Where is the engine number of Citroen C-Quatre located?

2 Answers
ElisaFitz
07/28/25 10:15pm
Citroen C-Quatre's engine number is located in the engine compartment of the vehicle, specifically on the right side of the aluminum casing at the front end of the cylinder block. The engine number consists of four parts: the prefix, middle section, suffix and tail section, which indicate the vehicle's specific model, production date and manufacturing plant code information. The Citroen C-Quatre is a compact 4-door 5-seater sedan with body dimensions of 4588mm in length, 1773mm in width, 1486mm in height and a wheelbase of 2610mm. It is equipped with a 1.6L naturally aspirated engine delivering maximum power of 86kW at 6000rpm, paired with a 5-speed manual transmission.
Was this review help?
9
0
Share
DiDallas
08/12/25 2:47am
As a Citroen C4 owner, I remember the engine number location is quite crucial. After opening the hood, the number is typically engraved on the metal body near the central top area of the engine, close to the windshield base - it's easy to locate in older 1.6L models. When searching, operating with a cooled engine is safest; keep a small flashlight or mirror handy as some spots may require dust wiping for visibility. This unique identifier is frequently needed for repairs or resale. If you can't find it, check the owner's manual rather than forcibly removing parts. When my car had minor issues, the mechanic used this number to diagnose problems. I recommend periodically photographing it for backup - a small time investment that pays off.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

How to Adjust the Time on Volkswagen Lavida?

Volkswagen Lavida is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 83kW (113PS) and a maximum torque of 145N·m at 3900rpm. On the dashboard of the Volkswagen Lavida, there are two buttons: the left one has a time symbol, and the right one is the 0.0/SET button. To calibrate the time display on the Volkswagen Lavida dashboard: 1. First, press the left time button. 2. When the time on the trip computer starts flashing, press the right SET button. 3. Pressing SET once adjusts the time by one unit, while holding down the SET button makes the time digits jump rapidly. 4. Adjust the digits to the desired accurate time.
6
3
Share

Which car brand does Kuangshi belong to?

Kuangshi belongs to the Hanlong Motors brand. Below is an introduction to the Kuangshi car: 1. Its exterior resembles the Land Rover Range Rover, leading many to jokingly call it the "domestic Range Rover." 2. In terms of details, the front features a large grille design with thick horizontal bars inside, combining a bold overall look with a touch of modernity. The use of horizontal lines visually enhances the car's width, and the floating roof design draws inspiration from Zotye's SUV models. 3. The interior boasts a futuristic design, with the dashboard incorporating the currently popular horizontal LCD display. It is powered by a TN4A20TDZ 2.0T engine, delivering a maximum power of 218 horsepower (160 kW).
6
3
Share

What is the fuel tank capacity of the Southeast DX3 in liters?

The fuel tank capacity of the Southeast DX3 is 45 liters, which is the officially announced data. Owners who have purchased the Southeast DX3 can also check this information on the vehicle's configuration sheet. The recommended fuel grade for the Southeast DX3 is 92 octane, with a fuel consumption of 6.9 to 7.3 liters per 100 kilometers. A full tank of fuel can cover a distance of 616 to 652 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is the volume from the bottom of the tank to the safety level, and there is additional space from the safety level to the tank opening. This space is designed to allow for fuel expansion when temperatures rise, preventing overflow from the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
6
3
Share

What is the weight of the Corolla?

The weight of the Corolla is approximately 1.2 tons, and the fully loaded weight is about 1.77 tons. Below is relevant information about the Corolla: 1. The Corolla (formerly known as 'Corolla') is a brand of Toyota. The Corolla uses Michelin 215/45R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, reinforced clutch, and high-performance brake pads to ensure excellent sports performance. 2. The Corolla is the tenth-generation straight-line upgrade of the Toyota COROLLA. The body size of the Corolla has significantly increased compared to the previous generation, presenting an unprecedented 'wide and low' stance, while also creating a spacious interior. The newly developed 1.6-liter and 1.8-liter engines with dual VVT-i technology deliver a more powerful driving experience.
5
5
Share

How to Remove the Rear Taillight of Baojun 510?

The steps to disassemble the rear taillight of Baojun 510 are as follows: There are clips in the middle of the four sides. Gently push the clips outward or inward to release them. First, remove two clips diagonally. When removing the third clip, be sure to hold the lamp cover, and then remove the fourth clip to take off the rear taillight. The rear taillight of a car consists of the following types of lights: 1. Brake lights are divided into two categories: left and right brake lights (two) and a high-mounted brake light (one). The left and right brake lights are important components of the rear lights, distributed one on each side of the rear lights. They are red, as red signifies a warning. The high-mounted brake light is usually installed on the upper part of the rear of the car, making it easier for vehicles behind to notice when the front vehicle brakes, thus helping to prevent rear-end collisions. 2. The reverse light automatically turns on when the driver shifts into reverse gear, mainly serving as a warning and providing illumination at night. 3. The reflector in the rear taillight serves to reflect light.
15
0
Share

How to Reset the Maintenance Light on Audi A3?

There are two methods to reset the maintenance light: using a car computer diagnostic tool and manual reset. I. Manual Reset Steps for Audi A3 Maintenance Light: 1. Press and hold the reset button below the odometer, turn the ignition key to OFF, and then release the reset button. 2. Then press and hold the digital clock adjustment button or analog clock adjustment button until the display shows "OEL," indicating the maintenance reset is complete. II. Computer Diagnostic Tool Reset Method: 1. With the engine off, press and hold the short-distance trip counter reset button below the tachometer. 2. Turn the ignition to ON, release the short-distance trip counter reset button, and the display will show "SERVICE." 3. Pull out the minute button on the clock, turn it to the right, and the odometer reading will appear on the display. Turn off the engine to reset the reminder, then turn the ignition to ON again, and the "SERVICE" message will disappear.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.