Where is the engine number located on the JAC Refine?

3 Answers
PeytonAnn
07/29/25 4:37am
JAC Refine's engine number is located on the cast iron cylinder block near the fan wheel, below the right exhaust manifold. It is a rectangular plane on the cylinder block with stamped engine numbers. Similar to the car's VIN, the engine number is unique. Different manufacturers may have varying arrangements and contents in the engine number, but it generally includes the engine model, production date, and a randomly assigned serial number when the engine comes off the production line. The JAC Refine is a model that falls between a minivan and an MPV. In terms of body dimensions, the JAC Refine measures 5255mm in length, 1850mm in width, and 1970mm in height.
Was this review help?
10
4
Share
DiDamian
08/12/25 5:12pm
In my years of driving experience, locating the engine number requires a step-by-step approach. For Jianghuai Refine models, the number is usually engraved on the engine block itself, commonly found on the side of the cylinder block or the metal area at the front. After opening the hood, crouch down near the front of the engine and carefully feel or wipe areas with heavy dust. Some model years may have it hidden deeper, such as near the oil filter or close to the engine mount. I've encountered cases where the number was obscured by grease, so bringing a cloth and flashlight is very helpful to avoid spending too much time searching. The location is fixed, but it varies slightly between different models. Checking the vehicle manual or online forums can also help confirm, as this is crucial for registration or repair convenience.
Was this review help?
6
5
Share
Expand All
Eleanor
10/03/25 3:38am
As a new car owner, I was often confused about where the engine number was, but it's actually quite simple: open the hood and locate the large black iron block—that's the engine body. On the Jianghuai Refine, the number is usually found on the front right side of the engine, either engraved on a nameplate or directly cast on the cylinder block. Squat down and wipe off the dust with your hand to see it clearly. If it's hard to see, try feeling around the rough surfaces near the front of the car, but be careful not to burn your hands for safety. Remember, the exact position may vary slightly depending on the year and design, but the general location remains the same. Finding it will help with maintenance or ownership transfer, saving you hassle later on.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How Long Is the Warranty Period for Dash Cams?

The warranty period for dash cams is generally one year. When purchasing a dash cam, it is advisable to buy genuine products through official channels to ensure better quality assurance. Since dash cams are exposed to direct sunlight for extended periods, poor-quality devices not only have a shorter lifespan but also pose potential safety hazards. The primary function of a dash cam is to record the driving process. In the event of a traffic accident, it can provide video evidence to traffic police for determining liability. If encountering fraudulent claims (e.g., staged accidents), the footage from the dash cam serves as the most compelling evidence to avoid unnecessary complications. Most dash cams offer four resolution options: 1080FHD, 720P, WVGA, and VGA. For memory cards below 8GB, 720P is recommended, while 1080FHD is suitable for cards above 16GB. For daily urban use, setting the resolution to 1080FHD captures more detailed footage. During long-distance travel, 720P is recommended to extend recording duration and prevent mid-journey video overwriting.
19
2
Share

What Size Memory Card is Suitable for a Dash Cam?

The appropriate size of a memory card for a dash cam depends on the duration of the car owner's driving time, as there is no absolute size. Currently, dash cams on the market default to loop recording mode. In this mode, the memory card's space is never completely filled, so when selecting a memory card, you only need to choose one based on your driving duration. For example, a 16GB memory card recording 1080P video in loop recording mode can retain video for a maximum of about 100 minutes. Therefore, if your typical driving duration does not exceed 100 minutes, a 16GB memory card is generally sufficient. However, for longer durations, you may opt for a 32GB or 64GB card. In loop recording mode, the dash cam saves recorded videos in segments (such as 1-minute, 3-minute, 5-minute, or 10-minute clips) on the memory card. When the memory card is full, newly recorded videos will overwrite the oldest video segments. The primary purpose of loop recording is to prevent the memory card from becoming unable to record due to being full. It also eliminates the need for drivers to regularly clear the memory card, making it more convenient.
3
0
Share

How to Solve the Current Noise After Installing a DSP?

