Where is the engine number of Mazda CX4 located?

1 Answers
DiPaul
07/30/25 8:46am
Mazda CX4's engine number is located on the cylinder block on the intake side of the engine. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning and expanding the gas in the sealed cylinder, thereby pushing the piston to perform work. Engine maintenance items include: 1. Regularly change the engine oil and oil filter; 2. Keep the crankcase well ventilated; 3. Regularly clean the crankcase; 4. Regularly clean the fuel system; 5. Regularly maintain the radiator; 6. Maintain and clean the fuel system. Taking the 2021 Mazda CX4 as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4637mm, width 1855mm, height 1524mm, a wheelbase of 2700mm, a fuel tank capacity of 45 liters, and a curb weight of 1493kg.
Was this review help?
20
2
Share
More Forum Discussions

What documents are needed for driver's license renewal?

Driver's license renewal requires the following materials: 1. The identity certificate of the motor vehicle driver. 2. The "Motor Vehicle Driver's License". 3. A medical certificate of physical condition issued by a medical institution at or above the county level or the regimental level of the armed forces. 4. For applications involving special small automatic transmission passenger vehicles for the disabled, an additional medical certificate of physical condition issued by a specialized medical institution designated by the provincial health authority is required. The following are the contents of the motor vehicle driver's license review: 1. Road traffic violations and accident handling status; 2. Physical condition status; 3. Road traffic violation points and participation in study and examination after accumulating 12 points.
12
1
Share

Where is the car horn button located?

Car horn buttons are located on the left and right edges of the steering wheel, marked with small horn symbols. The horn serves as the vehicle's audio signaling device, allowing drivers to emit necessary sound signals as required by regulations during driving to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. Reasons for a non-functioning car horn include: 1. Horn contact erosion creating impedance, which weakens the current through the electromagnetic coil, reducing electromagnetic attraction and preventing it from attracting the armature to drive the diaphragm for normal vibration; 2. Improper sealing allowing water vapor to enter, causing damp contacts that fail to operate properly; 3. Incomplete removal of insulation paint on the enameled wire ends or loose rivet crimping resulting in poor contact.
2
4
Share

How to Turn on the Headlights of a Toyota Corolla?

Toyota Corolla's headlights can be turned on by: 1. Locating the lighting control assembly on the left side of the steering wheel and rotating it to turn on the low beams; 2. Pressing the lighting switch button below the left side of the steering wheel and pushing it in the opposite direction of the driver to turn on the high beams. The Corolla is a compact 4-door, 5-seater sedan with body dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, a wheelbase of 2700mm, and a fuel tank capacity of 50 liters. It is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW and a maximum torque of 185Nm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs an E-type multi-link independent suspension.
3
5
Share

How to Determine the Rear of the Car When Parallel Parking?

Stop when the front of the car is completely inside the parking space, and the rear will not extend beyond it. Here are the detailed steps: 1. When starting to reverse, turn the steering wheel one and a half turns to the right. Observe the top of the wheel in the right rearview mirror; it should be about 40 centimeters away from the right line of the parking space to ensure the right side does not cross the line during parking. 2. Watch the left rearview mirror, and when the left line of the parking space becomes visible, immediately turn the steering wheel half a turn back to the left and continue reversing. 3. Observe both rearview mirrors. When the solid lines of the parking space appear on both sides and the distances are roughly equal, immediately turn the steering wheel one full turn back to the left and continue reversing. 4. Watch the left rearview mirror until it completely covers the front line of the parking space, then brake.
19
5
Share

Should a car be equipped with a fire extinguisher?

For safety reasons, it is recommended to have one. Here are the relevant details: 1. According to the "Technical Conditions for Safe Operation of Motor Vehicles," vehicles should be equipped with a compliant triangular warning sign; medium-sized (and above) passenger vehicles and hazardous goods transport vehicles must carry a fire extinguisher and firefighting equipment within their validity period, securely installed and easily accessible. Violators will be warned or fined 20-200 yuan. 2. Currently, China has mandatory regulations for public transport vehicles such as buses, taxis, and hazardous material vehicles—which are either passenger-intensive or prone to fire—requiring drivers and relevant personnel to carry a fire extinguisher. There is no such strict regulation for private cars, but during annual inspections, a fire extinguisher must be present in the vehicle; otherwise, the inspection will not pass. For safety reasons, it is still advisable to have one.
16
0
Share

How to Remove Car Taillight Film?

To remove adhesive residue from hard surfaces like stainless steel basins or glassware, you can use nail polish remover or alcohol. After peeling off the label, apply non-greasy nail polish remover to the surface and gently wipe with a soft cloth. Industrial alcohol or gasoline can also be used to eliminate these marks. Methods for removing car taillight film are as follows: 1. For adhesive on plastic products, use a hairdryer on the hot setting to heat the adhesive, then slowly peel it off; 2. Use an eraser to rub the area, then remove any eraser debris; 3. Lemon juice can be used for cleaning; 4. Hand cream can also help remove adhesive because it contains a large amount of water, which in turn contains a certain amount of surfactants. These surfactants have excellent wetting, penetrating, and dissolving capabilities, allowing them to quickly penetrate between the adhesive and the surface, thus achieving the goal of removal. Similar products like facial cream, face wash, and dishwashing liquid also have some effect.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.