···
Log in / Register

Where is the engine number of the GAC Fiat 1.4T located?

4 Answers
FernandoAnn
09/08/25 2:20am
The engine number of the GAC Fiat 1.4T is generally located on the side of the engine cylinder block, marked on an aluminum or iron plate. It usually consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be found through the following four ways: The vehicle's driving license has the engine number printed on it, usually located on the second last line; The motor vehicle registration certificate will state the engine number; The purchase invoice of the car will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number, however, refers to the production number of the engine. Each engine can only have one engine number, and each engine's number is unique.
Was this review help?
10
4
Share
DeAliyah
09/19/25 7:58am
I remember being frequently asked about this when driving the GAC Fiat 1.4T. The engine number is usually engraved on the engine block, positioned towards the front near the driver's side. You'll need to pop the hood, crouch down, and scan the front section of the engine—there might be a small plate or directly stamped alphanumeric sequence. Once, I encountered one positioned slightly towards the lower right corner, requiring a flashlight to read clearly. It can be tricky if the area is dim or heavily soiled. If you can't locate it, don't panic—check the vehicle registration certificate or owner's manual, as they often indicate reference locations. This number is crucial for ownership transfers or repairs, so avoid last-minute scrambling that could disrupt your plans. Always ensure the engine is cool before inspecting—safety first, don't burn yourself.
Was this review help?
19
3
Share
Expand All
TimothyLynn
09/19/25 8:00am
Let me tell you, locating the engine number on the GAC Fiat 1.4T is actually pretty straightforward. Just pop the hood, and you'll typically find it engraved on the front of the engine block, near the fan or water pump. From my experience, the serial digits are usually visible at a glance – just use your phone's flashlight if the lighting's poor. If you're still unsure, checking the illustrated diagram in the maintenance manual saves time and effort. Don't underestimate this detail; you'll need it for routine repairs or insurance registration. Once you've noted its location, you're set for next time.
Was this review help?
5
4
Share
Expand All
JaxonLynn
11/02/25 8:21am
I've looked for it several times, the engine number of the GAC Fiat 1.4T is usually located at the front of the engine block. Remember to turn off the engine for safety first, then open the hood and carefully check the front or top of the engine, where there's often a nameplate with numbers. If you find that some cars have it positioned more to the side, check a few more times to avoid missing it. It's important for identity verification, so don't be careless. If you can't find it, check the owner's manual for the exact location. The process is simple, just don't forget to wear gloves to protect your hands.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What to Do When the EFI Warning Light on a Motorcycle Comes On?

When the EFI warning light on a motorcycle illuminates, it is necessary to check the fault code table or use diagnostic equipment to read data and identify the cause. Below are specific solutions for addressing the illuminated warning light on a motorcycle: 1. Wiring Issues: Inspect the wiring from the generator's excitation winding terminal through the brushes to the regulator; check the wiring from the generator's stator three-phase winding terminal through the diodes and neutral point to the regulator; also examine the wiring connections for the warning light, switch, regulator, and battery. Verify whether there are grounding issues, open circuits, or unreliable connections in the wiring and terminals. 2. Regulator Malfunction: If a regulator fault is confirmed, first identify the specific issue. Generally, start by checking whether the contacts are burnt, dirty, or not conducting properly, and whether the contact return spring is faulty. The return spring adjusts the voltage level—stretching the spring increases the voltage, while shortening it decreases the voltage. Inspect the regulator coil and connecting wires for open or short circuits. The regulator should be adjusted using specialized equipment.
4
5
Share

How to Turn on the Heater in a Car AC?

After starting the car, wait for the temperature indicator to reach the middle position, then turn on the heater after about 8-15 minutes (some cars have a red heating mode, while others use a sun symbol), and set the AC to internal circulation. Do not turn on the A/C switch because the heater utilizes the car's own heat cycle. The direction of the warm air is generally toward the front and the feet. The specific steps are as follows: 1. After starting the car, wait about 8-15 minutes until the water temperature rises to the normal level, then you can turn on the heater. 2. Adjust the AC circulation mode to internal circulation. 3. Switch to the heating mode, which is indicated by a red zone in some cars and a sun symbol in others. 4. Do not turn on the AC (do not activate the A/C switch) because the heater uses the car's own heat cycle. 5. Adjust the AC to a suitable setting and direct the airflow from the vents. 6. The warm air is usually directed toward the front and feet, while the cold air is directed forward.
12
1
Share

What gear should an automatic car be in when reversing?

