Where is the engine number located on a Jinbei minivan?

1 Answers
OLola
07/30/25 10:07am
Jinbei vehicles have their engine number located on the middle right side of the engine, near the oil filter. It is typically a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be found through the following 4 ways: The vehicle's driving license prints the engine number, usually located on the second-to-last line; The motor vehicle registration certificate records the engine number; The car purchase invoice records the engine number; The vehicle purchase tax payment certificate records the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number, however, refers to the production serial number of the engine. Each engine can only have one engine number, and every engine's number is unique.
Was this review help?
2
3
Share
More Forum Discussions

Why is the rear air vent of the RX300 not blowing air?

The rear air vent of the RX300 is automatic, so it blows air when someone is detected and defaults to closing when no one is present. Below is more information about the Lexus RX300: 1. Exterior: It features high-intensity headlights with automatic adjustment, integrating high beam, low beam, and turn signals into one unit, seamlessly blending with the strong and simple front design. Additionally, it automatically adjusts the light axis based on driving conditions, providing a wider range of illumination. The integrated taillights use an elegant crystal-clear lens and LED technology, with a layered design that perfectly merges with the rear of the vehicle. 2. Interior: The leather seats are ergonomically designed and come with electric sliding and automatic return functions, ensuring maximum comfort for passengers. The seatbacks can tilt forward and backward, and the rear seats can be split and adjusted in a 40:20:40 ratio, offering flexible space variations.
20
0
Share

What to Do When a Car's Clutch is Heavy?

There are four solutions for a heavy car clutch: 1. Check if the clutch pedal, release bearing, etc., return to their normal positions. If normal, proceed with further checks. 2. Inspect whether the fixing bolts of the engine bracket, transmission, flywheel, flywheel housing, etc., are loose. If so, tighten the bolts; otherwise, continue checking. 3. Verify if the inner ends of the release levers are on the same plane. If they are, proceed with further checks. 4. Examine whether the pressure plate and driven plate are deformed, if the rivets are loose or exposed, and if the clamping spring force is outside the allowable range. If any of these conditions exist, replace or repair the affected parts. Additional Information: Shuddering during start-up can be considered from the perspective of an unsteady clutch engagement process during starting. That is, the engine rotates uniformly, but due to unsteady clutch engagement, the driven part of the clutch rotates unsteadily, resulting in vibrations in the clutch and even the entire vehicle body.
12
1
Share

What to Do If the Vehicle Fails the Environmental Protection Inspection?

Solutions for failing the environmental protection inspection are as follows: 1. If CO, HC, and NO are all exceeding the standards, it indicates a malfunction in the vehicle's three-way catalytic converter and oxygen sensor. In this case, the three-way catalytic converter and oxygen sensor should be cleaned, and replacement may be necessary if required. 2. If only CO and HC exceed the standards, it is generally due to a fault in the vehicle's intake system, along with carbon buildup in the cylinders. In this situation, it is essential to clean the engine carbon deposits and the vehicle's intake system promptly. 3. If only CO exceeds the standard, it is usually caused by incomplete combustion of fuel and the air-fuel mixture in the engine cylinders. In this case, check the air filter and spark plugs, clean them in time, and replace them if necessary. 4. If CO and HC exceed the standards, and the vehicle emits a large amount of black smoke upon starting: This is typically caused by severe wear of the engine cylinders, requiring the replacement of components such as piston rings and cylinder heads.
18
1
Share

What is EBP on a vehicle?

EBP is a fuel-saving switch, primarily used in tractors and trucks. The EBP Intelligent Energy-Saving System is equivalent to having three gear selection options for the engine, allowing free selection based on different road conditions and load capacities. This ensures the engine operates within the optimal fuel economy range, achieving fuel-saving effects. Below are the relevant details: 1. EBP, short for "Multi-State Fuel-Saving Switch," is mainly applied in tractors and trucks. The EBP Intelligent Energy-Saving System functions like a three-gear selector for the engine, enabling free selection according to varying road conditions and loads to keep the engine running in the most fuel-efficient range, thus saving fuel. 2. The working principle of EBP is as follows: different positions of the fuel-saving switch correspond to different resistance values. The ECU detects varying voltage values, allowing the engine to operate in different states. Each state is calibrated to correspond to specific torque and speed ranges, ensuring the engine operates within the designated torque and speed limits based on the selected gear. E mode: Used when unloaded; B mode: Used when partially loaded; P mode: Used when fully loaded.
12
1
Share

Where is the license plate number with 'Hei M' from?

Hei M is the license plate code for Suihua City, Heilongjiang Province. The license plate codes for other regions in Heilongjiang Province are as follows: Hei A for Harbin, Hei B for Qiqihar, Hei C for Mudanjiang, Hei D for Jiamusi, Hei E for Daqing, Hei F for Yichun, Hei G for Jixi, Hei H for Hegang, Hei J for Shuangyashan, Hei K for Qitaihe, Hei L for counties and county-level cities under Harbin, Hei N for Heihe, Hei P for Daxing'anling, and Hei R for Heilongjiang Agricultural Reclamation Administration Bureau (Reclamation Area). The following is an introduction to license plates: 1. The first character of a license plate number is a Chinese character representing the provincial administrative region, and the second is a letter representing the code of the prefecture-level administrative region. 2. The function of a license plate number is to identify the region to which the vehicle belongs, and the owner and registration information of the vehicle can also be found based on the license plate.
12
5
Share

How Often Should Engine Oil Be Changed for Small Cars?

It is recommended to change the engine oil every 5,000 kilometers or once a year for cars. Below are detailed guidelines regarding engine oil changes: 1. For new cars, it is advisable to change the engine oil after driving 3,000 kilometers. The oil change interval can be adjusted based on different driving environments and habits. 2. Mineral oil should be changed within 5,000 kilometers, and the interval should not exceed this mileage. Semi-synthetic oil allows for a slightly extended oil change interval up to 7,500 kilometers, while full synthetic oil can extend up to 10,000 kilometers. The specific interval depends on the type of oil used in the vehicle. 3. There are three types of engine oil: full synthetic, semi-synthetic, and mineral oil. Full synthetic oil should be changed every 10,000 kilometers or once a year; semi-synthetic oil every 7,500 kilometers or every 7-8 months; and mineral oil every 5,000 kilometers or every 6 months. Prolonged failure to change the engine oil can lead to oil degradation, reduced lubrication effectiveness, insufficient lubrication of internal engine components during operation, increased wear of engine parts, and shortened engine lifespan.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.