···
Log in / Register

Where is the engine number located on a Suzuki Swift?

4 Answers
DeSawyer
07/29/25 5:50pm
Suzuki Swift's engine number is located at the bottom of the engine, near the connection point with the transmission. You can see it by opening the shock absorber cover in front of the passenger seat. The engine number is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and engine attributes. It represents information such as the manufacturer, specifications, performance, features, craftsmanship, intended use, and production batch of the engine. The Suzuki Swift is a model launched by Changan Suzuki, positioned as a compact car with body dimensions of 3765mm (length) × 1690mm (width) × 1510mm (height) and a wheelbase of 2390mm. The Swift features a fashionable and attractive exterior design, with rounded and full front-end lines, smooth waistlines, and a flat-roof silhouette that exudes youthful vitality.
Was this review help?
3
3
Share
OEliza
08/14/25 9:34am
I remember driving my Suzuki Swift for almost a decade, and the engine number is hidden in the engine compartment, usually stamped on the top or right side surface of the engine block. It’s visible as soon as you lift the hood. Every time I do minor maintenance, like changing the oil, I always make a habit of glancing at that spot—it’s quite noticeable but tends to accumulate dust and grease, so I wipe it clean with a soft cloth for a clearer look. It’s crucial for vehicle registration and insurance, allowing quick verification of the car’s identity if any issues arise. If you can’t find it, don’t panic—follow the wiring near the ignition coil or check the manual’s diagram. Safety first: never touch it while the engine is running to avoid burns. A quick clean during regular car washes will keep it legible.
Was this review help?
10
3
Share
Expand All
McElle
10/14/25 2:37am
When I first drove a Suzuki Swift, I also couldn't figure out where the engine number was. Later, I figured it out: after opening the front hood, just lean into the front of the car and look inside. It's mostly located on the top left side of the engine, often engraved on a metal surface. As a beginner, this spot is easy to reach and feel around. If the lighting is poor, just bring a small flashlight to illuminate it. I usually check if it matches the VIN code first, because the VIN number under the windshield is also important and can help with vehicle inspection. Don't worry if you can't find it; you can ask a repair shop or 4S store to help locate it. Remember to check it regularly, as it's useful for maintenance records.
Was this review help?
6
5
Share
Expand All
CaliLynn
11/27/25 3:33am
Having driven all my life, I always remember the Suzuki Swift's engine number is located in the middle of the engine compartment, specifically on the surface of the engine block near the front. When I was younger, I often forgot its exact position, but now that I'm older, I've learned: when you open the hood, it's engraved right there, sometimes covered by oil sludge. Safety is paramount, so always ensure the car is turned off and the handbrake is engaged when checking. Just like the license plate number, it's a crucial part of the vehicle's identity.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

What Are the Hazards of Disconnecting the Negative Terminal of a Car Battery?

Disconnecting the negative terminal of a car battery will result in a complete loss of power, rendering the vehicle unable to start. Before disconnecting the battery, ensure the ignition is turned off to prevent damage to electrical devices and vehicle control modules. Below is an introduction to car batteries: Battery Overview: A car battery, also known as a storage battery, is a type of battery that converts chemical energy into electrical energy. Battery Classification: Batteries are categorized into conventional batteries, dry-charged batteries, and maintenance-free batteries. Typically, when people refer to a car battery, they mean a lead-acid battery. The normal lifespan of a car battery ranges from 1 to 8 years, depending largely on the vehicle's condition. Battery Principle: It uses lead plates filled with sponge lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and a 22% to 28% dilute sulfuric acid solution as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy.
10
5
Share

What are the early symptoms of a failing fuel pump?

