Where is the engine number of the Yujie 330 new energy vehicle located?

1 Answers
SerenityDella
07/29/25 5:45pm
The engine number of the Yujie 330 new energy vehicle is located on the lower left side of the front end of the engine, on the side plane where the cylinder block and the transmission housing meet. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle's driving license contains the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will specify the engine number; The purchase invoice will specify the engine number; The vehicle purchase tax payment certificate will specify the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number, however, refers to the production serial number of the engine. Each engine can only have one engine number, and each engine's number is unique.
Was this review help?
6
4
Share
More Forum Discussions

What are the reasons for weak car starting?

The reasons for weak car starting are: 1. Excessive wear of cylinder liners, pistons, and rings due to prolonged use, leading to insufficient cylinder pressure, reduced efficiency, and weak engine performance, usually accompanied by blue smoke from burning engine oil; 2. Incorrect valve timing, resulting in abnormal operation; 3. Issues with the fuel system or electrical circuit; 4. Excessive carbon buildup in the intake manifold; 5. Carbon deposits or incorrect gap in spark plugs. Transmission clutch failure can cause weak car starting. The function of the clutch is to transmit and cut off the engine's power. Manual transmissions, dual-clutch transmissions, etc., use friction plate clutches. Over time, the friction plates wear severely, leading to slipping and subsequently causing weak car starting. Additionally, dirty or insufficient transmission fluid can also result in weak car starting.
11
4
Share

What are the reasons for a car making a squeaking noise when starting but not firing up?

Car making a squeaking noise when starting but not firing up is due to: 1. The car is out of fuel. If the fuel gauge shows below the red line, it indicates no fuel and the owner needs to refuel the car, naturally it won't start; 2. Incorrect gear position. For automatic transmission cars, the gear must be in P or N position when starting. If it's in R or D position, the car won't start. For manual transmission cars, not pressing the clutch will also prevent starting; 3. Dead battery, caused by leaving headlights on for a long time or the battery reaching the end of its lifespan; 4. Installing xenon headlights, high-power audio systems, DVD players, etc., can also cause vehicle circuit failures; 5. Faulty spark plugs or ignition coils.
10
3
Share

What are the symptoms of a faulty coupler?

Symptoms of a faulty coupler include: the car may experience weak acceleration, rough gear shifting, and in severe cases, the car may fail to start. In microwave systems, it is often necessary to divide a microwave power into several paths proportionally, which is a power distribution issue. The component that achieves this function is called a power distribution component, or coupler, mainly including: directional couplers, power dividers, and various microwave branch components. An optoelectronic coupler is an electrical-optical-electrical conversion device that transmits electrical signals using light as the medium, consisting of a light source and a light receiver. The light source and the light receiver are assembled in the same sealed housing, separated by a transparent insulator. The pins of the light source serve as the input, while the pins of the light receiver serve as the output. Common light sources include light-emitting diodes, and light receivers include photodiodes and phototransistors.
6
2
Share

What are the causes of emission system failure?

The causes of emission system failure are: 1. Excessive spark plug gap; 2. The resistance value of the cylinder wire does not meet the requirements; 3. Failure of the oxygen sensor or carbon canister solenoid valve; 4. Excessive carbon deposits in the throttle or engine interior. The hazards of emission system failure are: 1. Excessive carbon deposits; 2. Affects the safety during vehicle operation and reduces the service life of the engine; 3. Causes sintering or detachment of the three-way catalytic converter carrier; 4. Excessive emission of harmful substances. The emission system is: The automobile exhaust system refers to the system that collects and discharges exhaust gases, generally consisting of the exhaust manifold, exhaust pipe, catalytic converter, exhaust temperature sensor, automobile muffler, and exhaust tailpipe.
2
5
Share

Which generation is the Toyota Camry produced in 2016?

The Toyota Camry produced in 2016 belongs to the seventh generation. The dimensions of the Camry are 4850mm in length, 1825mm in width, and 1489mm in height. In terms of suspension, the Camry features a MacPherson strut independent front suspension and a double-wishbone independent rear suspension. Regarding powertrain options, the Camry offers three different systems: a 2.5L hybrid, a 2.0L naturally aspirated engine, and a 2.5L naturally aspirated engine. The 2.5L hybrid system delivers a maximum horsepower of 160 hp, the 2.0L naturally aspirated engine produces 167 hp, and the 2.5L naturally aspirated engine generates 184 hp. For transmission, the 2.5L hybrid model is equipped with an E-CVT continuously variable transmission, while all other models come with a 6-speed automatic transmission with manual shift mode.
8
4
Share

What Do White and Yellow Solid Lines Mean?

Yellow solid lines serve to separate lanes of traffic moving in opposite directions. Think of them as a wall or fence dividing the road into two directions. White solid lines, on the other hand, are used to separate lanes moving in the same direction. Below are some relevant details: 1. Penalties: Crossing a white solid line constitutes a lane violation and typically results in a fine. Crossing a yellow solid line is considered driving against traffic, which carries a penalty of 3 demerit points and a fine. 2. Parking: When a yellow solid line is present along the roadside, it indicates that parking is prohibited, whether for extended periods or temporarily. If the roadside has a white solid line, temporary parking is generally allowed unless there is a no-parking sign. If both yellow and white solid lines are present along the roadside, parking is still prohibited, and violators will face demerit points and fines if caught.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.