Where is the engine number located on the Buick Excelle?

2 Answers
DelRowan
07/29/25 7:54pm
The engine number of the Buick Excelle is located in the engine compartment, below the direction of the engine pulley. The engine number is the unique identifier of the engine, similar to a person's ID card, with each engine having a distinct number. Engine numbers are composed of a head, middle, rear, and tail section, representing information such as the product code, number of cylinders, manufacturing details, and structural characteristics. The Buick Excelle is a compact sedan produced by SAIC-GM Buick, with body dimensions of 4468mm in length, 1765mm in width, and 1469mm in height. The Excelle is equipped with a 1.3-liter naturally aspirated engine across all models, with options for a 5-speed manual transmission or a CVT continuously variable transmission.
Was this review help?
16
4
Share
Bo
08/14/25 3:39pm
As a car owner, I've searched for the Buick Excelle's engine number several times. Typically, after opening the hood, you need to look for the metal surface of the engine block in the engine compartment. The specific location is usually on the front or right side of the cylinder block, near the exhaust manifold. The number is engraved quite deeply, but if the car has been driven for a long time and accumulated dust or oil stains, it can be hard to see. I usually wipe it clean with a cloth or spray some cleaner before checking. Once, when I went to the DMV to handle some paperwork and had to verify the number, it took me quite a while to find it because it was positioned quite deep—I had to bend down and use a flashlight to see it properly. If you're also an owner and encounter a similar situation, don’t get discouraged. The design of the Excelle is fairly consistent across different model years, and the number is usually in this general location. If you’re really struggling, taking a photo and zooming in might help. Remember, this number is used for registration and maintenance checks, so it’s a good idea to glance at it occasionally during car washes to avoid frustration in emergencies. In short, with a little patience, you’ll always find it.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

How to reset the maintenance light on Audi S3?

Audi S3 maintenance light reset method: 1. Press and hold the button next to the odometer, turn ignition switch ON; 2. SERVICE or SERVICEIN will appear on the LCD display; 3. Release the button, press the button on the left side of the instrument panel (near the tachometer) to reset the display, and SERVICEIN10000MI will appear on the LCD; 4. Turn ignition switch to OFF position. For interior features, the Audi S3 comes with a three-spoke sport steering wheel, gray-white dashboard needles, combined with all-black interior, giving the new car's cabin a thoroughly sporty style.
16
2
Share

How many cylinders does the Sylphy engine have?

Sylphy is equipped with a four-cylinder engine. The Sylphy uses a 1.6-liter naturally aspirated four-cylinder engine with the model code HR16, delivering a maximum power of 102 kW and a maximum torque of 169 Nm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. The Sylphy is a compact family sedan under the Nissan brand, with a wheelbase of 2,712 mm and dimensions of 4,641 mm in length, 1,815 mm in width, and 1,450 mm in height. The front suspension of the Sylphy employs a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The torsion beam rear suspension is designed to maximize rear passenger space and trunk capacity.
15
0
Share

Is the engine of the Mazda3 a three-cylinder or four-cylinder?

The engine of the Mazda3 is a four-cylinder. In terms of power, the Mazda3 offers a choice between a 1.5-liter naturally aspirated engine and a 2.0-liter naturally aspirated engine. The 1.5-liter version delivers a maximum horsepower of 117 hp, a maximum power of 86 kW, and a maximum torque of 148 Nm. The Mazda3 is a compact car under Changan Mazda, with dimensions of 4662 mm in length, 1797 mm in width, and 1445 mm in height, and a wheelbase of 2726 mm. For the suspension, the Mazda3 features a MacPherson strut front suspension and a torsion beam rear suspension.
4
4
Share

What are the reasons for failing the written test (Subject 1)?

It might be due to insufficient practice. Here are some methods for Subject 1 preparation: 1. Directly judge right/wrong: These keywords in questions indicate correct answers: prohibited, must not, cannot, do not, yield by stopping, yield by slowing down, avoid by slowing down, wait in line, preserve the scene, keep right; These keywords indicate wrong answers: accelerate, unnecessary, no need, coast in neutral, emergency brake, refuse to yield, immediately. 2. Overtaking restrictions: Never overtake these vehicles: ambulances, fire trucks, police cars on emergency duty, rescue vehicles; Never overtake in these areas: crosswalks, narrow roads, curves, narrow bridges, railroad crossings, tunnels.
15
1
Share

What are the dimensions of the Lavida car?

The dimensions of the Lavida car are: for the sedan version, the length, width, and height are 4670 mm, 1806 mm, and 1474 mm respectively, with a wheelbase of 2688 mm; for the hatchback version, the length, width, and height are 4541 mm, 1806 mm, and 1488 mm respectively, with a wheelbase of 2688 mm. The Lavida's in-car navigation system combines touch screen and rotary knob controls, and includes MP3 playback capability, supporting USB, AUX, and SD card expansion slots for ease of use and powerful functionality. The LCD screen features a foldable design. The Lavida is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam semi-independent suspension.
10
1
Share

Which model is the Sylphy 59800?

Sylphy 59800 refers to the Sylphy Classic model. The exterior of the Sylphy Classic is quite similar to the newer models, but the rear emblem has been updated—newer models feature the SYLPHY Classic badge. The Sylphy 59800 is positioned as a family-oriented compact car, with dimensions of 4641mm in length, 1815mm in width, and 1450mm in height, and a wheelbase of 2712mm. It is powered by a 1.6L naturally aspirated engine, delivering a maximum power of 139 horsepower and a peak torque of 169 Nm. The transmission options include a 5-speed manual gearbox and a CVT (continuously variable transmission).
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.