When an automatic car is stopped at a red light: If the expected wait time is less than 30 seconds, keep it in D gear + foot brake; if the expected wait time is more than 30 seconds, shift to N gear + handbrake; if the expected wait time is more than 2 minutes, shift to N gear + handbrake + turn off the engine. More details on gear selection when stopped at a red light are as follows: 1. Consider the waiting time. If it's less than 30 seconds, simply press the brake and keep the car in D gear. 2. If the wait is longer than 30 seconds, shifting to N gear is a more reasonable choice, and use the handbrake if on a slope (there's no need to shift to P gear). 3. The most reasonable way to handle gear selection at a red light is to shift to N gear and engage the handbrake, which applies to both manual and automatic cars. However, we should still be flexible in different situations. If the red light is very short, there's no need to shift to neutral—just keep it in D gear and brake gently.
18
4
Share

What to Do When the Car Display Screen Freezes?

There are many reasons that can cause the car display screen to freeze, which can generally be divided into two situations: one is freezing during use, and the other is being unable to restart when in standby mode. Below are solutions for a frozen display screen: 1. Third-party software. First, check if any new software has been downloaded recently. The freeze may be caused by unstable programs or insufficient memory. In this case, it is necessary to delete some memory and uninstall the related software. 2. Hardware damage. Next, examine the hardware to see if the screen is damaged, if there is an issue with the wiring, or if the IC and motherboard are causing the freeze, which is the most common phenomenon. If it is a hardware problem, the only solution is to take it to a 4S shop for maintenance or to a repair shop for inspection. 3. System upgrade. Check if the car system software has not been upgraded to the latest version, which could cause the display screen to freeze. If so, simply upgrade the software version. 4. Replace the navigation device. Finally, if many methods have been tried and none work, the only option is to have the car inspected and replace the navigation device with a new one.
11
4
Share

What does a circle with a slash on the Volkswagen Polo dashboard mean?

A circle with a slash on the dashboard represents average values, corresponding to metrics such as average fuel consumption or average speed. For example, if the dashboard currently displays this symbol with "17Km/h," it indicates the current average speed is 17 km/h. Similarly, if the circle with a slash is followed by "XXL/100km," it refers to the average fuel consumption. In reality, dashboard symbols are not limited to these—there are various others, such as: A little person carrying a large sword. This alerts you that the seatbelt is not fastened while driving. Buckling up significantly enhances personal safety during travel. A little person sitting on a toilet. This is not actually indicating someone using the toilet in the car but rather displays the temperature, showing a marker for -4°C. A teapot dripping water. This is the engine oil pressure warning light. When starting the engine, oil pressure hasn’t yet built up, so this light may illuminate for a second before turning off as pressure normalizes. This is more noticeable in winter but is normal and not a cause for concern. There are many symbols displayed on the dashboard, each with different meanings. When a symbol appears, promptly refer to it to identify the cause.
18
5
Share

What is the standard for matching engine speed and gear?

Shift to second gear when the engine speed is approximately 1000-1500 RPM and the speed is 10 km/h. Shift to third gear when the speed reaches 30 km/h. Shift to fourth gear when the speed reaches 40 km/h. Shift to fifth gear when the engine speed is around 2500-3000 RPM. Driving modes: Launch mode: Maintain the engine speed at around 4000 RPM. At this point, the torque output is at its maximum. When the clutch is released, the car will surge forward with the strongest burst of power, and the drive wheels may spin slightly. However, if the throttle is well controlled, idling can be minimized. Cornering mode: When cornering, if the throttle is opened too much, a high-powered rear-wheel-drive car may experience oversteer or even spin. Therefore, the speed should not be too high, depending on the horsepower. For a front-wheel-drive car like the 206, even with the throttle pressed, higher speeds are manageable as front-wheel-drive cars have better directional correction capabilities. Snow/Ice mode: Avoid skidding as much as possible. Apply less throttle when starting, or even start at a near-idle speed. In low gears, the speed generally should not exceed 3000 km/h.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.