Where is the engine number of Chery Tiggo 5 located?

2 Answers
LaPatrick
07/25/25 1:50am
The engine number of Chery Tiggo 5 is located on the engine block, while the chassis number is stamped on the right side of the front compartment drain channel and on the instrument panel near the windshield. The vehicle's product label is fixed on the sheet metal of the front compartment drain channel. As the production version of Chery's concept car, the Chery Tiggo 5 is the second model produced on Chery's T1X platform. In terms of power, the Chery Tiggo 5 is equipped with a 1.5T engine model SQRE4T15, with a maximum power output of 112kW (152PS). It is paired with either a 7-speed manual or a 7-speed dual-clutch transmission.
Was this review help?
12
3
Share
McRyder
08/10/25 4:19pm
I've been driving a Chery Tiggo 5 for several years and am very familiar with the location of the engine number. Usually, after opening the hood, there's a small metal plate or the number directly engraved on the engine block near the top, close to the windshield, clearly visible. When checking, it's advisable to wait for the engine to cool down, find good lighting, and wipe off any dust with a cloth to avoid misreading. I remember once when selling the car, the buyer asked about it, and I pointed it out right there. The location is fixed; you'll need this number for maintenance or transfer, so don't be lazy. It's good to familiarize yourself with the engine bay; you can often spot it near the air filter. Overall, it's quite convenient, unlike some cars where it's hidden in hard-to-reach corners. Regular checks can help avoid sudden issues.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

What does emergency lane photography mean?

Emergency lane photography refers to the monitoring of vehicles to ensure they do not occupy the emergency lane without valid reasons. The emergency lane is designated for emergency parking of vehicles encountering sudden incidents on highways. Unauthorized use of the emergency lane, if captured by cameras, will result in penalties. Emergency lanes are primarily located on both sides of highways and expressways, serving vehicles involved in engineering rescues, firefighting, medical emergencies, and official duties handling urgent matters. No vehicles are allowed to enter the emergency lane arbitrarily. When a vehicle encounters an emergency and needs to use the emergency lane, it should park within the lane, immediately turn on the hazard warning lights, and place a warning sign 150 meters behind the vehicle.
13
0
Share

What Causes an Automatic Transmission Vehicle to Stall While Driving?

Automatic transmission vehicles may stall while driving due to the following reasons: 1. Generator malfunction; 2. Ignition system failure; 3. Fuel system issues; 4. Air intake system problems. Typically, automatic transmissions have six gear positions: P (Park), R (Reverse), N (Neutral), D (Drive), S (Climbing gear), and L (Low gear). In the event of a stall, avoid randomly turning the steering wheel or repeatedly pressing the brakes, as both steering and braking require power assistance. After stalling, you generally only have two opportunities to apply the brakes. If there are no special circumstances ahead, you can attempt to restart the vehicle without coming to a complete stop by quickly shifting the gear lever into neutral, turning the ignition switch to the start position. Once successfully restarted, promptly shift the gear lever back to D (Drive) to continue normal operation.
9
5
Share

What are the reasons for the Audi A6L air conditioner not blowing air?

Here are the reasons and solutions for the Audi A6L air conditioner not blowing air: 1. Clogged air filter: The main function of the air filter is to isolate dust, particles, moisture, and other attachments in the air. It also has a strong bactericidal and deodorizing effect, ensuring that passengers do not inhale harmful gases, which could threaten their health and driving safety. The air filter is usually installed above or below the blower. Therefore, air must pass through it to enter the cabin. If the air filter is clogged, poor air circulation can cause the air conditioner to stop blowing air. Solution: During inspection, the filter can be removed to observe if the airflow increases. 2. Blower damage: If the blower is damaged, it may not draw in enough air or fail to draw air at all, preventing the air from being blown out and causing the air conditioner to stop functioning. Long-term operation of the blower can lead to dust buildup inside the fan, increasing internal friction and potentially causing the coil to overheat and fail. Another possibility is leakage or damage to the capacitor in the blower, preventing it from working properly. This issue often occurs in capacitor-start blowers. Solution: The owner needs to visit a 4S shop or repair shop for maintenance. 3. Damper, computer, or switch failure: The damper is located inside the air duct and is made of plastic, which may become stuck or break. When the damper fails to open, the air drawn in by the blower cannot flow out through the vents, resulting in the air conditioner not blowing air. The air conditioner computer is the central control unit of the air conditioning system. If it malfunctions, no operations can be performed. Solution: The owner needs to visit a 4S shop or repair shop for inspection and repair.
7
1
Share

How to Distinguish Between the Brake and Accelerator in a Car?

Car brake and accelerator are distinguished as follows: 1. Automatic transmission: The leftmost is the brake, and the rightmost is the accelerator. Automatic transmission models do not require manual gear shifting, as the car shifts gears automatically, so there is no clutch pedal, only the accelerator and brake, both controlled by the right foot. During driving, the left foot should not be placed on the brake pedal. 2. Manual transmission: The middle is the brake, and the rightmost is the accelerator. Manual transmission models have three pedals, from left to right: clutch pedal, brake pedal, and accelerator pedal. In manual transmission models, the left foot is only used to press the clutch pedal when shifting gears, and should not be placed on the pedal during normal driving. Both the brake and accelerator are controlled by the right foot.
20
5
Share

What kind of engine oil is suitable for Lavida Plus?

Lavida Plus is suitable for fully synthetic engine oil, it is recommended to use 5W-40 or 10W-40. Car fuel consumption: Generally, the car's onboard computer will display the average fuel consumption value on the dashboard, but it usually differs from the actual fuel consumption. Specific car fuel consumption can be calculated using a formula. Car fuel consumption precautions: Plan your route before driving, check the traffic conditions, and try to avoid roads prone to traffic jams. Maintain a steady speed while driving. Unstable driving speed can increase fuel consumption by about 6% in suburban areas and 2% in urban areas. Avoid carrying unnecessary items in the car to reduce vehicle weight.
6
5
Share

Where is the Nissan One-Key Start Button?

Nissan one-key start button is located in front of the gear lever, press it to start the engine. One-key start: The one-key start device is part of a smart car, which is a button device that simplifies the starting process and can also turn off the engine. This device can be modified at the original car key lock position or installed as an independent panel. Precautions for one-key start: Steering wheel lock, turning off/starting the engine while driving, insufficient battery power of the smart key or malfunction of the smart key, starting the engine under special circumstances and other problems may cause driving accidents, which the owner should pay attention to.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.