···
Log in / Register

Where is the engine number of Volkswagen Teramont located?

3 Answers
Sauron
09/06/25 5:21am
The engine number of Volkswagen Teramont is located on the left side of the engine. In addition to the engine, the engine number can also be found on the vehicle license, motor vehicle registration certificate, purchase invoice, factory certificate, vehicle purchase tax payment certificate, public security authority registration record, and vehicle insurance card. Below is a brief introduction about Volkswagen Teramont: 1. In terms of appearance, the design is very robust and majestic. The front grille features dual chrome-plated trim strips, which are connected with the headlights on both sides, highlighting its tough temperament. The side profile is square-shaped, with the waistline extending directly to the rear, creating an extremely dynamic look. The matrix-style LED taillights are connected by a chrome strip, adding a sense of fashion and sportiness. 2. In terms of power, SAIC Volkswagen Teramont offers two powertrain options for consumers to choose from: a 2.0T engine and a 2.5T V6 engine. In terms of transmission, it is matched with a 7-speed dual-clutch transmission, with a maximum power of 220KW and a maximum torque of 500N/M.
Was this review help?
19
4
Share
MacRuth
09/18/25 5:13am
From the several Volkswagen Teramont models I've serviced, the engine numbers are typically located on the right side of the engine block near the exhaust manifold. Open the hood, stand on the right front side of the vehicle, and look down to find a set of raised steel-stamped numbers on the black engine block, usually starting with a combination of letters and digits. Some owners report the location being somewhat concealed, often obstructed by the generator bracket - in such cases, using a smartphone flashlight helps. A safety reminder: it's better to check when the engine is cold to avoid burns from hot components. If you still can't locate it, you may also refer to the vehicle registration certificate or the label next to the VIN number at the lower left corner of the windshield. This engine number is required for ownership transfer and annual inspections, so it's good practice to have mechanics clean the stamped area during routine maintenance.
Was this review help?
6
2
Share
Expand All
OWilliam
11/01/25 5:40am
Last time I helped my friend locate the engine number of his Teramont, we puzzled over it for quite a while. Eventually, we found it engraved on a smooth surface area above the right side cylinder block near the firewall. The position is indeed quite tricky, so taller individuals might find it easier to access. If there's excessive dust in the engine compartment, it's advisable to do a quick wipe-down before searching. By the way, this number can also be found on the B-pillar door nameplate, but vehicle inspection authorities require verification of the stamped number on the actual engine block. Some owners who've modified their engine compartment shields might find it even harder to spot. From my experience, lying directly beneath the vehicle and looking upwards actually provides better visibility – using a smartphone to take photos and zoom in helps examine details. Cover the raised characters with tracing paper and gently rub the side of a pencil over it to create a clear imprint.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How to Start the Atenza?

The starting method for the Atenza is: 1. Enter the car with the key and press the brake pedal; 2. Ensure the gear is in P or N position; 3. Press the one-touch start switch. The Atenza is a mid-size car under FAW Mazda. Taking the 2020 Atenza as an example, its body dimensions are: length 4870 mm, width 1840 mm, height 1445 mm, with a wheelbase of 2830 mm. The 2020 Atenza is equipped with a 2.0L naturally aspirated engine, with a maximum power of 116 kW and a maximum torque of 202 Nm, paired with a 6-speed automatic transmission.
10
4
Share

What are the body dimensions of the Buick LaCrosse?

The body dimensions of the Buick LaCrosse are: length 5026 mm, width 1866 mm, height 1462 mm, with a wheelbase of 2905 mm. The Buick LaCrosse is a mid-size sedan launched by Buick, featuring a 4-door, 5-seat sedan body structure, a fuel tank capacity of 60 liters, and a trunk capacity of 523 liters. The Buick LaCrosse is equipped with a 2.0T turbocharged engine, delivering a maximum power of 174 kW at 5000 rpm, paired with a 9-speed automatic transmission. It uses a MacPherson strut front suspension and a multi-link independent rear suspension.
2
5
Share

What are the steps for pressurizing and evacuating a car air conditioning system?

The steps for pressurizing and evacuating a car air conditioning system are: 1. Connect the high and low-pressure hoses to the compressor's high and low-pressure ports respectively, and connect the middle hose to the vacuum pump; 2. Open the high and low-pressure manual valves and start the vacuum pump; 3. Close the high and low-pressure manual valves and observe whether the pressure gauge readings increase; 4. Close the high and low-pressure manual valves and turn off the vacuum pump. Car air conditioning refers to the air conditioning device installed in a vehicle, and its functions are: 1. To cool, heat, ventilate, and purify the air inside the cabin; 2. To provide a comfortable environment for passengers, reduce driver fatigue, and improve driving safety.
8
3
Share

Can Car Antifreeze Prevent Rust?

Car antifreeze can prevent rust. The components of antifreeze are: 1. Calcium chloride in inorganic substances; 2. Methanol in organic substances; 3. Ethanol; 4. Ethylene glycol; 5. Glycerol; 6. Lubricating oil; 7. Pure soft water. The full name of antifreeze is antifreeze coolant, which is a coolant with antifreeze function. It can prevent the coolant from freezing and cracking the radiator or freezing the engine cylinder block when parking in cold winter. The method of replacing car antifreeze is: 1. Open the car hood after the engine cools down; 2. Open the antifreeze tank cap; 3. Lift the vehicle and open the radiator drain plug, drain the old antifreeze and reinstall the drain plug; 4. Lower the car and pour antifreeze into the antifreeze tank.
15
0
Share

What does it mean when the ABS light is on on the car dashboard?

There are multiple states of the ABS light being on, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Loose connections between system lines or poor contact of the ABS relay result in poor signal quality, causing system failure. Solution: Check the line connections and reconnect any loose parts. State 2: ABS warning light intermittently turns on but goes off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS light turns off. The ABS system power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor electrical connection of the ABS hydraulic valve body; ABS computer failure. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light turns on during high-speed driving. Cause: At high speeds, the ABS computer detects a significant difference between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently turns on. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: Start the engine, press the brake pedal, push the brake switch linkage down with your finger, then release the brake pedal to complete the self-setting position; replace the brake light switch. If the ABS warning light is on, it is recommended not to continue driving. The ABS light indicates a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
1
3
Share

How to Remove the Steering Wheel of a Skoda Octavia?

The method to remove the steering wheel of a Skoda Octavia is: 1. Open the cover in the center of the steering wheel to expose the fixing screw; 2. Loosen the screw using a socket wrench. The steering wheel is connected to the steering shaft via splines, converting the force applied by the driver on the steering wheel's edge into torque, which is then transmitted to the steering shaft. The Skoda Octavia is a compact sedan with a 5-door, 5-seat hatchback body structure. Its dimensions are: length 4659 mm, width 1814 mm, height 1460 mm, wheelbase 2686 mm, fuel tank capacity 55 liters, and trunk capacity ranging from 590 to 1580 liters.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.