Where is the engine number of Hyundai ix35?

1 Answers
DelGenesis
07/29/25 10:01pm
The engine number of Hyundai ix35 is located on the side of the engine block. The Hyundai ix35 is equipped with a 1.4-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The 1.4-liter turbocharged engine has a maximum power of 103kw, a maximum torque of 242nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 1500 to 3200 rpm. It is equipped with direct injection technology and matched with a 7-speed dual-clutch transmission. The 2.0-liter naturally aspirated engine has a maximum power of 118kw, a maximum torque of 193nm, a maximum power speed of 6500 rpm, and a maximum torque speed of 4800 rpm. It is matched with a 6-speed manual transmission or a 6-speed automatic transmission. The Hyundai ix35 uses a MacPherson independent suspension for the front suspension and a multi-link independent suspension for the rear suspension.
Was this review help?
5
4
Share
More Forum Discussions

What are the solutions for minor leaks in car air conditioning?

Continuously using the external air circulation function allows high-humidity outside air to continuously enter the car, preventing the reduction of interior moisture. For situations where the interior air humidity is too high, you can occasionally open the windows to allow air convection. If the air conditioning is too cold, adjust the temperature appropriately. Replace the small refrigerator if necessary. If the evaporator is damaged, it should also be replaced. If the evaporator is clogged, inspect and remove any debris inside the evaporator.
9
4
Share

What to Do When a Car Tire Loses Air

Stay calm and don't panic. Reduce speed and avoid sharp steering or sudden braking, then drive to a safe location to stop and inspect. Check the vehicle's tires. If there is air loss, use an air pump if available to measure and replenish the tire pressure for each tire. If you don't have the necessary tools, ensure the tire has enough air to slowly drive to a refill station. If the tire is severely leaking, replace it with the spare tire as soon as possible, then drive to a repair shop for inspection and maintenance.
10
5
Share

What is the correct gear for auto start-stop at traffic lights?

Shift to neutral and engage the handbrake or electronic brake. Shifting to neutral can cut off the engine's power and also save fuel. Another method is to simply keep the gear engaged and press the brake, which is suitable for short-term parking.
8
3
Share

What to Do If You Drive Without Carrying Your Driver's License?

In this situation, don't panic, as no points will be deducted. You can download the "Traffic Management 12123" app, and after binding your information, it will also record your driver's license details. You can take a photo of your driver's license and store it on your phone as a supplementary proof. You can also input your ID card information and driver's license details into the app. It is recommended to always carry your driver's license when driving, and you can place it somewhere in the car.
20
2
Share

What to Do If Your Vehicle Exceeds the Annual Inspection Date?

There are generally two methods for making an appointment, one is by phone. Based on your scheduled appointment time. Queue up to take a number and wait for processing, which usually takes just a few minutes.
4
4
Share

Do You Need to Start the Engine When Replacing Coolant?

Replacing coolant does not require starting the engine. Once the engine is running, the coolant circulates, creating pressure in the coolant lines. If coolant is replaced at this time, the pressure can cause it to spray out from the nozzle, leaving the car without proper cooling protection and potentially damaging the engine. Steps for replacing coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipes, with a particular focus on the five-way hose. The five-way hose gets its name from having five connections to different parts of the car. Coolant flows through this hose and is distributed to various parts of the vehicle to perform its function. If there are signs of coolant leakage in this area, replace the hose or reseal the connections as needed. Drain the old coolant, then flush the system with clean water. Add water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may appear slightly pink. Continue flushing until clean water flows out. Remember to disconnect the heater hose to drain the water from the heater core. After about an hour of draining, add new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, fill the coolant reservoir with another bottle of coolant until it is nearly full. Start the engine and let it run for about 10 minutes. As air is purged from the cooling system, the coolant level will drop. Top it off until it reaches the "MAXT" mark on the reservoir.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.