Where is the engine number located on the JAC Tongyue?

Will you be notified on-site if the exam photo capture fails?

You will be notified on-site if the exam photo capture fails. More relevant information is as follows: Note 1: No matter which driving school you are in, try to arrive about half an hour early before the exam. Since most candidates taking the subject one exam are doing it for the first time, arriving early allows the team leader from each driving school to distribute admission tickets and provide detailed explanations on exam techniques and key points to pay attention to. Note 2: Bring your ID card, as before entering the exam room, you will need to scan your ID card and admission ticket on a card reader to be assigned a seat (randomly assigned number). Note 3: After receiving your seat number, find your seat. It is especially important to emphasize that you should not click the "Confirm" button on the screen until the invigilator gives the instruction. Just sit in your seat and do not perform any operations. If you are unsure, you can ask the invigilator or team leader at the time.

19

5

Share

How to Use the Clutch Correctly?

The correct method of using the clutch is as follows: 1. First, maintain the correct posture. The left foot should step on the clutch pedal with the heel touching the floorboard and not suspended. Adjust the seat position so that when the clutch is fully depressed, the leg still has a slight bend. This helps prevent the clutch from not being fully depressed or remaining in a semi-engaged state for extended periods. 2. During driving, the clutch is closely connected to the engine and should not slip. 3. Except for starting the car, shifting gears, and low-speed braking, there is no need to depress the clutch pedal at other times. Some drivers may have the bad habit of resting their foot on the clutch pedal while driving. Prolonged placement of the foot on the clutch pedal can lead to clutch slippage, burning of the clutch disc, and in severe cases, damage to the clutch pressure plate and flywheel surface, resulting in clutch slippage and other malfunctions.

3

0

Share

What are the letter sequences for license plates in Hebei Province?

Hebei license plate letter sequences include: Ji A - Shijiazhuang, Ji B - Tangshan, Ji C - Qinhuangdao, Ji D - Handan, Ji E - Xingtai, Ji F - Baoding, Ji G - Zhangjiakou, Ji H - Chengde, Ji J - Cangzhou, Ji O - Provincial Government Agencies, Ji R - Langfang, Ji T - Hengshui. Below is relevant information about license plates: 1. License plates, commonly known as vehicle tags, refer to the plates hung on the front and rear of vehicles. They are typically made of aluminum, sheet iron, plastic, or paper, and display the vehicle's registration number, registration region, and other related information. 2. License plates serve as identification and information registration for vehicles. Their primary function is to indicate the vehicle's region of registration, and they can also be used to trace the vehicle's owner and registration details.

4

2

Share

How Many Kilometers Can One Kilowatt-Hour Drive?

Under normal circumstances, in the NEDC comprehensive driving cycle, new energy vehicles can generally travel between 5 to 8 kilometers per kilowatt-hour, depending on the energy consumption performance of different electric vehicles. However, according to the law of energy conservation, the larger the curb weight, the higher the energy consumption per 100 kilometers will be, meaning the distance that one kilowatt-hour can drive will decrease. Related introduction to new energy vehicles: 1. Definition: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of onboard power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. 2. Classification: New energy vehicles include four major types: hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices).

7

2

Share

Why Can't the Car Door Be Opened with the Key?

The reasons why the car key cannot open the door are as follows: 1. The remote key may be out of power: Remote keys use button batteries, which may not be available in convenience stores. If there are auto parts markets or 4S stores nearby, these places will definitely sell them. Car owners can buy more online for emergency use. 2. The remote key is interfered with by signals: Signal interference with the key is relatively rare. If the key battery is confirmed to have power, it can be judged as signal interference. 3. Failure of the connection device between the door handle and the door lock itself: This situation leading to the door not opening is a type of fault, and the possibility of the car owner solving it on their own is very small. The door connection mechanism may fall off due to driving bumps, and the door lock cannot sense the action of pulling the door handle. 4. The door is frozen and cannot be opened in winter: If the door lock, door handle, or door frame area is frozen in winter, the door cannot be opened with the key. Note that if the door is frozen, do not pull it violently, as this can easily damage the door.

6

4

Share

What Causes a New Energy Vehicle to Suddenly Lose Power While Driving Normally?

Possible reasons are as follows: poor contact between the battery power output plug and socket; failure of the speed control handle; power signal system failure. The following are detailed explanations of the specific causes: 1. Poor contact between the battery power output plug and socket: This is usually caused by wear and oxidation over time, leading to poor internal circuit contact. 2. Failure of the speed control handle: This is generally due to poor contact among the three wires inside the speed control handle, typically red, gray, and black, or red, green, and black. The gray or green wire is the output signal wire of the handle. It is best to cut off the middle connector of the speed control handle wiring, reconnect according to the color difference, and then wrap it with insulating tape for safety. 3. Power signal system failure: If the electric vehicle is highly intelligent, it may also experience power loss. This mainly manifests as damage to the ignition lock or poor contact between the controller and the ignition lock signal wire. The simplest solution is to enable the keyless function.

10

2

Share

Where is the engine number located on the JAC Tongyue?

Will you be notified on-site if the exam photo capture fails?

How to Use the Clutch Correctly?

What are the letter sequences for license plates in Hebei Province?

How Many Kilometers Can One Kilowatt-Hour Drive?

Why Can't the Car Door Be Opened with the Key?

What Causes a New Energy Vehicle to Suddenly Lose Power While Driving Normally?

What Lights Should Be Turned On in Foggy Conditions?

What does OBU anti-tamper failure mean?

What are the reasons for the steering wheel being hard to turn when the car is cold?

Why Clean the Car Air Conditioning System?