Where is the engine number of FAW Jetta?

1 Answers
EmilianoDella
07/29/25 6:34pm
The engine number of FAW Jetta is located at the junction of the engine and the transmission, near the right side of the engine block. There is a relatively flat surface engraved with a combination of numbers and letters, such as the first three digits representing the engine code (e.g., BJG, ATK), followed by production date and other information. To locate the engine number, it is recommended to clean the surface of the engine for better visibility. FAW Jetta is a compact sedan under the Volkswagen brand, equipped with two types of engines: a 1.4L naturally aspirated engine and a 1.5L naturally aspirated engine. The front suspension of FAW Jetta uses a MacPherson independent suspension, while the rear suspension employs a compound torsion beam non-independent suspension.
Was this review help?
12
4
Share
More Forum Discussions

Will the insurance company compensate for a car without annual inspection?

Insurance companies only compensate for compulsory traffic insurance for cars without annual inspection. Below is the relevant introduction to car insurance: 1. Compulsory traffic insurance: Compulsory traffic insurance is a type of car insurance that the state mandates car owners to purchase. Other types of insurance may not be bought, but compulsory traffic insurance must be purchased by the car owner; otherwise, the car is not allowed on the road. 2. Vehicle damage insurance: Vehicle damage insurance generally covers the loss of one's own vehicle or the other party's vehicle. Normally, car owners will purchase this insurance. 3. Third-party liability insurance: Third-party liability insurance covers personal injuries or property damage to a third party. For example, if a traffic accident involves injuries to a third party, purchasing this insurance can result in compensation.
11
0
Share

What are the differences between the Wildlander and the Honda CR-V?

Here are the specific differences between the Wildlander and the Honda CR-V: 1. Price: The official price of the top-end Wildlander is cheaper than that of the top-end Honda CR-V. 2. Overall body: The body of the top-end Wildlander is longer than that of the top-end Honda CR-V, and the wheelbase of the top-end Wildlander is also slightly longer than that of the top-end Honda CR-V. 3. Overall configuration: The top-end Honda CR-V is more feature-rich than the top-end Wildlander. 4. Power: The top-end Honda CR-V is more powerful than the top-end Wildlander.
12
5
Share

What is equipment-related violation?

Equipment-related violation primarily refers to violations where production-related equipment and facilities fail to meet regulatory requirements. Below is more information about equipment-related violations: 1. Definition of equipment-related violation: It refers to any condition where the work environment, equipment, facilities, and tools do not comply with the "Electric Power Safety Work Regulations" and other relevant technical regulations, as well as various provisions and technical measures for ensuring personal safety, thereby failing to guarantee the safety of personnel and equipment. 2. Responsible parties for equipment-related violations: These are managers, supervisors, or direct leaders of the equipment (or facilities). Those responsible for accidents caused by equipment-related violations will be held accountable.
10
2
Share

What's the Difference Between Showroom Cars and New Cars at 4S Stores?

There is not much difference in appearance between showroom cars and new cars. However, for display purposes, the protective packaging on the car body is usually removed, and waxing may be applied to certain parts of the vehicle. There are three key points to note when inspecting a new car: 1. Check the paint surface: Pay special attention to the uniformity and smoothness of the seams. It's best to compare with another car of the same model. The gaps between doors, bumpers, and the engine hood should be consistent. If the gaps are too large or differ in width from other cars, choose carefully; 2. Check the tires: The tires of a new car should have no damage on the sidewalls. The front tires should have no puncture marks on the tread or sidewalls. Ideally, the tire hairs should still be present on both front and rear tires, with at least the rear tire hairs visible. If there are no tire hair marks on either front or rear tires but the odometer shows only a few kilometers, this is abnormal; 3. Check the nameplate: Each car's nameplate corresponds to a unique engine number and chassis number. Verify these numbers against the certification codes to ensure they match. Also, check the manufacturing date on the nameplate. The gap between the delivery date and the manufacturing date should not exceed three months.
20
4
Share

How to Connect Jumper Cables for a Car?

When connecting jumper cables for a car, first confirm whether it is 12V and ensure the negative terminal is grounded before proceeding with the connection. Below is relevant information: 1. Positive first, then negative: Always follow the sequence of "positive first, then negative" because once the negative is connected, it forms a circuit for the car. If the positive is connected last, when tightening the screw, a conductive wrench accidentally touching the car's metal would be equivalent to connecting the battery's positive and negative terminals together. This not only causes a short circuit in the car battery but may also lead to "sparking" in severe cases. 2. Battery: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Car batteries are categorized into conventional batteries, dry-charge batteries, and maintenance-free batteries. Typically, the term "battery" refers to a lead-acid battery. The normal lifespan of a car battery ranges from 1 to 8 years, largely depending on the vehicle's usage conditions.
1
5
Share

What are the causes and solutions for motorcycle starter slippage?

Motorcycle starter slippage causes and solutions are as follows: 1. Electromagnetic switch failure: Common faults in electromagnetic switches generally include short circuits, open circuits, grounding in the pull-in and hold-in coils, as well as burnt contact discs and points. Whether the coils are open or grounded can be checked by measuring resistance with an ohmmeter. When the starter operates, under the influence of magnetic force, only the armature core rotates while the shaft remains stationary, failing to transmit torque to the engine, resulting in starter slippage. 2. One-way clutch slippage: The main component of the transmission mechanism is the one-way clutch, which transmits torque in one direction only—from the starter to the engine flywheel—to prevent the flywheel from driving the starter motor at overspeed after the engine starts, which could cause damage.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.