···
Log in / Register

Where is the engine number of the JMC Ford Territory located?

3 Answers
StEthan
08/26/25 4:04am
JMC Ford Territory's engine number is located under the hood, in the front part of the vehicle. The Ford Territory features a youthful exterior design, primarily targeting urban young consumers. Its full and robust shape gives a sense of steadiness and reliability, while the floating roof design is very eye-catching, enhancing the overall sporty feel. The JMC Ford Territory is a compact SUV under the JMC Ford brand, equipped with a MacPherson independent front suspension and a multi-link independent rear suspension. The vehicle dimensions are 4580mm in length, 1936mm in width, and 1674mm in height, with a wheelbase of 2716mm.
Was this review help?
5
0
Share
DeNova
09/08/25 5:08am
I remember when driving the Jiangling Ford Territory, the engine number was on that small metal plate under the hood. The exact location was near the front of the engine, close to the radiator area—you could easily spot it once you popped the hood. The number was raised and engraved on the metal plate, making it practical and user-friendly. Last time I went for maintenance, I even brought a flashlight to check it because poor lighting might make it hard to read. This info is essential for vehicle identification, like when registering at the DMV or buying insurance. I’d suggest glancing at it regularly to ensure dust isn’t covering the digits—handy in case of an accident when you need to report it quickly to the towing company. Just remember to turn off the engine first for safety—don’t get burned! Finding it is a breeze, just a few steps.
Was this review help?
18
4
Share
Expand All
LeRuth
10/22/25 5:12am
As a driver who has owned this car for many years, I know the engine number is usually on the plate next to the engine block, visible at a glance when you pop the hood. It's typically located on the right side, with the numbers clearly stamped for identification during maintenance or ownership transfers. I always remind my friends to check the number after the engine cools down, using a small brush to clean off any dirt. The location is well-designed—no need to remove parts, making it hassle-free and reliable. The engine number links to the vehicle's history records, like being required on every maintenance slip, so remembering it correctly saves a lot of trouble. Regularly checking to ensure it's legible helps avoid last-minute panic. Simple yet practical knowledge.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

What kind of driver's license is required for yellow-plate vehicle drivers?

Yellow-plate vehicles require drivers to hold either a Class B or Class A driver's license. Yellow-plate vehicles are categorized into large trucks and large buses. Large trucks require either a B2 or A2 license, while large buses require an A1 license. Below is some information about license plate colors: Yellow-plate vehicles: Generally refer to large vehicles, such as trucks over 2 tons or buses. Large civilian vehicles: License plates feature yellow background with black characters; small civilian vehicles have blue background with white characters. Other license plates: Learner's plates have blue background with white characters, prefixed with the character "Learner". Temporary plates have white background with red characters, prefixed with the word "Temporary".
12
5
Share

How Long Does It Take to Replace a Car Door?

Replacing a car door takes 4-5 hours. Here are the considerations for door replacement: Choose a Professional Service: Door replacement has high requirements for parts. It is best to use an original manufacturer's door, and the color should match the vehicle. Considering color differences and part reliability, it is recommended to have the door replaced at a 4S shop. Check Installation Quality: Observe if the gap width of the car door is uniform and if the surface is smooth, otherwise, noise issues may occur. Check the door's sealing integrity to avoid rain or wind leakage. Repeatedly open and close the door to test for smooth operation or any unusual noises.
12
1
Share

Reasons for High Engine RPM but Low Vehicle Speed

Reasons for high engine RPM but low vehicle speed may include throttle valve malfunction and other causes. Below are detailed explanations of the potential faults: Throttle Valve Malfunction: The throttle valve is a controllable valve that regulates the flow of air into the engine. After entering the intake manifold, the air mixes with fuel to form a combustible mixture for combustion. If the throttle valve malfunctions, causing it to open suddenly, the engine RPM may spike abruptly. Fuel Pump and Fuel System Faults: Fuel injector leakage or clogging can prevent proper fuel injection as commanded by the electronic control unit, resulting in an overly rich or lean mixture. This may cause poor performance in individual cylinders and rough idling.
2
5
Share

What is the function of a car caliper?

Function of a car caliper: It serves to decelerate moving wheels, bring them to a stop, or maintain a stationary state, typically used exclusively in disc brake systems. It is the protruding part on the outer side of the brake pad, a component that enhances braking performance. The disc brake system in a car consists of a brake fluid pump, a brake disc connected to the wheel, and the brake caliper on the disc. During braking, high-pressure brake fluid pushes the piston inside the caliper, pressing the brake pads against the brake disc to generate the braking effect. Car calipers come in three colors: red, yellow, and gray. Yellow brake calipers are used on ceramic brakes and are the default brakes for Porsche GT3 models, usually found on cars with outstanding dynamic performance.
12
0
Share

The Accelerator Pedal is Too Stiff to Press

The reason why the accelerator pedal is hard to press may be due to excessive carbon deposits, poor fuel quality, or spark plug failure. Here are the related solutions: Excessive Carbon Deposits: There are many carbon deposits on the throttle valve, fuel injector, and intake manifold. Many malfunctions are caused by carbon deposits, and some vehicles may experience jerking, which is also related to carbon deposits. It is recommended to regularly clean the carbon deposits. Poor Fuel Quality: This leads to incomplete combustion. It is recommended to refuel at reputable gas stations with higher-quality gasoline. Spark Plug Failure: This can cause misfires, etc. It is necessary to go to a repair shop for inspection and timely maintenance to avoid more safety hazards.
5
1
Share

How to Replace the Cabin Air Filter in an Old Tiida?

Method for replacing the cabin air filter in an old Tiida: Remove the glove box and proceed with the replacement. It is recommended to replace the cabin air filter annually, as its function is to filter outside air to maintain fresh air inside the vehicle. Functions of the cabin air filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin; 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. The Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, with dimensions of 4393 mm in length, 1766 mm in width, and 1524 mm in height. The Tiida's engine utilizes technologies such as variable valve timing and double overhead camshafts, with an all-aluminum inline four-cylinder configuration.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.