Where is the engine number located on the Changan Alsvin V3?

1 Answers
VanPeter
07/29/25 7:16pm
The engine number of the Changan Alsvin V3 is located at the lower part of the cylinder block, on the side connected to the exhaust pipe and transmission. You can find the engine number next to the engine model number, which typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle license shows the engine number, usually located on the second last line; The motor vehicle registration certificate records the engine number; The car purchase invoice indicates the engine number; The vehicle purchase tax payment certificate states the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number refers to the production number of the engine. Each engine can only have one engine number, and the number of each engine is unique.
Was this review help?
4
1
Share
More Forum Discussions

What Type of Engine Oil Should Be Used for a New Car

It is recommended to use full synthetic engine oil. Synthetic engine oil can make the car more durable, more powerful, reduce the frequency of oil changes, and also save on gasoline expenses. Therefore, although the price of synthetic oil is 1-2 times more expensive than ordinary mineral oil, it is still the best choice for many car owners. Currently, engine oils on the market can be simply divided into two types based on the base oil: 1. Mineral oil 2. Synthetic oil. Synthetic oil can be further divided into semi-synthetic and full synthetic oils. The biggest difference between mineral oil and synthetic oil lies in the fact that synthetic oil has a wider temperature range for use, a longer service life, and higher costs. For the same oil film requirements, synthetic oil can achieve this with a lower viscosity, whereas mineral oil requires a relatively thicker viscosity compared to synthetic oil to meet the same requirements. In the same working environment, synthetic oil has a much longer service life than mineral oil, hence the higher cost. However, when comparing the number of oil changes, it is not much higher than mineral oil.
10
1
Share

Is a temperature of 120°C normal for a BMW 316?

A temperature of 120°C is not normal for a BMW 3 Series. The optimal operating temperature for a vehicle is around 90°C, with the normal operating temperature range being between 85°C and 115°C. If the temperature consistently stays above 120°C, it indicates an abnormal condition, and it is advisable to have it checked at a 4S dealership. Insufficient Coolant: Coolant leaks or low coolant levels can cause the engine temperature to rise. In such cases, the coolant level should be checked. If it is low, first top it up to the appropriate level, then monitor the level over the next few days to see if it drops significantly. If it does, the source of the leak should be identified and repaired. Faulty Cooling Fan: A malfunctioning cooling fan can prevent the heat generated during high-speed operation from being effectively transferred to the coolant, impairing the cooling process. This can lead to an increase in coolant temperature, potentially causing overheating issues.
17
2
Share

What is the fuel consumption of the Enclave 1.3t?

Enclave 1.3t fuel consumption is 7.88L/100km. Carbon deposit issue: Many car owners probably think of carbon deposits first when they notice an increase in fuel consumption. Carbon deposits are like grease on a range hood—hard to deal with. Carbon deposits can affect the compression ratio, leading to poor ignition, leaner air-fuel mixture, and fuel adsorption, all of which impact fuel consumption. Air filter: The air filter can also affect a car's fuel consumption. When the air filter hasn't been replaced for a long time, clogging can reduce the engine's air intake, which in turn increases fuel consumption.
13
4
Share

Should I buy the Audi A3 with 1.4T or 2.0T?

Here is the relevant introduction about Audi A3 1.4T and 2.0T: 1. Engine Introduction: The Audi A3 mainly promotes the 1.4T turbocharged engine, and there is also a 2.0T turbocharged engine available for selection, both matched with a 7-speed dual-clutch transmission. In terms of chassis, the Audi A3 adopts the form of front MacPherson and rear multi-link. 2. Power Aspect: The 35TFSI model is still equipped with the high-power version of the EA211 1.4T turbocharged engine, with a maximum power of 110kW (150PS) and a maximum torque of 250N·m. These figures remain quite competitive in the current market. The 40TFSI model, on the other hand, uses the third-generation EA888 2.0T engine with a fuel hybrid injection system, boasting a maximum horsepower of 140kW (190PS) and a torque of up to 320N·m, providing very ample power. The transmission is still paired with the 7-speed S-tronic dual-clutch gearbox, which has been time-tested in Volkswagen and Audi models, demonstrating excellent performance and reliability.
15
4
Share

What model is the Mercedes-Benz WDDUG5FB?

Mercedes-Benz WDDUG5FB is the vehicle model (WDDUG5FB) manufactured by: Daimler AG, Germany. The first letter 'W' in the VIN indicates that it is an imported Mercedes-Benz. Mercedes-Benz is a world-renowned luxury car brand. In January 1886, Karl Benz invented the world's first three-wheeled automobile and obtained a patent (Patent No.: DRP37435[1]), earning him the title of 'the inventor of the automobile'. At the same time, Gottlieb Daimler, another founder of Mercedes-Benz, invented the world's first four-wheeled automobile. From then on, the world was changed. In June 1926, Daimler-Motoren-Gesellschaft merged with Benz & Cie. to form Daimler-Benz AG. Automobiles bearing the Mercedes-Benz name represent high-quality and high-performance automotive products. In addition to premium luxury cars, Mercedes-Benz is also one of the world's most famous manufacturers of buses and heavy-duty trucks. Mercedes-Benz is a company under the Daimler AG group.
19
4
Share

Difference Between 9-Speed and 6-Speed Transmissions

9-speed and 6-speed automatic transmissions differ mainly in the number of forward gears. Comparatively, the 9-speed transmission offers better power performance, higher transmission efficiency, and closer gear ratios, resulting in smoother gear shifts and lower fuel consumption. An automatic transmission with manual mode combines both manual and automatic gear functions. It is a type of automatic transmission that allows manual gear selection. The manual mode in these transmissions differs from pure manual transmissions; although they include a clutch mechanism, it does not require driver intervention, meaning the clutch operates automatically. A conventional automatic transmission typically includes a neutral gear, drive gear, first hill-climbing gear, second hill-climbing gear, and reverse gear. In addition to these, an automatic transmission with manual mode provides a function for the driver to manually shift gears, usually marked as '+' and '-' gears. These transmissions combine both manual and automatic gear functions and are a type of automatic transmission that allows manual gear selection. They do not have a clutch pedal because they are still automatic transmissions, and the clutch is not controlled by the driver.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.