Where is the engine number located on the Dongfeng Xiaokang engine?

3 Answers
LeMaddox
07/29/25 3:31am
The engine number of Dongfeng Xiaokang is located at the lower left front of the engine. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked in the following 4 ways: The vehicle license shows the engine number, usually on the second last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. Note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is unique.
Was this review help?
2
5
Share
JustinMarie
08/12/25 2:22pm
I've been driving Dongfeng Xiaokang for several years, and experience tells me that the most common location for the engine number is on the front of the engine block, specifically on the metal surface near the ignition coil or exhaust manifold. There's usually a small nameplate or a code directly stamped on it. Once, when my car went for inspection, the number was covered by oil stains, and it took some effort to clean it off. Remember to bring a flashlight and a soft cloth. After opening the hood, carefully look from top to bottom, avoiding the hot pipes. The location may vary slightly for different model years—for example, the 2018 model might be slightly to the left, while the 2020 model is more centered—so it's best to refer to the user manual to confirm, to avoid wasting time looking in the wrong place. This small detail is crucial for vehicle registration and transactions, so don’t take it lightly. During routine maintenance, take a moment to check if the number has shifted or worn out.
Was this review help?
13
4
Share
Expand All
AnastasiaAnn
10/02/25 6:37am
After years of repairing vehicles, the engine numbers of microvans like Dongfeng Xiaokang are mostly located on the side or front cylinder block of the engine body, near the fan pulley, directly engraved on the metal surface. When searching, turn off the engine and let it cool for a few minutes, then use a magnifying glass or phone light to illuminate the area, gently brushing away accumulated dust or dirt. Avoid prying parts randomly, as it can easily damage sensor wiring harnesses. If it's still hard to see, try looking from underneath the chassis—sometimes the position is more obvious, but be careful not to crawl under the vehicle for safety. As a reminder, the engine number is a mandatory item for vehicle inspections. Recording it during regular maintenance can save a lot of hassle, especially when buying/selling used cars or handling insurance claims where quick verification of the number's authenticity is needed.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

What is the ground clearance of the Audi Q2L?

The ground clearance of the Audi Q2L is 142 millimeters. Here is more information about the chassis of this vehicle: 1. The suspension setup consists of a front MacPherson strut independent suspension and a rear multi-link independent suspension, which is consistent with the Audi A3 that also uses the MQB platform. 2. The chassis is composed of four parts: the transmission system, the running gear, the steering system, and the braking system. It supports and mounts the car's engine and its various components and assemblies, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation. 3. Since the chassis is constantly exposed to very harsh working conditions, it suffers significant damage and corrosion. When driving in the rain, the chassis comes into direct contact with water; in snowy conditions, it directly interacts with cold snow; and on rough mountain roads, the chassis is subjected to the torment of gravel and other harsh environments. These special road conditions can cause considerable damage to the chassis. Therefore, regularly checking the chassis for rust is one of the essential measures to effectively protect it.
8
5
Share

What is the appropriate tire pressure for entering Tibet?

There is no need for any special gas; regular air will suffice. The normal tire pressure for cars generally ranges between 2.2 and 2.5 bar. However, car tire pressure is not fixed and should be adjusted appropriately based on factors such as season, load capacity, and driving routes. Standard tire pressure can usually be found in the following places: the vehicle's user manual, the label near the driver's door (close to the B-pillar), or the drawer next to the driver's seat. Additional relevant information is as follows: 1. Overinflated tires: This reduces the contact area between the tire and the ground, leading to a significant increase in pressure and wear per unit area. It can easily result in loss of braking control, blowouts when encountering bumps or potholes, damage to the vehicle's suspension system, and discomfort during rides. 2. Underinflated tires: This increases the contact area between the tire and the ground, causing abnormal temperature rises inside the tire while driving. Additionally, severe deformation of the tire sidewalls accelerates the aging of the steel cord layers, increasing the risk of blowouts, higher fuel consumption, and reduced tire lifespan.
10
5
Share

Why does my left leg shake when pressing the clutch during driving practice?

Shaking in the left leg when pressing the clutch during driving practice may be caused by high tension. Relaxing and avoiding nervousness can help. Prolonged practice with the leg maintaining the same position can also lead to shaking and a twitching sensation. Taking a short break or moving the legs slightly can alleviate this. Below is an introduction to the four driving test subjects: 1. Subject 1: Also known as the theoretical test or driver's theory test, it is part of the motor vehicle driver's license assessment. 2. Subject 2: Also known as the small road test, it includes five test items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. 3. Subject 3: Also known as the big road test, it assesses road driving skills in the motor vehicle driver's test. 4. Subject 4: Also known as the theoretical test or driver's theory test.
17
1
Share

How to Turn Off the Maintenance Light on Honda Inspire?

Honda Inspire maintenance light reset steps are as follows: Step 1: Turn on the ignition and start the engine. Step 2: Press and hold the TRIP maintenance reset button located below the left air vent on the dashboard (do not release after pressing). Step 3: When the mileage and OILLIFE start flashing, release the maintenance reset button. Step 4: Turn off the engine, then restart it to check if the maintenance reminder has been successfully reset. Step 5: If the maintenance reminder fails to reset, repeat the above steps several times until successful. Additional information: The Honda Inspire is positioned as Dongfeng Honda's flagship sedan. It was officially launched in October 2018, equipped with either a 1.5T turbocharged engine (260TURBO) or a 2.0L i-MMD hybrid powertrain, offering a total of 7 variants. The Dongfeng Honda INSPIRE measures 4910mm/1862mm/1450mm in length/width/height with a 2830mm wheelbase.
7
4
Share

What happens if you release the clutch and then step on the brake?

If you step on the brake while in gear, the engine will stall. If in neutral, stepping on the brake has no effect. Below are the relevant explanations: 1. At low speeds: For a manual transmission car, if the car is stationary and you press the brake fully without disengaging the clutch, the engine cannot drive the car, causing the crankshaft to stop moving and the engine to stall. While moving, as long as the car's speed is higher than the speed corresponding to the engine idle speed at the current transmission gear ratio, the car will not stall. 2. At high speeds: When decelerating, if the speed is above 40, it is advisable to brake while in gear (this effectively utilizes the engine's resistance to decelerate, reduces brake pad wear, and avoids clutch wear). After the speed drops below 40, you can then press the clutch to shift to neutral or engage a suitable lower gear.
8
1
Share

Does the EA211-DJS Engine Burn Oil?

ea211-djs engine burns oil. The following are the reasons related to the EA211 engine burning oil: 1. Low-quality oil or incorrect viscosity grade: Low-quality oil can lead to increased wear. Additionally, oil viscosity that is too low or too high can cause poor engine lubrication, increasing wear on piston rings and cylinder walls, reducing sealing performance, and leading to oil burning; 2. Overfilling of oil: When the oil level exceeds the midpoint, due to high oil pressure, parts lubricated by splash lubrication during engine operation can enter the combustion chamber and burn excessively; 3. Turbocharger oil leakage: The turbo shaft of the turbocharger is lubricated by floating bearings. This type of vehicle has an oil passage leading to the turbocharger. Leakage in the pipeline or bearings may cause oil to seep from the turbocharger into the exhaust pipe. When the exhaust pipe temperature is high, the oil is baked and emitted as blue smoke.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.