Solutions for current noise after installing a DSP are as follows: 1. During the installation of the DSP, the wiring for the signal input part should be as short as possible and firmly connected or soldered. 2. Use three-core or four-core shielded audio cables for the signal lines. When connecting, the shielding layer near the amplifier end should be grounded at a single point. 3. If noise persists after the above methods, shield the entire amplifier with a metal casing, ground the metal shell, and add high-frequency filtering components to the power supply section of the amplifier. The functions of a DSP are as follows: 1. Noise Reduction: The listening environment inside a car is very harsh, with road noise, tire noise, engine vibration, etc. The DSP amplifier removes in-car noise through A/D conversion, creating a pure listening environment. 2. Frequency Division: The DSP's frequency division solves the problem of poor connection between high, mid, and low frequencies. It also features a 31-band EQ adjustment system, allowing for flexible adjustment of gain at various frequencies. 3. Delay: The positions and distances of the speakers in the car vary. The DSP amplifier adjusts the timing of sound emission from the speakers, ensuring that sounds from all speakers reach the ears simultaneously for better music quality.
17
3
Share

Where is the Lincoln Continental fuse box located?

Lincoln Continental fuse box is located in the engine compartment. The fuse, also known as a circuit breaker, needs to be replaced by opening the fuse box, finding the fuse that needs to be replaced, pulling it out, and installing a new one. Here is some relevant information about fuses: 1. The fuse is also known as a circuit breaker, and the IEC127 standard defines it as a "fuse-link". It is an electrical component installed in a circuit to ensure the safe operation of the circuit. The function of the fuse is that when the circuit fails or is abnormal, and the current continues to rise, the rising current may damage some important or valuable components in the circuit, or even burn out the circuit and cause a fire. 2. If the fuse is correctly installed in the circuit, the fuse will melt and cut off the current when the current abnormally rises to a certain level, thereby protecting the safe operation of the circuit. When replacing the fuse, it is necessary to replace the fuse according to the rated current value indicated on the fuse box cover, and do not use a fuse with a higher rated current. If the new fuse blows immediately, it means that there may be a fault in the circuit system, and it should be repaired as soon as possible.
18
1
Share

Can China V Emission Standard Vehicles Be Upgraded to China VI?

China V emission standard vehicles cannot be upgraded to China VI. Most China VI emission standard vehicles currently on the market have upgraded their three-way catalytic converters to meet the China VI emission standards. Therefore, in theory, China V vehicles could become China VI standard vehicles only by upgrading the three-way catalytic converter. However, in reality, this is not feasible. To change the exhaust emission specifications, it would be necessary to upgrade components such as the three-way catalytic converter and the engine's ECU logic, but individuals cannot do this—only manufacturers can. Moreover, the state does not recognize such upgrades, as only automakers have the authority to perform them. All components of the engine are optimally matched during original manufacturing. If parts are replaced arbitrarily, issues may arise. Even if the three-way catalytic converter could be upgraded, the vehicle's records at the DMV cannot be altered and will remain as originally registered. Therefore, although theoretically, China V emission standard vehicles could be upgraded to China VI, in practice, it is not possible.
17
5
Share

What are the common faults of the Ford V348 diesel engine?

Clogged air filter; Nozzle does not spray fuel but drips, and is prone to carbon buildup, which is quite harmful to the engine; Early fuel supply timing, crisp sound with blue smoke; Issues with the fuel pump; Insufficient plunger pressure. The engine maintenance methods are: 1. Method one: Regularly change the oil and filter; 2. Method two: Use lubricating oil of appropriate quality grade; 3. Method three: Regularly clean the radiator; 4. Method four: Regularly clean the air filter, oil filter, and fuel filter; 5. Method five: Maintain good crankcase ventilation and clean it regularly; 6. Method six: Regularly clean the fuel system.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.