outlet integrating automobile sales, maintenance, parts, and information services. The 4S model is a car franchise operation centered on "four-in-one" services, including Sale (vehicle sales), Sparepart (parts), Service (after-sales service), and Survey (information feedback). It features unified exterior design, logos, management standards, and exclusive operation of a single brand. As a distinctive physical market, it maintains channel consistency and unified cultural concepts, with obvious advantages in enhancing automobile brands and manufacturers' images. 2. Development: The 4S store concept was gradually introduced from Europe to China after 1998. Due to its close production-sales relationship with manufacturers, superior shopping environment, and strong brand awareness, it was widely emulated by domestic manufacturers. 4S stores adopt a distribution model of one or several equidistant exclusive stores per brand per region, constructed according to manufacturers' unified design requirements with massive investments ranging from millions to tens of millions, showcasing luxury and grandeur.

20

4

Share

How Much Refrigerant Should Be Added to a Car's Air Conditioning System?

Before adding refrigerant, it is necessary to use a pressure/vacuum machine to pressurize the system and check for leaks. If leaks are found, components such as the air conditioning pipe joints, condenser, evaporator, dryer, compressor, and other parts of the air conditioning system must be inspected using foam water to locate the leaks for repair or replacement. After replacement, the system should be pressurized again to check for leaks. Only after confirming there are no leaks should the vacuum process be performed before adding refrigerant. Below are additional details on the refrigerant charging steps: Connect the refrigerant gauge to the air conditioning system (both high and low-pressure pipes), then proceed with vacuuming. Choose low-pressure vacuuming (rotate the switch corresponding to the low-pressure gauge counterclockwise, while keeping the high-pressure gauge switch closed). Generally, there is no need to monitor the negative pressure value during vacuuming; a 3-minute vacuum is sufficient. After the time is up, tighten the low-pressure gauge switch, and then connect the refrigerant canister for charging (again, do not touch the high-pressure switch, only open the low-pressure switch).

19

1

Share

What Are the Symptoms of Needing an Oil Change?

When the engine oil is insufficient, the parts of the engine will rub against each other, leading to damage over time. Without the cooling effect, during high-speed operation of the engine, phenomena such as burning the crankshaft and bearing shells are likely to occur. It is recommended to replenish the oil as soon as possible when it is insufficient. Below is more relevant information: 1. The Role of Engine Oil: Engine oil, often referred to as the 'blood' of a car, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. 2. How to Add Engine Oil: When adding engine oil, it is generally sufficient to keep the oil level at the midpoint of the dipstick's marked range. Ensure the car is parked on a safe and level surface, as measuring the oil on an incline will yield inaccurate readings. Do not overfill the oil beyond the upper limit, as this can increase resistance on the crankshaft, leading to additional friction losses. Moreover, it can raise the pressure in the crankcase, increase oil consumption, and impair engine combustion.

19

5

Share

What does the MODE button on the Emgrand mean?

Mode switching button, mainly used to toggle between the infotainment system's music and radio modes. Functions vary by location: When the MODE button is positioned on the center console panel, it controls the switching of air conditioning vent modes. When located on the steering wheel, it cycles through multimedia modes, typically alternating between FM/AM/online radio/USB/local storage/Bluetooth music modes. Emgrand maintenance light reset procedure: 1. Turn off the ignition switch 2. Simultaneously press both arrow buttons 3. Turn on the ignition switch while keeping the arrow buttons pressed 4. After approximately 3 seconds, release both arrow buttons 5. The maintenance menu will appear prompting for reset confirmation 6. Press and hold the SET (reset) button for over 3 seconds 7. Press the MODE button 8. Turn off the ignition switch to complete the reset

10

2

Share

Where is the engine of the Soueast DX7 from?

How Many Kilowatt-Hours Does It Take to Fully Charge an Electric Vehicle?

Why is the reversing image mirrored left and right?

What is the script for 4S store regular maintenance invitations?

How Much Refrigerant Should Be Added to a Car's Air Conditioning System?

What Are the Symptoms of Needing an Oil Change?

What does the MODE button on the Emgrand mean?

Can You Add Tap Water to a Car Radiator?

What are the test contents for Subject 2 in Shenzhen?

Quick Fix for Squeaky Car Doors?

How to Warm Up Your Car in the Morning?