···
Log in / Register

Where is the engine number of the Lynk & Co 03 located?

4 Answers
MacTheo
08/31/25 2:12am
The engine number of the Lynk & Co 03 is located behind the throttle body and can be seen by removing the engine cover. Taking the 2021 Lynk & Co 03 as an example, it belongs to the compact car category with body dimensions of: length 4639mm, width 1840mm, height 1472mm, and a wheelbase of 2730mm. The curb weight is 1395kg. The 2021 Lynk & Co 03 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 245Nm, paired with a 6-speed manual transmission.
Was this review help?
8
0
Share
OKai
09/12/25 5:45am
I frequently assist car owners with vehicle documentation issues, and locating the Lynk & Co 03's engine number is actually quite straightforward. Typically, it's directly engraved on the engine block itself. I recommend opening the hood—facing the front of the car, you'll spot a small metal tag or printed area, usually positioned on the upper front part of the engine near the cylinder block. Sometimes it's located on the right front side, such as near the battery box or intake pipe. If you can't find it immediately, check the vehicle's VIN plate, often attached to the lower edge of the windshield on the interior side, which may also include relevant details. Additionally, the engine number is recorded in the vehicle registration certificate or owner's manual as a handy backup. Remember to ensure the engine is completely turned off and cooled before checking to avoid burns. Regularly verifying this number helps prevent issues during ownership transfers or insurance disputes—it's quite important.
Was this review help?
4
5
Share
Expand All
VanSilas
10/26/25 6:36am
I drive a Lynk & Co 03 myself, and I looked for the engine number location right after buying the car. Specifically, it's on the top of the engine, with a small metal plate engraved with numbers. Just open the hood and look towards the front of the car to easily spot it. I found mine at the right front corner, near the air filter. If it's too dark to see clearly, you can use your phone's flashlight or take a photo and zoom in. It's recommended for beginners to check the owner's manual beforehand to confirm the exact page or use the car's app navigation guide. Another method is to indirectly locate it via the VIN code, which is usually on a label at the lower right corner of the windshield. Don't forget to confirm the engine number is intact during regular maintenance, as it's needed for transfers and insurance.
Was this review help?
1
5
Share
Expand All
RoseRose
12/09/25 6:56am
As a car enthusiast, I know that the Lynk & Co 03 engine number is located on the upper metal surface of the engine, usually stamped near the center of the cylinder block. Similar to Geely models, Lynk & Co's design is simple and easy to locate. The number is crucial and must be checked during vehicle transactions or accident claims. For daily reference, simply open the hood and locate it from the front of the car. If obscured by dirt, spray some cleaner and wipe it off. You can also refer to the vehicle's certificate of conformity or registration documents to avoid mistakes. Compared to other brands, Lynk & Co's placement is more intuitive, making it safe and easy even for beginners to operate.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Why is the engine warning light on the dashboard illuminated?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This refers to sensors including coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel/oil quality issues: Failure to use fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by oxygen sensors and reported to the ECU, the warning light will illuminate. Issues like spark plug failure, ignition coil problems, fuel pump malfunction, or fuel line blockages can all lead to poor combustion. Turbocharging problems: The intake boost piping or turbocharger can trigger the warning light. The most common issue is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black exhaust smoke. Intake system issues: Air intake problems may cause engine pipe blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can lead to intake problems. Exhaust system problems: Exhaust faults can also activate the warning light. Common causes include rear oxygen sensor failure, three-way catalytic converter issues, or exhaust camshaft and bearing failures. Using leaded gasoline, lead/silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may cause three-way catalytic converter problems. Anti-theft system malfunction: If the electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light illuminates, follow these steps: First check if the engine is operating normally. If there's noticeable shaking, black smoke, etc., avoid restarting the engine. Particularly important - never restart if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the ON position (without depressing the clutch). The vehicle will perform a self-check during power-on. After 5-10 seconds, observe if the warning light turns off. If the light remains on, visit a service station promptly. Technicians can use diagnostic tools to read trouble codes, identify specific issues, and perform targeted repairs.
1
1
Share

How to adjust the seats of Emgrand GL?

The method to adjust the seats of Emgrand GL is as follows: 1. Enter the vehicle and locate the seat adjustment switch; 2. Push the left switch forward or backward to adjust the seat's front and rear position; 3. Move the left switch up or down to adjust the seat's height; 4. Use the right switch to adjust the seat back angle. The Emgrand GL is a compact 4-door 5-seater sedan with body dimensions of 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm. It is equipped with a 1.4T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 104 kW and a maximum torque of 235 Nm. The drivetrain is front-wheel drive, with a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
10
4
Share

How to Open the Jaguar Fuel Tank Cap?

The method to open the Jaguar fuel tank cap is: 1. Press the key to unlock, and the fuel tank cap will pop open by itself; 2. Gently press the fuel tank cap. Jaguar is a British luxury car brand, and its models include: Jaguar XFL, Jaguar XEL, Jaguar F-PACE, Jaguar XF, Jaguar XJ, etc. Taking the 2020 Jaguar XFL two-wheel-drive Feng Hua version as an example, it is a mid-to-large-sized 4-door 5-seater sedan with body dimensions of: length 5093mm, width 1880mm, height 1456mm, and a wheelbase of 3100mm. It is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, with a maximum power of 147 kilowatts and a maximum torque of 320 Newton meters.
2
1
Share

What gear should be used when driving an automatic transmission car up a steep slope?

When driving an automatic transmission car up a steep slope, use the L gear, which is the low-speed gear. The method for starting an automatic transmission car on an uphill is: 1. Press the brake while pulling up the handbrake; 2. Shift the gear to L or S gear and gradually apply the throttle; 3. When the car's forward power is held back by the handbrake, slowly release the handbrake, and the vehicle will start climbing the slope smoothly. An automatic transmission means that the driver does not need to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. The gears of an automatic transmission car are: 1. P gear is the parking gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear; 5. S gear is the sport mode.
12
3
Share

What needs to be replaced during the second car maintenance?

What needs to be replaced during the second car maintenance includes: 1. Engine oil and oil filter; 2. Air filter; 3. Fuel filter; 4. Transmission fluid; 5. Cabin air filter. The second car maintenance refers to secondary maintenance or secondary service, and its inspection items include: 1. Spark plugs; 2. Brake fluid; 3. Throttle valve; 4. Fuel injectors; 5. Tires and braking system; 6. Engine belts; 7. Performance of headlights, warning lights, turn signals and car horn. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car servicing.
18
0
Share

How to Check for Inventory Cars?

Methods to check for inventory cars include: 1. Check the vehicle nameplate; 2. Inspect tire wear and manufacturing date; 3. Examine whether the inner wall of the exhaust pipe is clean; 4. Look for dust in the engine compartment, check if components are deformed, discolored, neatly arranged, or show signs of removal; 5. Inspect the vehicle's rubber parts for aging or detachment; 6. Check the foot pedals inside the car for wear or excessive dust in the gaps; 7. Observe the gaps in the front and rear bumpers, body gaps, and door gaps, open the doors to check for color differences between the interior and exterior paint; 8. Ensure the paint on the lower edge of the door frame is intact. Inventory cars refer to vehicles that have been in stock for more than 6 months without being sold.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.