Early symptoms of a failing fuel pump: inability to reduce speed, stuck fuel supply rack, and fluctuating engine speed. Specific details are as follows: Inability to reduce speed: False racing refers to a situation where the diesel engine starts with normal idle speed, but after accelerating and releasing the throttle, the speed does not decrease. This occurs when the injector plunger is worn out, and the rack is set to idle fuel quantity at the idle position. Once the throttle is pressed to increase speed and then released, the rack can return to the idle position, but the governor's moving parts and transmission mechanism, due to excessive wear, get stuck in the high-speed position, preventing the speed from decreasing. If this phenomenon occurs, the fuel injection pump must be inspected and repaired. Stuck fuel supply rack: If the high-pressure fuel line does not deliver fuel, but the low-pressure fuel circuit has fuel, and the diesel engine fails to start, it indicates that the fuel supply rack is stuck in the non-fuel supply position. In this case, the fuel injection pump also needs immediate inspection and repair. Fluctuating engine speed: This is a sign that the fuel supply rack is not flexible, or the internal components of the governor are excessively worn, leading to increased clearance. Therefore, the fuel injection pump also needs to be inspected and repaired.
18
1
Share

Why does the steering wheel feel lighter after installing winter tires?

The reason the steering wheel feels lighter after installing winter tires is that the tire pressure is too high. Explanation: It should be noted that if the steering feels lighter after changing tires, it likely indicates the new tires have excessive air pressure. The principle is simple - if the original tires had normal pressure but the new ones have higher pressure, this reduces rolling resistance, making steering naturally lighter. Importance of proper tire pressure: Both underinflation and overinflation affect tire lifespan and fuel consumption. Overinflation concentrates vehicle weight on the tread center, causing rapid center wear. Underinflation leads to uneven contact area, increased wear, higher rolling resistance, and greater fuel consumption.
5
1
Share

What Causes Severe Shaking When Slowly Releasing the Clutch in First Gear?

Reasons for car shaking when slowly releasing the clutch: Uneven pressure distribution in the car's clutch, incorrect pressure position; or the clutch pressure spring is too strong; oil contamination or breakage of the driven disc lining; bending of the main or driven disc, inconsistent height of the release levers. The following are details about the clutch: Function of the Clutch: The role of the clutch pedal switch is to ensure smooth starting of the car, achieve smooth gear shifting, and prevent overload of the transmission system. The switch on the clutch pedal is a normally closed switch. When the clutch is depressed, the switch opens, and the engine control unit does not receive a signal from the clutch, indicating that the engine connection is to be disconnected. Therefore, it reduces the ignition advance angle and decreases fuel injection for power reserve. Working Principle of the Clutch: The driving and driven parts of the clutch transmit torque through the friction between contact surfaces, or use liquid as a transmission medium (hydraulic coupler), or magnetic transmission (electromagnetic clutch), allowing temporary separation and gradual engagement, while permitting mutual rotation of the two parts during transmission.
14
4
Share

What does d+m+ mean?

M+ means upshifting, while M- means downshifting. The M1/M2/M3 displayed on the instrument panel represent manual mode gears 1/2/3 respectively. The number of gears in M mode depends on the automatic transmission's gear count - for example, a 7-speed M mode has 7 gears. Below are details about M mode: Introduction to M mode: M mode is the manual mode in automatic transmission vehicles. When shifted to M mode, you can manually control the transmission's upshifts or downshifts without needing to depress the clutch, and the engine won't stall - just like regular automatic transmission. Usage of M mode: M mode is particularly useful during overtaking, uphill/downhill driving, slippery road conditions (rain/snow), cornering, and high-speed driving. For example, using m- to downshift during overtaking provides higher torque, allowing the vehicle to accelerate quickly.
19
0
Share

What is the regalgs Buick?

regalgs, also known as the Regal GS, is a model under the Buick brand, classified as a mid-to-high-end sedan. The relevant details about the Regal GS are as follows: Exterior of the Regal GS: It features an elegant, understated, and contemporary exterior design, paired with a secure and user-friendly refined interior and advanced high-tech configurations, giving it a more sporty overall appearance. Its positioning falls between the Excelle and LaCrosse. Configurations of the Regal GS: With its grand and modern design, the Buick Regal GS boasts a high-end V6 engine that perfectly combines powerful performance with smooth and quiet operation, along with superior safety features and various luxurious technological amenities. It meets the high demands of social elites for their vehicles, ensuring a consistently smooth and comfortable driving experience.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.