Where is the engine of the Geely Free Cruiser from?

1 Answers
MacDominic
07/29/25 6:21pm
Geely Free Cruiser's engine is the independently developed MR481QA four-cylinder 16-valve, double overhead camshaft, multi-point sequential electronic fuel injection engine by Geely. Below is the introduction of the four engines of the Geely Free Cruiser: 1. 1.0L naturally aspirated engine: The 1.0L naturally aspirated engine has a maximum power of 68 horsepower and a maximum torque of 88 Nm. The maximum power speed of this engine is 6000 rpm, and the maximum torque speed is 3600 rpm. This engine is equipped with CVVT technology and multi-point electronic fuel injection technology, and uses an aluminum alloy cylinder head and cast iron cylinder block. 2. 1.3L naturally aspirated engine: The 1.3L naturally aspirated engine has a maximum power of 86 horsepower and a maximum torque of 110 Nm. The maximum power speed of this engine is 6000 rpm, and the maximum torque speed is 5200 rpm. This engine is equipped with multi-point electronic fuel injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. 3. 1.5L naturally aspirated engine: The 1.5L naturally aspirated engine has a maximum power of 94 horsepower and a maximum torque of 128 Nm. The maximum power speed of this engine is 6000 rpm, and the maximum torque speed is 3400 rpm. This engine is equipped with multi-point electronic fuel injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block. 4. 1.6L naturally aspirated engine: The 1.6L naturally aspirated engine has a maximum power of 107 horsepower and a maximum torque of 137 Nm. The maximum power speed of this engine is 6000 rpm, and the maximum torque speed is 5200 rpm. This engine is equipped with multi-point electronic fuel injection technology and uses an aluminum alloy cylinder head and cast iron cylinder block.
Was this review help?
11
1
Share
More Forum Discussions

How to Open the Car Door When the Magotan Key is Locked Inside?

First, locate a square or circular grid on the driver's side door handle and pry open this grid. After removing the lock cover, you will find the mechanical keyhole. Using a mobile phone to remotely unlock the car requires the installation of a car cloud key system. If it's inconvenient to retrieve the spare key, you can choose to seek help from a locksmith company.
3
2
Share

How to Solve the Fogging Issue on Nissan Teana's Windshield?

When the fog is not particularly heavy, you can consider opening a small gap in the window on the driver's side, passenger side, or both sides. Make sure to appropriately increase the air volume. Using hot air to blow on the glass is more effective than using cold air. Car defogging sprays can be purchased at physical stores or online shops.
3
4
Share

What kind of wood is used for the interior trim in Audi cars?

Audi car interior trim is made of walnut wood. Wooden interior materials: Generally, wooden materials used in car interiors refer to walnut and rosewood, with walnut being more commonly used. The advantages of these woods are their beautiful grain, toughness, and resistance to deformation. Therefore, some mid-to-high-end cars use walnut wood as interior trim material, paired with genuine leather seat covers, velvet interior fabrics, etc., complementing each other to create an elegant and luxurious atmosphere. Imitation wood materials: Imitation wood materials first appeared as early as the 1970s. These are plastic products made from materials such as ABS, PVC (polyvinyl chloride), and PC (polystyrene). Modern film technology can make imitations so lifelike that they are indistinguishable from the real thing, with grain and gloss extremely similar to genuine wood materials. Even experts can only tell the difference by the paint, as only genuine wood products require multiple layers of paint to protect against moisture and UV radiation. Of course, mass-produced plastic imitation wood interior parts have identical grain patterns, whereas natural wood interior parts have unique grain patterns. Nowadays, some plastic products require special clear coats or other coating materials to resist aging, narrowing the quality gap between imitation wood interior parts and genuine wood interior parts. There is also another manufacturing method where an extremely thin layer of wood veneer is applied to a plastic base, making it look exactly like a genuine wood trim piece, thus allowing it to be marketed as walnut wood or other decorative elements.
4
0
Share

Why does the XRV sell better than the Vezel?

Differences between the XRV and Vezel: 1. In terms of appearance, the front-end designs of the two models are distinctly different. The Vezel's bold chrome grille trim leaves a stronger impression, while the XRV's front fascia appears more understated. The larger area of black plastic material on the XRV's front bumper gives it a more substantial look. 2. Regarding dimensions, the Honda XRV measures 4270 mm in length, 1772 mm in width, 1605 mm in height, with a wheelbase of 2610 mm. The Vezel measures 4294 mm in length, 1772 mm in width, 1605 mm in height, with the same 2610 mm wheelbase. The Vezel is slightly longer than the XRV. 3. In terms of powertrain, both models are equipped with the same 1.5L and 1.8L naturally aspirated engines, paired with either a 6-speed manual transmission or a CVT. Both feature a front MacPherson strut and rear torsion beam non-independent suspension setup. According to average fuel consumption data provided by owners, there is minimal difference in fuel efficiency between the two vehicles.
3
0
Share

What is the driving method of a scooter?

Start in neutral. First, shift the motorcycle into neutral. When starting a cold engine, let it warm up for a while before moving off (especially in winter, allow sufficient warm-up time), and at the same time, firmly grip the clutch lever. It's best to repeatedly engage and disengage the clutch a few times. The purpose of this is to ensure there is enough lubricating oil between the clutch plates to help with better lubrication, which will result in more complete disengagement. Then proceed to start moving. Below is an introduction to scooters: 1. Introduction: Scooters are basically equipped with continuously variable transmission (CVT) and automatic clutches, similar to Mulan-style electric vehicles. They have no gear design; after starting, you only need to twist the throttle to move. Releasing the throttle will cause the scooter to gradually slow down and stop automatically. Additionally, the wheels of scooters are smaller than those of other vehicles. 2. Basic Information: Scooters are basically equipped with continuously variable transmission (CVT) and automatic clutches, similar to Mulan-style electric vehicles. They have no gear design; after starting, you only need to twist the throttle to move. 3. Note: When riding, you can comfortably place your feet on the footboard, as if sitting on a chair, without needing to straddle the bike like with other motorcycles.
9
2
Share

What is the appropriate tire pressure for Lexus UX?

The normal tire pressure range for Lexus UX is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The Lexus UX tire pressure monitoring is displayed on the left side of the instrument panel's trip computer screen. By selecting the tire pressure monitoring interface via the steering wheel buttons, the display will show the current tire pressure. If an abnormality is displayed, driving the vehicle for a few minutes will allow the system to automatically reset and read the tire pressure. If the tire pressure monitoring indicator light comes on (a yellow symbol featuring an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside), there are generally three possible reasons: 1. Abnormal tire pressure. The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. 2. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system may still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this. 3. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving (e.g., by hitting an obstacle), the tire pressure fault light will illuminate. For sensor damage issues, the only solution is to replace it with a new component.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.