Where is the engine number located on the Ford Explorer?

1 Answers
DelAbel
07/29/25 3:55pm
The engine number of the Ford Explorer is located directly below the front passenger seat, near the foot pedal area on the chassis. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle license shows the engine number, usually located on the second last line; The motor vehicle registration certificate records the engine number; The car purchase invoice records the engine number; The vehicle purchase tax payment certificate records the engine number. Please note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is unique.
Was this review help?
9
1
Share
More Forum Discussions

Does the automatic deregistration of a motorcycle affect buying a car?

Motorcycle automatic deregistration will not affect buying a car. Precautions for motorcycle riding: Avoid racing with cars, drive safely according to traffic regulations, and yield to pedestrians. Do not follow too closely; maintain an appropriate distance behind the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; overtaking from the right or between two parallel vehicles is prohibited. Speed limits for motorcycles: On highways, motorcycles must not exceed 80 kilometers per hour. Exceeding this limit may result in penalties from traffic police. Additionally, riding without a helmet on highways will lead to being stopped and fined by traffic police, and carrying passengers on highways is strictly prohibited.
11
3
Share

What are the pros and cons of a straight-through exhaust header?

The advantage of a straight-through exhaust header is smooth exhaust flow and strong high-RPM horsepower. The downside is the loss of low-end torque in D gear, unpleasant odors, and environmental unfriendliness. Below are the hazards of modifying to a straight-through exhaust header: 1. Non-compliant exhaust emissions: Not only does it offer no benefits, but it also affects the vehicle's own power, as straight exhaust emissions fail to meet standards; 2. Loud noise: The modified straight exhaust pipe generally results in weaker low-RPM performance, increased noise, and excessively loud volume; 3. Higher fuel consumption: Untreated exhaust emissions exceed standards, causing severe pollution. The odor can drift into the car, and fuel consumption increases.
19
2
Share

What is the displacement of a 1.998L engine?

An engine displacement of 1.998L is essentially a 2-liter displacement. Introduction to Engine Displacement: Engine displacement, a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine can release more energy (converting chemical energy from fuel into mechanical energy) per unit time. Vehicles like off-roaders and sports cars typically have relatively larger displacements. Working Principle of Engine Displacement: The working principle of engine displacement involves the working volume swept by the piston moving from top dead center to bottom dead center. If an engine has multiple cylinders, the sum of all cylinders' working volumes is called the engine displacement, usually expressed in liters. Engine displacement is one of the most important structural parameters, more representative of engine size than bore diameter and cylinder count. Many engine performance metrics are closely related to displacement.
11
5
Share

How Does Car Cruise Control Work?

There are two types of car cruise control working principles: the latest electronic type and the traditional mechanical type. Below is a detailed introduction to the working principles: 1. Latest Electronic Type: The working process of the latest electronic throttle cruise control is more intelligent and precise. It controls the vehicle speed by adjusting the throttle opening size through the cruise control system, which regulates the signal output from the electronic throttle sensor. 2. Traditional Mechanical Type: The driver selects the speed based on road conditions and activates the cruise control system via a momentary switch to replace throttle pedal control. The system automatically adjusts the fuel supply according to the impact of slopes and road conditions on the vehicle speed, enabling the vehicle to maintain a constant speed. According to driving operation procedures, the cruise control function is automatically deactivated when the clutch pedal is pressed for gear shifting or the brake pedal is pressed, restoring throttle pedal control without any additional operations.
16
3
Share

What is the complete process of driving correctly?

The complete process of driving correctly is: 1. Step: Press the clutch pedal deeply with your left foot, ensuring it is fully depressed; 2. Shift: Engage the first gear. If the first attempt fails, pull the gear lever back to the neutral position and try again until successful; 3. Turn: Activate the left turn signal to alert vehicles behind you that you are about to start; 4. Honk: Sound the horn to also alert surrounding vehicles or pedestrians; 5. Release: Release the handbrake, as forgetting to do so may cause the engine to stall; 6. Steady and 7. Lift: Stabilize the throttle and gradually lift the clutch pedal. Once the clutch engagement point is found, gently press the throttle. The vehicle may slightly shake, then move your feet in opposite directions—slowly continue lifting the clutch pedal with your left foot while gradually pressing the throttle pedal with your right foot. The movements should be smooth.
11
2
Share

How many points are deducted for making a wrong turn and going the wrong way?

Making a wrong turn and going the wrong way will result in a deduction of 3 points. Situations where vehicles must yield: When there are traffic signs and markings indicating control, yield to the party with the right of way; in the absence of traffic signs and markings, stop and look before entering the intersection, yielding to vehicles coming from the right; turning motor vehicles must yield to vehicles going straight; motor vehicles turning right from opposite directions must yield to those turning left. Prohibited actions while driving: Motor vehicles are prohibited from reversing at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels. Motor vehicles may make a U-turn at locations where there are no signs or markings prohibiting U-turns or left turns, but must not obstruct the normal passage of other vehicles and pedestrians.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.